The black C-Bow side carriers for the Honda CBF 500 (2004-2007), CBF 600 (2004-2007), CBF 600 (2008-2013), and CBF 1000 (2006-2011) are sturdy carriers for attaching Hepco&Becker C-Bow side bags and cases to your motorcycle. These carriers are specifically designed to securely and reliably mount the C-Bow bags. The side carriers feature a high-quality surface finish. However, please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these carriers. Likewise, Krauser K-Wing cases are not intended for use with the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. It's important to follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier. It's important to know that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers. The carriers are specifically designed for the stock condition of your machine. However, please note that they have not been tested with accessories such as exhausts, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate light emission angle. The exhaust stream should not be directed toward the bags.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

A sleek black main stand designed for the Honda CBF 500 (2004-2007) – steadfast, stable, and easy to handle. HEPCO&BECKER's main stands stand out for their tendency not to restrict lean angle freedom during rides, while being extremely robust. With their sophisticated geometry and a non-slip surface, parking the motorcycle securely becomes effortless in any situation. These precisely crafted stands are exceptionally stable and are sandblasted, primed, and finished with a black powder coating, making them weather-resistant and durable. They not only simplify maintenance tasks but also ensure a secure stance, especially during refueling or in other scenarios. During winter storage, they relieve stress from suspension components and the rear wheel, contributing to the motorcycle's extended lifespan. Included in the package is a General Operating Permit (ABE), and in most cases, the stand does not limit lean angle freedom. The high-quality surface finish gives it an appealing appearance. The package contains the main stand, mounting material, and a detailed instruction manual for easy installation. Please refer to the enclosed assembly instructions for a smooth setup. The helpful tool recommended for attaching the tension spring is item number 700030.

The black Easyrack top case carrier has been specifically designed for your Honda CBF 500 models from 2004 to 2007. With this carrier, you have the opportunity to conveniently expand the storage space on your motorcycle. It consists of a model-specific installation kit and an Easyrack adapter plate, allowing you to attach Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack seamlessly integrates into the overall look of your motorcycle. The combination of high-quality aluminum and a sturdy steel base ensures not only durability but also an appealing appearance. Additional attachment points in the design allow for secure installation of luggage rolls or other accessories. The solid construction made of steel and aluminum ensures longevity and stability. Included in the package are the model-specific carrier, an installation kit, and a comprehensive installation manual. Additional adapters are not required to securely mount Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically comparable to the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, whereas the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for straightforward installation. The luggage carrier is exempt from ABE or registration requirements and fulfills all relevant legal standards. The recommended load capacity is 5 kg. Please refer to the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in the side cases or the tank bag to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h (80 mph) to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

The black front guard for the Honda CBF 600 (2004-2007) offers reliable protection. Specifically designed for low speeds, it ensures good defense against falls and accidents. It effectively protects not only turn signals, clutch and brake levers, exhaust mufflers, and bodywork parts but also other crucial components. The high-quality powder coating not only enhances its appearance but also guarantees durability. The mounting materials required for installation are included. We offer special conditions for driving schools. Please contact our representatives at Tel: 06331/1453-222 to learn more.

The black Alurack top case carrier from Hepco & Becker is specifically designed for the Honda CBF 500 (model years 2004-2007). This carrier consists of a model-specific mounting kit and an Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plates). Each Alurack top case carrier is developed specifically for the model, seamlessly integrating into the overall look of the motorcycle. Constructed using high-quality aluminum in combination with a steel base carrier, the Alurack boasts high strength and a stylish appearance. Additional attachment points for luggage straps, for example, to secure luggage rolls, are integrated into the design of the carrier. The solid base construction is made of steel and an aluminum carrier plate. The package includes the model-specific Alurack top case carrier, a mounting kit, and an installation manual. No additional adapters for top case mounting are required. The surface finish is of high quality. Technically, the Alurack top case carrier functions nearly the same as the Easyrack top case carrier. The difference is that the bracket for top case mounting on the Alurack is fixed in an upward position and cannot be folded down. The model-specific base carrier is identical for both the Easyrack and the Alurack. To mount the Hepco & Becker Alu Standard top case 35, a special bracket is required instead of the regular Alurack bracket (item number: 700007350 or 700007351). Luggage carriers do not require a General Operating Permit (ABE) or registration. The recommended payload is 5 kg (please refer to model-specific instructions found in the installation manual and the motorcycle manufacturer's specifications). Heavy luggage should generally not be transported in the top case but in the side cases or tank bag. The recommended maximum speed is 130 km/h. The Alurack top case carrier was developed for the motorcycle's standard configuration and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.

The black Lock-it side case carrier from Hepco & Becker is specifically designed for the Honda CBF 500 (model years 2004-2007). This carrier is made of German steel tubing and custom laser-cut parts that are additionally reinforced at heavily stressed points. The carriers can be attached and removed in seconds. To do this, simply loosen the attached Lock-it screws by a quarter turn, and the side parts can be removed to the rear or to the side. Optional lockable Lock-it screws can be used for theft protection. All cases are locked on the carrier using a locking mechanism located on the case. Locking adapters are usually included in the case's package. These locking adapters are screwed onto the carrier on the right and left sides, providing a mounting point for the case's locking mechanisms. The carrier is characterized by a sturdy construction "MADE IN GERMANY" and is made of German steel tubing. After removal, only inconspicuous small tabs remain on the motorcycle. The surface is of high quality. Installation is generally straightforward; please refer to the included installation manual for details. The package includes the right and left sides of the carrier, as well as the necessary mounting materials and an installation manual. Any restrictions can be found in the vehicle-specific instructions or the installation manual. The carrier is suitable for most Hepco & Becker hard-shell side cases (please note model-specific instructions). Luggage systems generally do not require a General Operating Permit (ABE) or registration. The tube diameter is 16 mm.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.