A black main stand for the BMW F 650 GS Dakar (2004-2007) / G 650 GS Sertao (2012-2016) – steadfastness, stability, and easy handling all in one. HEPCO&BECKER's main stands typically do not compromise lean angles and are extremely robust. Thanks to their thoughtful geometry and a non-slip surface, parking the motorcycle securely is effortless in any situation. These precisely crafted stands are highly stable, sandblasted, primed, and black powder-coated, making them weather-resistant and durable. Main stands simplify maintenance tasks and provide a stable support, especially during refueling. In winter, they also relieve strain on spring elements and the rear wheel. Included is an ABE (General Operating Permit), usually not limiting the lean angle. The high-quality surface finish emphasizes the quality of this accessory. You'll receive the main stand, mounting materials, and instructions. Please refer to the provided installation guide for optimal setup. Please take note of the attached assembly instructions for optimal installation. A helpful tool (item number: 700030) for attaching the tension spring is also available.

Conquer the roads with the Hepco&Becker Lock-it side case carrier in black for your BMW G 650 GS (2011-2016) or Sertao (2012-2016). This side case carrier is crafted from high-quality German steel tubing and custom laser-cut parts, further reinforced at high-stress areas. What sets this carrier apart is its effortless attachment and removal. Simply turn the integrated Lock-it screws a quarter turn, and you can easily remove the side panels by sliding them backward or to the side. For additional security against theft, the carriers can be optionally protected from sticky fingers with our lockable Lock-it screws. All cases are secured to the carrier by a locking mechanism located on the case itself. To accomplish this, you'll need the lock adapters, which are typically included in the case's package. These lock adapters are fastened to the carrier on the right and left sides, providing a secure attachment point for the case's locking mechanisms. The robust construction is MADE IN GERMANY and is known for its reliability. The side case carrier can be quickly removed, leaving only inconspicuous small tabs on the motorcycle. Thanks to the high-quality surface finish, the carrier retains its appealing appearance even over the long term. Installation is usually straightforward - please refer to the included installation manual. Included in the package are the right and left side case carriers, along with the necessary mounting hardware and a detailed installation manual. Any restrictions, if applicable, can be found in the vehicle-specific notes or the installation manual. The side case carrier is compatible with most Hepco&Becker hard-shell side cases (please refer to model-specific notes). Luggage systems generally do not require ABE (German type approval) or registration. With a tubing diameter of 16 mm, this carrier strikes the ideal balance between stability and aesthetics.

Discover the silver Rohrgepäckbrücke top case carrier from Hepco&Becker for your BMW G 650 GS (2011-2016) or Sertao (2012-2016). These proven Rohrgepäckbrücken top case carriers offer the highest quality and are specifically designed for Hepco&Becker top cases. Hepco&Becker luggage carriers are not only compatible with our latest top cases but also allow for the mounting of older models, as the basic attachment has remained unchanged. Please note that the Hepco&Becker Orbit top cases and top cases with a universal plate are not compatible. The carriers are model-specific and only fit the motorcycle listed in the installation instructions. Manufactured from high-quality German steel, Hepco&Becker luggage carriers provide maximum strength and security. Thanks to the high-quality coating, the luggage carrier retains its appealing appearance even over the long term when properly maintained. If you wish to transport soft luggage, the Rohrgepäckbrücke offers various attachment options. If space is insufficient, the bridge can be easily combined with the Hepco&Becker Universalgepäckbrückenverbreiterung. The recommended maximum load is 5 kg (please refer to the model-specific instructions in the installation manual and the motorcycle manufacturer's specifications). Heavy loads should generally not be carried in the top case but rather in the side cases or tank bag. The Rohrgepäckbrücke can usually be combined seamlessly with side case carriers or C-Bow holders (please refer to the installation instructions). The package includes the mounting hardware and a detailed installation manual. Made in Germany ensures top-notch quality and craftsmanship. The top case is slid onto the Rohrgepäckbrücke and secured to the carrier with a metal locking mechanism. Luggage carriers generally do not require ABE (German type approval) or registration.

