The black engine protection bars by Hepco&Becker for the BMW F 650 GS Twin (2008-2011)/F 700 GS (2012-2017) are always the ideal choice, regardless of whether you're primarily in off-road conditions, on the road, or in urban areas. A crash bar from Hepco&Becker ensures effective protection for your motorcycle against unforeseen events at all times.
Not only that: In the event of a fall or unintended ground contact, these protective bars safeguard your motorcycle and you as the rider from major damages. They precisely follow your motorcycle's lines, giving it a distinctive character. Crafted from an extremely durable tube-in-tube construction, newer models may come with integrated crash pads.
Depending on the specific motorcycle model, there are various surface finishes to choose from. These bars protect against falls and accidents, aid in securing the motorcycle, and feature a high-quality metal coating. Manufactured in Germany at our facility in Pirmasens, they come with a comprehensive and easily understandable installation guide, along with complete mounting materials for the right and left sides.
Please refer to any restrictions or instructions specific to your vehicle in the provided installation manual or vehicle-specific information. No ABE (General Operating Permit) or registration is required.
We offer special conditions for official driving schools. Please contact our customer service at Tel: (+49) 0 6331 / 1453 - 222.
The Hepco&Becker Lock-it side case carrier in black is designed for the BMW G 650 X Challenge (2007-2010) / Country (2007) / Moto (2007-2010). These side case carriers are characterized by their robust construction made of German steel tubing and custom laser-cut parts, which are reinforced at heavily stressed points.
The carriers are highly user-friendly and can be attached and removed in seconds. All that is required is to loosen the attached Lock-it screws by a quarter turn, and the side parts can be removed to the rear or to the side. For additional theft protection, the carriers can be optionally equipped with lockable Lock-it screws.
The attachment of the cases is done using a locking latch on the case itself to secure it to the carrier. Normally, the lock adapters included with the cases are needed for this. These lock adapters are screwed onto the carrier on the right and left sides and provide a mounting option for the case locks.
These side case carriers are known for their sturdy construction and are made in Germany. They are quickly detachable, leaving only inconspicuous small tabs on the motorcycle after removal. The high-quality surface finish ensures an appealing appearance.
In general, the installation is straightforward, and an installation manual is included. However, please refer to the vehicle-specific instructions and the installation manual for any restrictions.
These carriers are suitable for most Hepco&Becker hard-shell side cases, but please note the model-specific guidelines.
The delivery includes the right and left sides of the carriers, the required mounting materials, and an installation manual.
In general, luggage systems of this type do not require a General Operating Permit (ABE) or registration.
The tube diameter of the carriers is 16 mm.
The black tube luggage rack top case carrier by Hepco&Becker is specifically designed for the BMW G 650 X Challenge (2007-2010) / Country (2007) / Moto (2007-2010). These proven luggage racks allow the installation of high-quality Hepco&Becker top cases.
The design of the Hepco&Becker luggage racks is such that they are specifically suitable for most Hepco&Becker top cases. However, they also provide the option to mount older Hepco&Becker models, as the basic attachment has not changed.
Please note that these luggage racks are not suitable for the Hepco&Becker Orbit top case and top cases with a universal plate.
The carriers are model-specifically manufactured and only fit the listed motorcycle according to the installation instructions. They are made of German quality steel, ensuring maximum strength and safety. The high-quality coating provides long-lasting protection and an appealing appearance.
This tube luggage rack offers various options for securing luggage, including soft luggage. If additional space is needed, the bridge can also be combined with the Hepco&Becker universal luggage rack extension.
The recommended load capacity is 5 kg, although you should consider the model-specific instructions of the carrier as well as the motorcycle manufacturer's specifications. Heavy loads should generally not be transported in the top case but in the side cases or a tank bag.
These luggage racks can usually be combined with side case carriers or C-Bow holders without any issues. Please refer to the installation instructions for more information.
The delivery scope of this product includes the required mounting materials and a detailed manual. The luggage carriers are MADE IN GERMANY.
The top case is mounted on the tube luggage rack by sliding it out and then locking it with a metal locking latch on the carrier.
In general, luggage carriers of this kind do not require a General Operating Permit (ABE) or registration.
A black main stand for the BMW G 650 X Challenge (2007-2010) – steadfastness, stability, and easy handling all in one. HEPCO&BECKER's main stands typically do not compromise lean angles and are extremely robust. Thanks to their thoughtful geometry and a non-slip surface, parking the motorcycle securely is effortless in any situation.
These precisely crafted stands are highly stable, sandblasted, primed, and black powder-coated, making them weather-resistant and durable. Main stands simplify maintenance tasks and provide a stable support, especially during refueling. In winter, they also relieve strain on spring elements and the rear wheel.
Included is an ABE (General Operating Permit), usually not limiting the lean angle. The high-quality surface finish emphasizes the quality of this accessory. You'll receive the main stand, mounting materials, and instructions. Please refer to the provided installation guide for optimal setup. Please take note of the attached assembly instructions for optimal installation. A helpful tool (item number: 700030) for attaching the tension spring is also available.
WE ARE TAKING A SHORT BREAK FROM OCTOBER 2ND TO 3RD AND WILL BE BACK FOR YOU FROM OCTOBER 4TH!
You can order continuously via our shop!
Your orders will be processed immediately on October 4th!
Thanks for your understanding!
WIR MACHEN VOM 2. BIS 3. OKTOBER EINE KURZE PAUSE UND SIND AB DEM 4. OKTOBER WIEDER FÜR DICH DA!
Du kannst ununterbrochen über unseren Shop bestellen!
Deine Bestellungen werden umgehend am 4. Oktober bearbeitet!
Danke für dein Verständnis!