The Hepco&Becker complete carrier set in matte black is designed for the Honda CBX 600/650 E from the years 1983-1987. This set includes both a two-sided side case carrier and a tubular luggage rack for top cases. The installation is permanent and requires the installation of the entire set on the motorcycle. This carrier offers the possibility to install almost all Hepco&Becker side cases, and nearly all top cases from the Hepco&Becker range can be mounted on the tubular luggage rack. The side cases are securely locked to the carrier using a retaining lock. The lock adapters required for this, which are fastened to the right and left on the side case carrier, are included as standard in the case set. These model-specific and solidly constructed carriers are perfectly tailored to the respective motorcycle and reinforced with special inner tubes in areas subject to high stress. The construction is made of steel tubing and bears the "Made in Germany" quality seal. The carriers are permanently screwed to the motorcycle and are provided with a high-quality matte black surface coating. They can only be mounted as a set and generally fit most Hepco&Becker side cases and top cases. Restrictions can be found in the model-specific notes or in the installation instructions. The delivery includes the right carrier, the left carrier, the tubular luggage rack for the rear, the mounting material, and an installation manual. The tube diameter is 16 mm, and luggage carriers generally do not require a General Operating Permit (ABE) or registration.