HONDA CBR 500 R Accessories
Here you will find all model-specific products available and accessories for HONDA CBR 500 R
- the model-specific rear protection developed for CBR 500 R
- Our CBR 500 R kickstand enlarger for improved stability and a more secure footing
- Side case carriers as well as our patented C-Bow side carrier for CBR 500 R
- The sporty rear luggage solution replacing the passenger seat: the Sportrack
- Our premium top case carriers such as the Alurack or Easyrack
You will also find the corresponding luggage items with the respective carriers in the accessories section.
Rear protection bar anthracite for Honda CBR 500 R (2013 - 2015)
£213.34*
For selected motorbike models frequently used in riding schools, from 125cc to 750cc, we offer special front and rear guards that can be combined with our engine guards.good protection in the event of falls and crashes at low speedsTurn signals, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protectedhigh-quality powder coatingincl. mounting materialWe offer special conditions for driving schools. Please get in touch with our contact persons. Tel: 06331/1453-222 or mail: shop@hepco-becker.de
Side stand plate silver/black for Honda CBR 500 R (2013-2015)
£51.60*
Side stand extension Honda CBR 500 R (2013-2015)
To widen the contact surface of the side stand - for absolutely secure standing on gravel, sand, crushed stone, etc.
Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter-holder - Made in Germany.
Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand.
To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker.
The side stand support is enlarged to approximately double the surface area compared to the original stand, so your CBR 500 R is perfectly protected from mishaps when parking.
Material: Aluminium & powder-coated steel
Colour: silver / black
Developed specifically for the Honda CBR 500 R
For model year(s): 2013, 2014, 2015
Effective protection when parking
Quick and easy installation with just a few screws
ABE & registration free
Centre stand black for Honda CBR 500 R (2013 - 2015)
£222.88*
Stable. Stable. Easy to use. The centre stands from Hepco&Becker usually do not restrict the rider's lean angle and are extremely robust. Thanks to the sophisticated geometry and non-slip tread surface, it is very easy to park the motorbike safely in any situation.The precisely manufactured stands are very stable, sandblasted, primed and black powder-coated and therefore weatherproof and stable in value. Main stands simplify maintenance work and ensure a secure stand, e.g. when refuelling. They relieve the load on the suspension elements and the rear wheel during winter storage.ABE is suppliedusually no restriction on lean angle clearancehigh-quality surface finishScope of delivery: Main stand + mounting material + instructionsplease note the installation instructions providedHelpful tool for attaching the tension spring: item number: 700030
C-Bow side carrier anthracite for Honda CBR 500 R (2013-2015)
£196.00*
C-Bow side bag holder for Honda CBR 500 R (2013-2015) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Side case carrier Lock-it anthracite for Honda CBR 500 R (2013-2015)
£293.99*
The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm
Easyrack top case carrier anthracite for Honda CBR 500 R (2013-2015)
£225.48*
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.
Alurack top case carrier anthracite/black for Honda CBR 500 R (2013-2015)
£199.46*
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.
Sport rack black for Honda CBR 500 R (2013-2015)
£196.00*
Sports rack for Honda CBR 500 R (2013-2015), black The problem of securing luggage on supersports bikes is well known - but Hepco&Becker also has a suitable solution for this: Our sports rack, which is anchored in the original mount instead of the pillion seat and is opened using the vehicle ignition key. All conceivable items of luggage can be transported securely with fastening options all round, e.g. with luggage straps, and can also be extended with a widening to accommodate large luggage rolls and sea bags. The Sportrack looks like a pillion seat cover and therefore blends in perfectly with the look. And that's not all - in addition to the perfectly matching, discreet look, riding enjoyment is of course also unaffected - thanks to the secure attachment of the luggage directly behind the rider in a streamlined manner, the riding behaviour of your machine is not negatively affected in any way!The sport rack for CBR 500 R from Hepco&Becker is the perfect addition for your next adventure! Features & details:Material (luggage plate): 4mm thick aluminiumFinish: High-quality powder coatingColour: blackYears of construction: 2013, 2014, 2015 Scope of delivery:Sport rack plate, mounting counterholderScrew set (contains all parts required for installation)easy-to-understand, illustrated installation instructions (DE + EN)vibration-damping rubber buffers & sealing tapeImportant notes: Quickly removable, in the same principle as the pillion seat Only suitable for topcases in combination with our Journey topcases 30/40 in the universal version with plastic plate. Normal Hepco&Becker top cases with metal retaining lock on the top case base do not fit! can be combined with our rear panniers with basic lock can be extended with luggage rack extension No ABE or registration is required for this product if fitted as intendedplease note the model-specific information listed in the installation instructions and the featuresunless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbikerestrictions may apply if conversion or accessory parts, such as seat benches, have already been installed