Get your Kawasaki ER-6n/6f (2012-2016) ready for adventure with the elegant C-Bow Side Carrier in stylish black. This solid side carrier was specifically designed to accommodate Hepco&Becker C-Bow side bags and cases, adding a touch of sophistication to your motorcycle. The high-quality surface finish not only provides a premium look to this side carrier but seamlessly integrates with the overall aesthetics of your bike. Please note that regular Hepco&Becker hard-shell cases like the Junior or Journey are not compatible with this carrier. Similarly, Krauser K-Wing cases do not fit on the C-Bow carrier. For maximum safety and the ultimate riding experience, the recommended load is 5 kg per bag or case. Please follow the installation instructions, vehicle-specific guidelines, and the recommendations of the motorcycle manufacturer to avoid any potential limitations. The C-Bow Side Carrier can usually be combined without issues with top case carriers, sissy bars, or solo racks. Pay attention to the installation guide and vehicle-specific instructions for the respective carrier. Note that luggage rack extensions may restrict the attachment of bags to the carrier. The best part: The C-Bow Side Carrier does not require ABE certification or registration in your vehicle's papers. The package includes both the left and right carriers, a comprehensive installation guide, and the mounting kit. Designed for your bike's stock condition, this side carrier has not been tested with accessories such as exhaust systems, license plate holders, or turn signals. Please ensure that the bags have sufficient distance from the exhaust when using accessories and that the turn signals have an adequate beam angle to avoid directing the exhaust towards the bags.

Get your Kawasaki ER-6n/6f (2012-2016) ready for adventure with the sleek black Lock-it side case carrier by Hepco&Becker. This side case carrier is crafted from high-quality German steel tubing and custom laser-cut parts, reinforced at critical stress points. Mounting and dismounting these carriers is a breeze. Simply loosen the attached Lock-it screws with a quarter turn, and you can remove the side panels to the rear or to the side in no time. Optionally, we offer lockable Lock-it screws to secure the carrier against potential theft. All cases can be secured to the carrier using a built-in case lock. Typically, you'll need the lock adapters included with the case. These adapters are attached to the right and left sides of the carrier, providing a secure anchoring point for the case locking mechanisms. This side case carrier not only impresses with its sturdy "Made in Germany" construction but also with a high-quality surface finish. Installation is generally straightforward, and you can always refer to the included installation manual. The package includes both the right and left carriers, complete with mounting materials and an installation manual. Please note that for specific information about your vehicle and any potential restrictions, consult the vehicle-specific instructions or the installation manual. This Lock-it side case carrier fits most Hepco&Becker hard-shell side cases, but we recommend considering model-specific guidelines to ensure a perfect fit with your motorcycle. Generally, luggage systems do not require ABE (Allgemeine Betriebserlaubnis) or registration. Tube diameter: 16 mm

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

Enhance your Kawasaki ER-6n/6f (2012-2016) with the sleek black Alurack top case carrier. This top case carrier consists of a model-specific mounting kit and the Alurack adapter plate designed specifically for Hepco&Becker top cases or soft luggage (not suitable for top cases with a universal plastic plate). Each Alurack top case carrier is tailored to seamlessly blend into the overall appearance of your motorcycle. Crafted from high-quality aluminum in combination with a steel base carrier, the Alurack boasts high strength and an elegant aesthetic. Additional attachment points for luggage straps are integrated into the rack's design, allowing you to securely fasten items like luggage rolls. The robust foundation comprises steel and an aluminum support plate, ensuring reliability and longevity. The package includes the model-specific Alurack top case carrier, the mounting kit, and a comprehensive installation guide. No additional adapters are required for top case attachment. With its high-quality surface finish, this Alurack not only offers practical functionality but also adds an aesthetic touch to your motorcycle. From a technical perspective, it operates almost the same as the Easyrack top case carrier, with the distinction that the top case attachment bar remains fixed in the upward position and cannot be folded down. Please note that to accommodate the Hepco&Becker Alu Standard Top Case 35, a special attachment bar is required in place of the standard Alurack bar (part numbers: 700007350 or 700007351). Typically, luggage carriers do not require ABE (Allgemeine Betriebserlaubnis) or registration. The recommended maximum payload is 5 kg (please consult the model-specific guidelines, the provided installation manual, and the motorcycle manufacturer's specifications). Heavy loads should generally not be transported in the top case but in the side cases or tank bag. The recommended maximum speed is 130 km/h. Keep in mind that this carrier was developed for the stock condition of the motorcycle and has not been tested with aftermarket accessories such as exhaust systems, license plate holders, or other indicators.

hochwertige Oberflächenbeschichtungeinfache Montageinkl. Montagematerialstabile Konstruktion aus Stahl MADE IN GERMANYbenötigt keine ABE oder Eintragung in die Papiere

The Easyrack Topcase Carrier in black has been specifically designed for the Kawasaki ER-6n/6f (2012-2016). This carrier comes equipped with a model-specific installation kit and the Easyrack adapter plate, allowing the attachment of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The Easyrack Topcase Carrier has been designed to seamlessly integrate into the motorcycle's overall aesthetics. Constructed from high-quality aluminum in combination with a steel base, the Easyrack offers high strength and an attractive appearance. The base structure is made from steel and an aluminum carrier plate. The package includes the model-specific Easyrack Topcase Carrier, an installation kit, and an installation manual. No additional adapters are needed to mount top cases. The surface of the luggage carrier is finished with high-quality, and it shares a similar quality with the Alurack Topcase Carrier. The difference lies in the fact that the Easyrack's bracket for top case attachment can be folded down, while the Alurack's bracket remains fixed in an upward position. The model-specific base carrier is identical for both Easyrack and Alurack. A General Operating Permit (ABE) or registration is not required. The recommended load capacity is 5 kg. Please adhere to the model-specific instructions in the installation manual and consult the motorcycle manufacturer's specifications. It is recommended to avoid transporting heavy luggage in the top case and instead use the side cases or a tank bag. The maximum recommended speed is 130 km/h. The Easyrack Topcase Carrier has been developed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other indicators.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.