With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!right Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

Xcore lid lock (without cylinder) as a practical replacement part for Xcore luggage systemSecures the suitcase lid, protecting equipment from unauthorized accessWithout cylinder to reuse the existing oneCost-effective solution for replacing the lock without changing the cylinderEasy installation using existing attachment points of the Xcore caseMaintains equipment security and ensures reliable case closure

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the left C-bow saddlebag holder!Lockable leather bag for left C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Lockable leather bag for holder tube typeIncl. Key and cylinder3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Sturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the C-bow saddlebag holder!Lockable leather bag for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the C-bow saddlebag holder!Lockable leather bag for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Lockable leather bag for holder tube typeIncl. Key and cylinder3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Sturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the left C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

Only the right side!With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.A model-specific tube saddlebag carrier is required for assembly (not included)Features:Handmade in our leather factoryHighest leather and processing qualityLeather from European animal husbandryTanning according to strict environmental regulationsMade from 3-4 mm strong full-grain cowhide, tear-resistant seamsStability by concealed form and reinforcement partsReinforced plastic backRobust belt buckles and high-quality accessoriesBags lockableInner bag and rain cover as a recommended accessoryrecommended loading: 5-7kg each bag (please check model specific carrier information for limitations)HOW TO FIX THE BAGS TO THE CARRIER:1. Standard permanent mounting (extra charge, see accessories 700429) Version for self-assembly with fixing set for fixed mounting on the saddlebag holder(Saddlebags not removable). For this purpose, holes must be drilled into the rear wall of the saddle pocket.NOTE: The saddlebag only fits on the saddlebag holder attached after mounting the holding clamps.A change of model requires new drilling.Please note: it is no longer possible to exchange a saddle bag with the holding clamps.We recommend the C-Bow version of the saddle bag (if a C-Bow saddlebag carrier is offered for your motorbike).Here is no self-assembly necessary and a change of model on another bike with C-Bow problem-free possible.2. Quick-release fastener Self-assembly (extra charge, see accessories 700403)Another option when using a saddlebag holder is our quick-release fastener.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:For self-assembly, holes must be drilled into the rear wall of the saddle pocket.Furthermore, a tool for processing pop rivets is necessary.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling.Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible.3. Quick-release fastener Factory-assembly (for an extra charge, see accessories 700402)On-site assembly by us guarantees professional assembly and perfect fit for a small extra charge.For this purpose, saddle bag and saddlebag holder must be ordered together with the assembly by us.If you order only one bag, the saddlebag holders must be embeded as each bag is individually mounted.Please note: it is no longer possible to exchange a saddle bag with a quick-release fastener.

Only left side!With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.A model-specific tube saddlebag carrier is required for assembly (not included)Features:Handmade in our leather factoryHighest leather and processing qualityLeather from European animal husbandryTanning according to strict environmental regulationsMade from 3-4 mm strong full-grain cowhide, tear-resistant seamsStability by concealed form and reinforcement partsReinforced plastic backRobust belt buckles and high-quality accessoriesBags lockableInner bag and rain cover as a recommended accessoryrecommended loading: 5-7kg each bag (please check model specific carrier information for limitations)HOW TO FIX THE BAGS TO THE CARRIER:1. Standard permanent mounting (extra charge, see accessories 700429) Version for self-assembly with fixing set for fixed mounting on the saddlebag holder(Saddlebags not removable). For this purpose, holes must be drilled into the rear wall of the saddle pocket.NOTE: The saddlebag only fits on the saddlebag holder attached after mounting the holding clamps.A change of model requires new drilling.Please note: it is no longer possible to exchange a saddle bag with the holding clamps.We recommend the C-Bow version of the saddle bag (if a C-Bow saddlebag carrier is offered for your motorbike).Here is no self-assembly necessary and a change of model on another bike with C-Bow problem-free possible.2. Quick-release fastener Self-assembly (extra charge, see accessories 700403)Another option when using a saddlebag holder is our quick-release fastener.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:For self-assembly, holes must be drilled into the rear wall of the saddle pocket.Furthermore, a tool for processing pop rivets is necessary.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling.Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible.3. Quick-release fastener Factory-assembly (for an extra charge, see accessories 700402)On-site assembly by us guarantees professional assembly and perfect fit for a small extra charge.For this purpose, saddle bag and saddlebag holder must be ordered together with the assembly by us.If you order only one bag, the saddlebag holders must be embeded as each bag is individually mounted.Please note: it is no longer possible to exchange a saddle bag with a quick-release fastener.