These high-quality matte black C-Bow side carriers have been specifically designed for the BMW G 650 GS (model years 2011-2016), G 650 GS Sertao (model years 2012-2016), as well as the F 650 GS and F 650 GS Dakar (up to 2007). These carriers are solidly constructed and allow for the attachment of Hepco&Becker C-Bow side bags and cases. These carriers are characterized by their premium surface finish. It is important to note that conventional Hepco&Becker hard cases like the Junior or Journey are not compatible with this carrier. Similarly, Krauser K-Wing cases are not suitable for mounting on this C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Please follow the installation instructions, consider model-specific guidelines, and check the manufacturer's specifications for any restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. Follow the installation instructions or model-specific guidelines for the respective carrier. However, be aware that luggage rack extensions can affect the attachment of bags to the carrier. This luggage carrier does not require a General Operating Permit (ABE), and it does not need to be registered in the vehicle documents. Please be aware that this carrier was specifically designed for the stock condition of the motorcycle and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags always have an adequate distance from the exhaust, and the turn signals maintain an adequate beam angle. The exhaust stream must not be directed at the bags.

solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessoriesThe aluminum engine guard for the BMW G 650 GS (2011-2016) and Sertao (2012-2016) provides your motorcycle with reliable protection against stone chips, dirt, and other challenges you may encounter on your adventure rides. Made from high-strength aluminum, this engine guard is particularly robust and durable. It is specifically designed for the BMW G 650 GS and Sertao and perfectly complements the motorcycle's shape. The engine guard protects the engine block and other sensitive parts of your motorcycle from damage caused by flying stones, dirt, or uneven surfaces on the road or off-road. This allows you to enjoy worry-free off-road adventures and feel safe on the road. In addition to its protective function, the engine guard also adds an individual look to your motorcycle. It emphasizes the character of the BMW G 650 GS and Sertao and gives them a touch of adventure and sportiness. The installation of the engine guard is simple and straightforward. All necessary mounting parts are included, allowing you to easily attach the guard. Please refer to the assembly instructions and model-specific notes to ensure a perfect fit. Ensure additional protection and give your BMW G 650 GS or Sertao an individual touch – with the aluminum engine guard for the G 650 GS (2011-2016) and Sertao (2012-2016).

Our black headlight guard for the BMW G 650 GS (2011-2016) and Sertao (2012-2016) not only provides reliable protection for your headlight but also gives your motorcycle a rugged and individual look. This headlight guard is specifically designed for the mentioned models of the BMW G 650 GS, perfectly matching their adventurous spirit. The headlight guard effectively shields your headlight from stone impacts, insects, and other external elements that may occur during your rides. At the same time, it gives your BMW G 650 GS or Sertao a distinctive appearance and highlights their off-road capability. Installation is straightforward, as the headlight guard attaches to the existing mounting points on your motorcycle. It is made from high-quality steel and features a durable black coating that protects against corrosion and ensures a long-lasting lifespan. Please note that this headlight guard is supplied without TÜV approval. Make sure to adhere to the applicable local regulations and laws when using it.

The black engine guard by Hepco&Becker for the BMW G 650 GS (2011-2016)/Sertao (2012-2016) is a reliable companion, whether you're navigating rugged off-road trails, cruising on highways, or maneuvering through urban landscapes. This guard provides comprehensive protection against unexpected mishaps while adding a personalized touch to your bike. Manufactured in our facility in Pirmasens, Germany, this guard is crafted from high-quality materials and features a robust tube-in-tube construction, ensuring reliable safety. Newer models come equipped with integrated crash pads for additional protection. Installation is straightforward, thanks to the easily understandable instructions that guide you through the process step by step. You'll receive all the necessary materials for both right and left sides along with a detailed guide. The best part: This quality product, made in Germany, doesn't require any additional approvals or registrations. For official driving schools, we offer special conditions. For any queries or special requests, our customer service is available at Tel: (+49) 0 6331 / 1453 - 222.