HONDA CB 500 X Accessories

Here you will find model-specific products and accessories for HONDA CB 500 X (2013-2016).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:

C-Bow carrier & luggage Sidecarrier for your CB 500 X
Protection & Crash bars for HONDA CB 500 X
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for CB 500 X

As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags, Topcases and Tankbags etc. are also linked as related products for their relative carriers.

Nova LED additional headlight set incl. universal attachment

With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

£268.40*

Universal crash bar bags V1 (set)

Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities. for universal mounting to engine guards and tank guards high stability very low weight abrasion-resistant coating water-repellent and incl. smaller waterproof bag on the inside lockable 2-way zipper Recommended max. speed 130km / h

£125.32*

Tankguard anthracite for Honda CB 500 X (2013-2016)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£184.28*

Engine protection bar anthracite for Honda CB 500 X (2013-2016)

£193.39*

Sidecarrier Lock-it anthracite for Honda CB 500 X (2013-2016)

Outstanding fit - every HEPCO&BECKER Lock-it sidec carrier is precisely tuned to the particular type of motorcycle. This results in a very high precision on the motorcycle. Made of steel tube and custom-made laser parts, which are reinforced once more in highly stressed areas. The quality of Lock-it side carriers has already been confirmed several times in trade magazines.The carriers can be installed and removed within seconds. To do this you just have to loosen the lock-it screws with a quarter turn and you can remove the side parts backwards or sideways. As an anti-theft device you can optionally protect the carrier with our Lock-it screws against thefts (item number: 151050).All cases are closed by means of a quick release fastener on the carrier. For this you need the aluminum adapters (item number 700114) which are usually within delivery of the sidecases. The aluminum adapters are screwed to the rear right and left of the carrier and then offer an attachment option for the locks of the suitcase.For all Hepco & Becker side cases / hard cases / Aluminium boxessolid constructionFast detachable, remaining only unobtrusive small tabs on the motorcycleHigh quality surface finishsimple assembly, please refer to the enclosed mounting instructionsScope of delivery: right + left incl. Installation material and assembly instructionsPlease refer to the vehicle specific instructions or the assembly instructionsRecommended load: 10kg per side case

£285.75*

Alurack top case carrier anthracite/black for Honda CB 500 X (2013-2016)

The Hepco&Becker Alurack is especially designed for our top cases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker top cases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the top case (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker top caseAttention: Hepco&Becker top case with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker top cases with a metal look on the bottomcan mostly be combined with C-Bow side carrier or normal hard lugagge side carrier: Please check manual or bike specific infoDifference to the Easyrack top case carrier: the bow which stands upwards for the top casemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350

£193.39*

Pillion seat grab anthracite for Honda CB 500 X (2013-2016)

To make it easier for the passenger we offer: can be combined with Sidecarrier Lock-it can't be combined with Topcasecarrier Alurack or Easyrack

£89.32*

Kickstand enlargement for Honda CB 500 X (2013-2016)

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

£51.60*

C-Bow sidecarrier for Honda CB 500 X (2013-2016)

C-Bow sidecarrier for Honda CB 500 X (2013-2016) The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check the manual for more info. Special carrier only for Hepco&Becker C-Bow bags and boxes Regular Hepco&Becker hard luggage does not fit Krauser K-Wing luggage does not fit High-quality surface finish Delivery: right side, left side, mounting kit, manual Easy mounting Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info) Rear rack enlargements can possibly restrict the function of the bags Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators. When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

£190.35*

Easyrack topcasecarrier anthracite for Honda CB 500 X (2013-2016)

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

£219.41*

Rear protection bar anthracite for Honda CB 500 X (2013-2016)

For selected motorcycle models from 125ccm to 750ccm, commonly and frequently used in driving schools, we also offer special HEPCO&BECKER front- and rearguards, which of course can be combined with our other crash bars. provides protection in case of accidents and falls effectively protects turn signals, clutch and brake levers, mufflers, fairings, fenders, etc. components are available as spare parts reinforced tube-in-tube construction with high quality powder coating idealy combined with our handle protection, engine guard and rear protection bar

£207.27*

Center Stand for Honda CB 500 X (2013-2016)

Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info

£216.37*

Front protection bar - anthracite for Honda CB 500 X (2013-2016)

£207.70*

Modelspecific rear enlargement for Honda CB 500 X (2013-2016)

Stable HEPCO&BECKER aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

£202.93*

Rear rack anthracite for Honda CB 500 X (2013-2016)

The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructionsOnly suitable for models with a universal plate when mounting the top case.

£216.80*

Smartrack soft luggage rear rack for Honda CB 500 X (2013-2016)

The slim, light and inconspicuous luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorcycle. A backpack or bag can be lashed through side slits. A backpack or bag can be secured using the side slots. Our rear bags with the Basic System can also be easily attached using an exchangeable module.suitable for rear bags with Basic fastening adapteradaptableincl. mounting kit and manualan ABE or registration is not necessaryhigh-quality powder coatingsolid construction

£189.05*