BMW R 1300 GS Accessories

Here you will find model-specific products and accessories for BMW R 1300 GS (2023-).
Depending on availability for your bike – you can find the following example products and more here:

C-Bow carrier & luggage Sidecarrier for your R 1300 GS
Protection & Crash bars for BMW R 1300 GS
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting ring for a tank bag for R 1300 GS

As well as many other comfort and accessory items for your Motorcycle!
Fitting Cases & Bags, Topcases and Tankbags etc. are also linked as related products for their relative carriers.

Nova LED additional headlight set incl. universal attachment

With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

£268.40*

Handle guard set black (left+right side) for BMW R 1300 GS (2023-)

Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

£180.60*

Universal crash bar bags V1 (set)

Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities. for universal mounting to engine guards and tank guards high stability very low weight abrasion-resistant coating water-repellent and incl. smaller waterproof bag on the inside lockable 2-way zipper Recommended max. speed 130km / h

£149.12*

Engine guard black for BMW R 1300 GS (2023-)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER engine guard follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£259.73*

Small Sport Star Rack rear bag for belt attachment on original rear rack BMW R 1200/1250/1300 GS / LC / Adventure

SMALL SPORT STAR RACK BMW R 1200 GS/LC especially designed for the original rack BMW R1200 GS and LC Item-no. 640003 00 00 SPORT STAR The universal rear bag The alternative to a tank bag. The Sport Star looks great and needs no additional handles or holders. Depending on the model, it is fastened with straps to the seat or to a rear rack.With a zipper and compression straps, its capacity can vary, depen- ding on the version.

£106.30*

Kickstand enlargement for BMW R 1300 GS (2023-) for model with adaptive vehicle height control

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

£51.60*

Tankring BASIC incl. fastener for tankbag for BMW R 1300 GS (2023-)

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

£32.95*

Tankguard black for combination with H&B engine guard 5016532 for BMW R 1300 GS (2023-)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£288.44*

Sidecarrier permanent mounted black for BMW R 1300 GS (2023-)

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

£263.16*

Carrier for original BMW R 1300GS (2023-) fog lights for combination with Hepco&Becker tank guard

in conjunction with Hepco&Becker tank protection barOriginal BMW additional headlights not includedSpecial holder for the original BMW additional headlights

£46.96*

Engine guard stainless steel for BMW R 1300 GS (2023-)

£381.32*

C-Bow sidecarrier for BMW R 1300 GS (2023-)

C-Bow sidecarrier for BMW R 1300 GS (2023-) The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check the manual for more info. Special carrier only for Hepco&Becker C-Bow bags and boxes Regular Hepco&Becker hard luggage does not fit Krauser K-Wing luggage does not fit High-quality surface finish Delivery: right side, left side, mounting kit, manual Easy mounting Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info) Rear rack enlargements can possibly restrict the function of the bags Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators. When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

£226.52*

Kardan Protection for BMW R 1300 GS (2023-)

Safe Hepco&Becker aluminum protection for the cardan.folded and welded from 3mm aluminum Made in GermanyExtremely stable construction Mounting on existing screw points includes mounting material and instructions

£125.32*

Kickstand enlargement for BMW R 1300 GS (2023-) for model without special chassis equipment

£61.40*

Easyrack topcasecarrier black for BMW R 1300 GS (2023-)

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

£272.45*

Headlight grill for BMW R 1300 GS (2023-)

A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

£127.97*

Tankguard stainless steel for combination with H&B engine guard 5016532 for BMW R 1300 GS (2023-)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£345.20*

Tankguard stainless steel for combination with original BMW engine guard for BMW R 1300 GS (2023-)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£360.68*

Tube rear rack - black for BMW R 1300 GS (2023-)

The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructionsOnly suitable for models with a universal plate when mounting the top case.

£272.96*

Protection plate for original center stand for BMW R 1300 GS (2023-)

£81.53*

Alurack top case carrier black for BMW R 1300 GS (2023-)

The Hepco&Becker Alurack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Easyrack topcasecarrier: the bow which stands upwards for the topcasemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu Topcase Standard 35, you need a special bow adapter: 700007351 or 700007350

£241.49*

Modelspecific rear enlargement for BMW R 1300 GS (2023-)

high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

£190.40*

Engine protection plate black for BMW R 1300 GS (2023-)

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

£307.02*

Engine protection plate aluminium for BMW R 1300 GS (2023-)

£288.44*