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!right Lockable leather bag for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.A model-specific tube saddlebag carrier is required for assembly (not included, please check MY BIKE)Features:Handmade in our leather factoryHighest leather and processing qualityLeather from European animal husbandryTanning according to strict environmental regulationsMade from 3-4 mm strong full-grain cowhide, tear-resistant seamsStability by concealed form and reinforcement partsReinforced plastic backRobust belt buckles and high-quality accessoriesBags lockableInner bag and rain cover as a recommended accessoryrecommended loading: 5-7kg each bag (please check model specific carrier information for limitations)HOW TO FIX THE BAGS TO THE CARRIER:1. Standard permanent mounting (kit included)Version for self-assembly with fixing set for fixed mounting on the saddlebag holder(Saddlebags not removable). For this purpose, holes must be drilled into the rear wall of the saddle pocket.NOTE: The saddlebag only fits on the saddlebag holder attached after mounting the holding clamps.A change of model requires new drilling.Please note: it is no longer possible to exchange a saddle bag with the holding clamps.We recommend the C-Bow version of the saddle bag (if a C-Bow saddlebag carrier is offered for your motorbike).Here is no self-assembly necessary and a change of model on another bike with C-Bow problem-free possible.2. Quick-release fastener Self-assembly (extra charge, see accessories 700403)Another option when using a saddlebag holder is our quick-release fastener.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:For self-assembly, holes must be drilled into the rear wall of the saddle pocket.Furthermore, a tool for processing pop rivets is necessary.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling.Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible.3. Quick-release fastener Factory-assembly (for an extra charge, see accessories 700402)On-site assembly by us guarantees professional assembly and perfect fit for a small extra charge.For this purpose, saddle bag and saddlebag holder must be ordered together with the assembly by us.If you order only one bag, the saddlebag holders must be embeded as each bag is individually mounted.Please note: it is no longer possible to exchange a saddle bag with a quick-release fastener.

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the left C-bow saddlebag holder!left Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bag hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right Rugged Cutout side carrier!Lockable leather bag for right Rugged Cutout carriersmodel specific carrier is needed. Please check My BikeIncl. fastening kitIncl. Key and cylinderyou only need these bags and the model specific Rugged Cutout carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Sturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing qualityHOW TO FIX THE BAGS TO THE CARRIER:Quick-release fastenerThis bags has a quick release kit within delivery.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:If you order these bags and the model specific carrier, we will prepare the bags with the quick release kit, so it will fit perfectly to the carrier.If you only order the bags, we need to know, to what carrier it will be attached, so we also can premount the quick release kit.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling and is not always possible!Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible. 

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!Lockable leather bag for right C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

Xcore Replacement Lid in Black allows replacement or renewal of the case lidSpecifically designed for Xcore case without attachmentsBlack replacement lid for a new look or replacing damaged/worn-out lidsMaintains functionality and protection of the caseEasy installation using existing attachment points of the Xcore caseQuick restoration and fresh appearance of the case

