A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

Stable HEPCO&BECKER aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

Experience ultimate protection and style with Hepco&Becker's black engine guard for the BMW R 1150 GS (2000-2004)/Adventure (2001-2005). Whether you're adventuring through rough terrains or cruising through the bustling city streets, this crash bar is an essential companion that effectively shields your motorcycle from unexpected situations. Its functionality goes beyond mere protection during falls. You can securely strap down your motorcycle, ensuring its safety even during transport. The high-quality metal coating not only adds an aesthetic appeal but also ensures durability, effortlessly meeting the demands of off-road adventures or daily commuting. The solid construction, proudly made in Germany at our Pirmasens facility, features an extremely robust tube-in-tube design. This design seamlessly complements your bike's lines, imparting it with an individualistic character. Some models even come equipped with integrated crash pads for added protection. Mounting this guard is a breeze, thanks to the comprehensive and user-friendly installation manual included for both sides – right and left. Any specific instructions for your vehicle can be found in the provided guidelines or installation manual. The best part? You don't need to worry about ABE or registrations – this product is ready for immediate use. Additionally, we offer special conditions for official driving schools to promote safety in training. Our customer service is available for any inquiries at Tel: (+49) 0 6331 / 1453 - 222.

The black Tank Guard Bars by HEPCO&BECKER for the BMW R 1150 GS (2000-2004) / Adventure (2001-2005) perfectly match the motorcycle's lines, giving it a distinctive character. They provide outstanding protection to safeguard both the motorcycle and the rider from substantial damage in case of a tip-over or unintended ground contact, ensuring optimal protection. A prudent investment to prevent costly repairs in unforeseen accidents. The material efficiently absorbs the impact forces. After a fall, it's advisable to replace the crash bars as welding seams and the material might have incurred unseen damages, compromising their protective capability in subsequent falls. Individual parts or sides can be easily ordered via email. These bars shield the tank, side fairings, and the front structure, featuring a high-quality surface finish and proving useful for securing the motorcycle. They are crafted from sturdy round tubing, made in Germany. Included in the package are parts for the right and left sides along with the complete mounting hardware. Engine guard bars do not require registration or ABE. Please refer to the provided installation manual and the model-specific notes for any potential limitations.

The chrome Engine Guard Bars by Hepco&Becker for the BMW R 1150 GS (2000-2004) / Adventure (2001-2005) are always the right choice, whether you spend most of your time off-road, on the highways, or within the city. Your motorcycle is consistently protected against unexpected mishaps. Moreover, in the event of a fall or unintended ground contact, these bars can effectively protect the motorcycle and the rider from significant damage. Hepco&Becker's protective bars perfectly follow the lines of the machine, giving the motorcycle an individual character. They are made from an extremely robust tube-in-tube construction, with some newer models featuring integrated crash pads. Various surface finishes are available depending on the vehicle model. These bars offer protection in the event of falls and assist in securing the motorcycle. They boast a high-quality metal coating, are solidly constructed, and MADE IN GERMANY in our factory in Pirmasens. The package includes parts for the right and left sides, complete mounting material, and a comprehensive, easy-to-understand installation manual. Please refer to any potential limitations or instructions in the enclosed installation manual or the vehicle-specific notes. No ABE or registration is required. For official driving schools, we offer special conditions. Please contact our customer service at Tel: (+49) 0 6331 / 1453 - 222.

The silver Engine Guard Bars by Hepco&Becker for the BMW R 1150 GS (2000-2004) / Adventure (2001-2005) are always the right choice, whether you spend most of your time off-road, on the highways, or within the city. Your motorcycle is consistently shielded effectively against unexpected mishaps. More than that: In case of a fall or unintended ground contact, these bars can safeguard the motorcycle and the rider from significant damage. Hepco&Becker's protective bars perfectly follow the motorcycle's lines, adding an individual character. Crafted from an extremely robust tube-in-tube construction, newer models may come with integrated crash pads. Various surface finishes are available depending on the vehicle model. These bars offer protection in the event of falls and provide assistance when securing the motorcycle. They boast a high-quality metal coating, are solidly constructed, and MADE IN GERMANY in our factory in Pirmasens. The package includes parts for the right and left sides, complete mounting material, and a comprehensible installation guide. Please refer to potential limitations or instructions in the enclosed installation manual or the vehicle-specific notes. No ABE or registration is required. For official driving schools, we offer special conditions. Please contact our customer service at Tel: (+49) 0 6331 / 1453 - 222.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The silver Tank Guard Bars by HEPCO&BECKER for the BMW R 1150 GS (2000-2004) / Adventure (2001-2005) perfectly follow the lines of the motorcycle, adding an individual touch to its appearance. They are an essential safeguard, protecting both the motorcycle and the rider from significant damage in the event of a tip-over or unintended ground contact, offering optimal protection to avoid costly repairs in unforeseen accidents. The forces upon impact are efficiently absorbed by the material. After a fall, it's advisable to replace the tank guard bars as welding seams and the material might have incurred unseen damages, compromising their protective capability in subsequent falls. Individual parts or sides can be easily ordered via email. These bars safeguard the tank, side fairings, and the front structure, boasting a high-quality surface finish and proving useful for securing the motorcycle. They are crafted from sturdy round tubing, made in Germany. Included in the package are parts for the right and left sides along with the complete mounting hardware. Engine guard bars do not require registration or ABE. Please refer to the provided installation manual and the model-specific notes for any potential limitations.