Initializing My BIKE
R 1250 GS Adventure (2019-)

Here you can find model-specific accessories for your bike. Matching luggage or other accessories are listed with the respective carriers and parts.

Filter
Nova LED additional headlight set incl. universal attachment
With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 22 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.3 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

£257.78*
Small Sport Star Rack rear bag for belt attachment on original rear rack BMW R 1200/1250/1300 GS / LC / Adventure
SMALL SPORT STAR RACK BMW R 1200 GS/LC especially designed for the original rack BMW R1200 GS and LC Item-no. 640003 00 00  SPORT STAR The universal rear bag The alternative to a tank bag. The Sport Star looks great and needs no additional handles or holders. Depending on the model, it is fastened with straps to the seat or to a rear rack.With a zipper and compression straps, its capacity can vary, depen- ding on the version. 

£86.20*
Kickstand enlargement for BMW R1250GS Adventure (2019-)
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

£49.38*
Toolbox for side carrier Cutout, Lock-it and permanent mounted universal kit
Inside dimensions: 29x8 cm (length / diameter) Dimensions: 32x9 cm Volume: 1.5 liters it is model-specific mounted on the inside of a side luggage carrier to utilize this space model-specific mounting kit waterproof screw cap perfect for driving tools, safety vests or similar matters.

£51.89*
Handle guard set black (left+right side) for BMW R1250GS Adventure (2019-)
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

£142.29*
Easyrack topcasecarrier black for BMW R1250GS Adventure (2019-)
The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

£215.11*
Handle guard set blue (left+right side) for BMW R1250GS Adventure (2019-)
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

£164.05*
Protection plate for BMW original Center stand for BMW R1250GS Adventure (2019-)
Aluminium-Schutzplatte für Original-Hauptständer für BMW R 1250 GS Adventure (2019-)

£82.02*