Our high-quality C-Bow side carriers in matte black have been specifically designed for the Ducati Multistrada 1200/S (model years 2010-2014). These robust carriers allow for the attachment of Hepco&Becker C-Bow side bags and cases and are characterized by their excellent surface finish. Please note that conventional Hepco&Becker hard cases like the Junior or Journey are not compatible with this carrier. Similarly, Krauser K-Wing cases do not fit on the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Make sure to follow the installation instructions, consider model-specific guidelines, and check the manufacturer's specifications for any restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. Please follow the installation instructions or model-specific guidelines for the respective carrier. However, keep in mind that luggage rack extensions can affect the attachment of bags to the carrier. This luggage carrier does not require a General Operating Permit (ABE), and it does not need to be registered in the vehicle documents. Please be aware that this carrier was specifically designed for the stock condition of the motorcycle and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags always have an adequate distance from the exhaust, and the turn signals maintain an adequate beam angle. The exhaust stream must not be directed at the bags.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The black Easyrack top case carrier is designed to fit the Ducati Multistrada 1200 and 1200 S models from 2010 to 2014. This carrier expands the transportation capabilities of your motorcycle and allows for the mounting of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The Easyrack has been designed specifically to seamlessly integrate into the appearance of your Ducati Multistrada 1200/S. It consists of a sturdy steel base construction and an aluminum carrier plate, ensuring high strength and an elegant look. Included in the package are the model-specific Easyrack top case carrier, an installation kit, and a detailed installation manual. No additional adapters are required to attach Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically the same as that of the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, while the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack is identical to the Alurack, allowing for easy installation. The luggage carrier is exempt from ABE or registration requirements and complies with all relevant legal regulations. The recommended load capacity is 5 kg. Please follow the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in a top case or a backpack to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Are you looking for a black Alurack top case carrier for your Ducati Multistrada 1200/S (2010-2014)? Our top case carrier, consisting of a model-specific mounting kit and the Alurack adapter plate, is perfect for carrying Hepco&Becker top cases or soft luggage (not compatible with top cases featuring a universal plastic plate). Each Alurack top case carrier is specifically designed for the respective model to seamlessly integrate with the overall appearance of your motorcycle. The combination of high-quality aluminum and a steel base carrier provides the Alurack with high strength and an elegant look. Additional attachment points for luggage straps are integrated into the rack's design, allowing you to securely fasten items such as luggage rolls. The basic construction consists of steel and an aluminum carrier plate. Included in the package are the model-specific Alurack top case carrier, the mounting kit, and an installation manual. No additional adapters for top case attachment are required. The Alurack features a high-quality surface finish and offers almost the same functionality as the Easyrack top case carrier. The difference is that the top case mounting bracket on the Alurack is fixed in an upright position and cannot be folded down. The model-specific base carrier is identical for both the Easyrack and Alurack. For the attachment of the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the standard Alurack bracket (part numbers: 700007350 or 700007351). Luggage carriers do not require ABE (General Operating Permit) or registrations. The recommended load capacity is 5 kg (please refer to the model-specific notes in the installation manual and the manufacturer's specifications). Heavy luggage should generally not be transported in the top case but in the side cases or tank bag. The recommended maximum speed is 130 km/h. Please note that the carrier is designed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.