Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Hepco&Becker's black tank protection bars for the Triumph Tiger 900 / Rally / GT / PRO (from 2020 to 2023) are more than just protection; they're a statement of individuality and strength for your motorcycle. These bars precisely follow the contours of your bike, giving it a characterful look. They're not just stylish but also a lifesaver in case of a fall or unexpected ground contact. They shield your motorcycle and you from major damages, offering optimal protection. The high-quality material optimally absorbs impact forces. It's recommended to replace the bars after a fall, as invisible damages could compromise their protective function. Don't worry, individual parts or sides can be easily ordered via email from us. These bars provide reliable protection for the tank, side fairings, and the front. Their high-quality coating ensures longevity and makes them extremely useful when securing your motorcycle. Made in Germany, they signify stable quality and precise craftsmanship. Please note that these motor protection bars don't require ABE certification and don't need to be registered. You'll find detailed instructions for installation in the attached manual.

The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.special carrier only for Hepco&Becker C-Bow bags and boxesnormal Hepco&Becker hard luggage does not fitKrauser K-Wing hard luggage does not fiteasy mountingdelivery: right side, left side, mounting kit, manualrecommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info)can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info)rear rack enlargements can possibly restrict the function of the bags

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

Outstanding fit - every HEPCO&BECKER Lock-it sidec carrier is precisely tuned to the particular type of motorcycle. This results in a very high precision on the motorcycle. Made of steel tube and custom-made laser parts, which are reinforced once more in highly stressed areas. The quality of Lock-it side carriers has already been confirmed several times in trade magazines.The carriers can be installed and removed within seconds. To do this you just have to loosen the lock-it screws with a quarter turn and you can remove the side parts backwards or sideways. As an anti-theft device you can optionally protect the carrier with our Lock-it screws against thefts (item number: 151050).All cases are closed by means of a quick release fastener on the carrier. For this you need the aluminum adapters (item number 700114) which are usually within delivery of the sidecases. The aluminum adapters are screwed to the rear right and left of the carrier and then offer an attachment option for the locks of the suitcase.For all Hepco & Becker side cases / hard cases / Aluminium boxessolid constructionFast detachable, remaining only unobtrusive small tabs on the motorcycleHigh quality surface finishsimple assembly, please refer to the enclosed mounting instructionsScope of delivery: right + left incl. Installation material and assembly instructionsPlease refer to the vehicle specific instructions or the assembly instructionsRecommended load: 10kg per side case

A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

Ideal for extreme terrain: the tank guard Solid, which stands out due to its 5-point connection to the motorcycle frame and additional stiffening plates at the lower node. The 2-fold front joining and bolting of the tube-halves leads to an optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The bracket can be combined with the original skid plate. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain. protection during pushovers or falls helps to tying up the motorcycle premium surface finish easy assembly delivery: right side, left side, mounting kit and manual high quality german steel tube please check manual or bike specific note for more info

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Stable HEPCO&BECKER aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

Ideal for extreme terrain: the tank guard Solid, which stands out due to its 5-point connection to the motorcycle frame and additional stiffening plates at the lower node. The 2-fold front joining and bolting of the tube-halves leads to an optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The bracket can be combined with the original skid plate. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain. protection during pushovers or falls helps to tying up the motorcycle premium surface finish easy assembly delivery: right side, left side, mounting kit and manual high quality german steel tube please check manual or bike specific note for more info

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

Hepco&Becker's white tank protection bars for the Triumph Tiger 900 / Rally / GT / PRO (from 2020 to 2023) aren't just an added protection; they also give your motorcycle a distinctive flair. These bars precisely trace the lines of your bike, giving it that individual appeal. They're not just stylish but also your savior in case of a fall or unwanted ground contact. They shield your motorcycle and you from major damages, offering optimal protection. The high-quality material optimally absorbs impact forces. It's advisable to replace the bars after a fall, as invisible damages could compromise their protective function. Don't worry, individual parts or sides can be easily ordered via email from us. These bars provide reliable protection for the tank, side fairings, and the front. Their high-quality coating ensures longevity and makes them extremely useful when securing your motorcycle. Made in Germany, they signify stable quality and precise craftsmanship. Please note that these motor protection bars don't require ABE certification and don't need to be registered. You'll find detailed instructions for installation in the attached manual

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Hepco&Becker's stainless steel tank protection bars for the Triumph Tiger 900 / Rally / GT / PRO (from 2020 to 2023) aren't just a shield; they're an enhancement for your motorcycle. These bars follow your bike's contours precisely, giving it that personalized touch. They're not just stylish but also your safety net in case of a fall or unwanted ground contact. They safeguard your motorcycle and you from major damages, offering optimal protection. The high-quality material absorbs impact forces exceptionally well. It's advisable to replace the bars after a fall, as invisible damages could compromise their protective function. Don't worry, individual parts or sides can be easily ordered via email from us. These bars provide reliable protection for the tank, side fairings, and the front. Their high-quality coating ensures longevity and makes them extremely useful when securing your motorcycle. Made in Germany, they signify stable quality and precise craftsmanship. Please note that these motor protection bars don't require ABE certification and don't need to be registered. You'll find detailed instructions for installation in the attached manual.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The Hepco&Becker Alurack is especially designed for our top cases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker top cases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the top case (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker top caseAttention: Hepco&Becker top case with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker top cases with a metal look on the bottomcan mostly be combined with C-Bow side carrier or normal hard lugagge side carrier: Please check manual or bike specific infoDifference to the Easyrack top case carrier: the bow which stands upwards for the top casemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350

Ideal for extreme terrain: the tank guard Solid, which stands out due to its 5-point connection to the motorcycle frame and additional stiffening plates at the lower node. The 2-fold front joining and bolting of the tube-halves leads to an optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The bracket can be combined with the original skid plate. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain. protection during pushovers or falls helps to tying up the motorcycle premium surface finish easy assembly delivery: right side, left side, mounting kit and manual high quality german steel tube please check manual or bike specific note for more info

A black main stand designed for the Triumph Tiger 900 / Rally / PRO (2020-2023) – sturdy, stable, and easy to operate. HEPCO&BECKER's main stands are known for their minimal restriction of lean angle freedom during rides while being extremely robust. Thanks to their refined geometry and non-slip surface, parking the motorcycle securely becomes effortless in any situation. These precisely crafted stands are exceptionally stable, sandblasted, primed, and finished with a black powder coating, making them weather-resistant and durable. They not only simplify maintenance tasks but also ensure a secure stance, especially during refueling or in other scenarios. During winter storage, they relieve stress from suspension components and the rear wheel, contributing to the motorcycle's extended lifespan. Included in the package is a General Operating Permit (ABE), and in most cases, the stand does not limit lean angle freedom. The high-quality surface finish gives it an appealing appearance. The package contains the main stand, mounting material, and a detailed instruction manual for easy installation. Please refer to the enclosed assembly instructions for a smooth setup. The helpful tool recommended for attaching the tension spring is item number 700030.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.