BMW G 650 GS Accessories

Engine protection: crash bar for BMW G 650 GS from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your BMW G 650 GS and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2011-2016Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for BMW G 650 GS leftEngine guard for BMW G 650 GS right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Motorbike underride guard: engine protection plate for BMW G 650 GS (2011-2016), silver Even a pavement can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Our engine protection plates protect the manifold and the engine block from impacts and stone chipping, even with the heaviest ground contact. With our underride guard for G 650 GS, you not only upgrade your motorbike in terms of safety, but also automatically give it a certain off-road look. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminium, our Hepco&Becker engine protection plate lets enough air through for cooling thanks to its special shape and is naturally angled, so that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. It enhances the look of your motorbike and is guaranteed never to let you down Features & important details: Material: High-strength aluminium, made in Germany Surface finish: Brushed, anodised Colour: Silver anodisedFor model year(s): 2011-2016Provides additional protection for sensitive parts on the manifold and engine block Scope of delivery: Engine protection plate for BMW G 650 GSMounting material / screw set Illustrated installation instructions (DE / EN) Important notes: No ABE or registration is required for this product if fitted as intended Please observe the fitting instructions and model-specific information to determine whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.

Our Hepco&Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look.adapted to the design of the motorbikeeffective protectionno reflections or danger from glaresimple mounting on mostly existing screw pointssolid construction made from German steelrobust and high-quality coatingmade in Germany without TÜV

A black centre stand for the BMW G 650 GS (2011-2016) - stability, sturdiness and easy handling all in one. The main stands from HEPCO&BECKER generally do not impair the lean angle clearance and are extremely robust. Thanks to their sophisticated geometry and a non-slip tread surface, the motorbike can be parked safely and effortlessly in any situation. These precision-manufactured stands are extremely stable, sandblasted, primed and powder-coated black, making them weather-resistant and durable. Main stands make maintenance work easier and provide a secure stand, especially when refuelling. In winter, they also reduce the load on the suspension elements and the rear wheel. The scope of delivery includes an ABE (general operating licence), which normally does not restrict the lean angle clearance. The high-quality surface finish emphasises the quality of this accessory. You will receive the centre stand, mounting material and instructions. Please follow the enclosed fitting instructions for optimum installation. A useful tool (article number: 700030) for attaching the tension spring is also available.

C-Bow side bag holder for BMW G 650 GS (2011-2016)/Sertao (2012-2016)/F 650 GS/Dakar (-2007) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration

Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.