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.A model-specific tube saddlebag carrier is required for assembly (not included, please check MY BIKE)Features:Handmade in our leather factoryHighest leather and processing qualityLeather from European animal husbandryTanning according to strict environmental regulationsMade from 3-4 mm strong full-grain cowhide, tear-resistant seamsStability by concealed form and reinforcement partsReinforced plastic backRobust belt buckles and high-quality accessoriesBags lockableInner bag and rain cover as a recommended accessoryrecommended loading: 5-7kg each bag (please check model specific carrier information for limitations)HOW TO FIX THE BAGS TO THE CARRIER:1. Standard permanent mounting (kit included)Version for self-assembly with fixing set for fixed mounting on the saddlebag holder(Saddlebags not removable). For this purpose, holes must be drilled into the rear wall of the saddle pocket.NOTE: The saddlebag only fits on the saddlebag holder attached after mounting the holding clamps.A change of model requires new drilling.Please note: it is no longer possible to exchange a saddle bag with the holding clamps.We recommend the C-Bow version of the saddle bag (if a C-Bow saddlebag carrier is offered for your motorbike).Here is no self-assembly necessary and a change of model on another bike with C-Bow problem-free possible.2. Quick-release fastener Self-assembly (extra charge, see accessories 700403)Another option when using a saddlebag holder is our quick-release fastener.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:For self-assembly, holes must be drilled into the rear wall of the saddle pocket.Furthermore, a tool for processing pop rivets is necessary.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling.Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible.3. Quick-release fastener Factory-assembly (for an extra charge, see accessories 700402)On-site assembly by us guarantees professional assembly and perfect fit for a small extra charge.For this purpose, saddle bag and saddlebag holder must be ordered together with the assembly by us.If you order only one bag, the saddlebag holders must be embeded as each bag is individually mounted.Please note: it is no longer possible to exchange a saddle bag with a quick-release fastener.

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the C-bow saddlebag holder!Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.Only for the right C-bow saddlebag holder!right Lockable leather bags for C-bow carriersIncl. C-Bow counter support on the back wall of the bagIncl. Key and cylinderyou only need these bags and the model specific C-Bow carrier. No other adapters needed.3-4mm thick cow leatherRecommended load: 5kg per side (please check info of model specific carrier)Does not fit a tube saddlebag carrier; Only for C-Bow carrierSturdy back wall made of ABS plasticTanning according to strict environmental regulationsLeather from European animal husbandryHighest processing quality

Only right side!With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any chopper. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.A model-specific tube saddlebag carrier is required for assembly (not included)Features:Handmade in our leather factoryHighest leather and processing qualityLeather from European animal husbandryTanning according to strict environmental regulationsMade from 3-4 mm strong full-grain cowhide, tear-resistant seamsStability by concealed form and reinforcement partsReinforced plastic backRobust belt buckles and high-quality accessoriesBags lockableInner bag and rain cover as a recommended accessoryrecommended loading: 5-7kg each bag (please check model specific carrier information for limitations)HOW TO FIX THE BAGS TO THE CARRIER:1. Standard permanent mounting (extra charge, see accessories 700429) Version for self-assembly with fixing set for fixed mounting on the saddlebag holder(Saddlebags not removable). For this purpose, holes must be drilled into the rear wall of the saddle pocket.NOTE: The saddlebag only fits on the saddlebag holder attached after mounting the holding clamps.A change of model requires new drilling.Please note: it is no longer possible to exchange a saddle bag with the holding clamps.We recommend the C-Bow version of the saddle bag (if a C-Bow saddlebag carrier is offered for your motorbike).Here is no self-assembly necessary and a change of model on another bike with C-Bow problem-free possible.2. Quick-release fastener Self-assembly (extra charge, see accessories 700403)Another option when using a saddlebag holder is our quick-release fastener.This allows the saddle bag to be removed from the saddle pocket holder at any time, and the closure also securesby the handling in the pocket inside the bag against theft.NOTE:For self-assembly, holes must be drilled into the rear wall of the saddle pocket.Furthermore, a tool for processing pop rivets is necessary.The saddle bag fits only after the quick-release fastener has been attached to that saddlebag holder.A change of model requires new drilling.Please note: an exchange of a saddlebag with a quick-release fastener is no longer possible.3. Quick-release fastener Factory-assembly (for an extra charge, see accessories 700402)On-site assembly by us guarantees professional assembly and perfect fit for a small extra charge.For this purpose, saddle bag and saddlebag holder must be ordered together with the assembly by us.If you order only one bag, the saddlebag holders must be embeded as each bag is individually mounted.Please note: it is no longer possible to exchange a saddle bag with a quick-release fastener.