The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.special carrier only for Hepco&Becker C-Bow bags and boxesnormal Hepco&Becker hard luggage does not fitKrauser K-Wing hard luggage does not fiteasy mountingdelivery: right side, left side, mounting kit, manualrecommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info)can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info)rear rack enlargements can possibly restrict the function of the bags

The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructionsOnly suitable for models with a universal plate when mounting the top case.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

high-quality surface coatingeasy constructionincluding mounting materialStable construction made of steel MADE IN GERMANYdoes not require any ABE or entry in the papers ​

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The black front guard for the Triumph Trident 660 (2021-) offers reliable protection. Specifically designed for low speeds, it ensures good defense against falls and accidents. It effectively protects not only turn signals, clutch and brake levers, exhaust mufflers, and bodywork parts but also other crucial components. The high-quality powder coating not only enhances its appearance but also guarantees durability. The mounting materials required for installation are included. We offer special conditions for driving schools. Please contact our representatives at Tel: 06331/1453-222 to learn more.

The black rear protection bar for the Triumph Trident 660 (2021-) offers not only a stylish upgrade but also provides reliable protection during slow-speed falls and accidents. These protection bars safeguard not only indicators, clutch and brake levers, and exhaust pipes but also preserve fairing parts and more. The high-quality powder coating ensures durability and adds an attractive appearance. The mounting hardware is included for straightforward installation. We have special offers for driving schools as we understand the importance of protection and safety during intensive usage. Please contact our representatives to benefit from these special terms. You can reach us at Tel: 06331/1453-222.

The HEPCO&BECKER Minirack is developed for small luggage items. The solid carrier guarantees a loading of 3-5kg (depends on model) and is perfect for small bags such as travel bags or our rearbag Street 640806 00 01 solid steel tube carrier high quality aluminium plate easy mounting incl. mounting kit and manual high quality surface finish recommended load: 3-5 kg (please check manual or bike specific info) the Minirack system is also mentioned in our Topcasecarrier video:

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look. solid aluminium skid plate MADE IN GERMANY incl. manual 3-4mm thick aluminium plate bike specific development precisely manufactured, adapted to fit the engine and exhaust system of each specific bike please also check manual or bike specific info, if you want to know compatibility with original or other accessories

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look. solid aluminium skid plate MADE IN GERMANY incl. manual 3-4mm thick aluminium plate bike specific development precisely manufactured, adapted to fit the engine and exhaust system of each specific bike please also check manual or bike specific info, if you want to know compatibility with original or other accessories

The Hepco&Becker Alurack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Easyrack topcasecarrier: the bow which stands upwards for the topcasemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu Topcase Standard 35, you need a special bow adapter: 700007351 or 700007350

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.