TRIUMPH Thunderbird Accessories
Here you will find all model-specific products available and accessories for TRIUMPH Thunderbird
- Our crash bars for Thunderbird – protecting both your motorcycle and yourself
- The universal tank bag Epic 11 Belt
- The model-specific rear rack for TRIUMPH Thunderbird
You will also find the corresponding luggage items with the respective carriers in the accessories section.
LED auxiliary headlights Nova (set) incl. Ø18-25mm universal mounting set, wiring harness and switch
Let there be light! Motorbike auxiliary headlights LED NOVA With the Nova LED auxiliary headlight set from HEPCO&BECKER, you get everything you need to improve the visibility and safety of your motorbike. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorbike an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorbike by using the HEPCO&BECKER LED motorbike auxiliary headlight set Nova. The brand new LED auxiliary headlight Nova - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight of course ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67Headlights can be added flexibly via the switch on the handlebarsPlease note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit . In older vehicles, this can be achieved by briefly increasing the speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when falls below this voltage limit do the lights switch off automatically via the control unit. When switching on again (wait for the dwell time of the control unit), the voltage limit of 13.1 V is queried again. Download FAQ as PDF
Chrome engine guard for Triumph Thunderbird (1995-1998)
Engine protection: crash bars for Triumph Thunderbird from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Triumph Thunderbird and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: high-gloss chrome plating.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: Elegant, high-gloss chromeColour: Chrome, high-gloss silverFor model year(s): 1995-1998Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Triumph Thunderbird leftEngine guard for Triumph Thunderbird right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated fitting instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Epic 11 Belt tank bag
Universal fit thanks to flexible belt fastening. For models for which we cannot offer a model-specific tank ring for technical reasons.Dimensionally stable thanks to high-density EVA foams, tear-resistant Hypalon and 840D ballistic polyester. Lockable zips Robust carrying handle Water-repellent outer material Additional compartments with mesh pocket inside the lid Small reflective details for better visibility in road traffic Removable, waterproof inner bag with roll-top fastening - easy removal with press stud fasteningVolume expansion through all-round zipLoops on the tank bag for attaching optional, customised accessories such as the Hepco&Becker map/smartphone bag
Complete carrier set (side case carrier and tubular luggage rack top case carrier) chrome for Triumph Legend TT (1999-2001)/Thunderbird (1999-2003)
The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free
Tubular luggage rack Topcaseträger chrome for Triumph Legend TT (1999-2001)/Thunderbird (1999-2003)
Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration
Matching Universal-Products
Our novelty for individual design: The Drybrid BagFeatures of the Drybrid:Wide opening with roll-top closure and plastic clips on the sidesTwo circumferential compression strapsWaterproofSuitable for many motorcycles due to lashing with 4 loop strapsCan be mounted on pillion seat and wideningUV resistantEasy to cleanEasy to compress due to side air valveWith practical carrying handleShoulder strap available as an optionDetails of the DrybridMaterial: PVC coated polyesterColor: gray-black / reflex External dimensions 30L: 26 x 34 x 45cm Weight: 0.9kg Packing volume: 30 litersIncludes loop straps for universal use 4 point attachment
Our novelty for individual design: The Drybrid BagFeatures of the Drybrid:Wide opening with roll-top closure and plastic clips on the sidesTwo circumferential compression strapsWaterproofSuitable for many motorcycles due to lashing with 4 loop strapsCan be mounted on pillion seat and wideningUV resistantEasy to cleanEasy to compress due to side air valveWith practical carrying handleShoulder strap available as an optionDetails of the DrybridMaterial: PVC coated polyester Color: gray-black / reflex External dimensions: 32 x 32 x 52cm Weight: 1.0kg Packing volume: 50 litersIncludes loop straps for universal use 4 point attachment
Hepco&Becker Royster Rearbag incl. Seatpad Basic The seatpad is attached to the pillion seat or pillion bench using straps. The Basic counterholder is screwed to the base of the rear bag, allowing the rear bag to be simply clicked onto the Seatpad Basic and removed again quickly and easily. Scope of delivery: 1x rear bag, 1x Seatpad Basic, 1x Basic counterholder (locking unit)stable and secure hold thanks to rubber plate on the seat padRear bag is suitable for a helmet thanks to the extension zip Rear bag with waterproof inner bag, water-repellent outer materialnot suitable for off-road use
The Hepco&Becker Royster Rearbag Sport incl. Seatpad Basic The seat pad is attached to the pillion seat or pillion bench using straps. The Basic counterholder is screwed to the base of the rear bag, allowing the rear bag to be simply clicked onto the Seatpad Basic and removed again quickly and easily.Scope of delivery: 1x rear bag, 1x Seatpad Basic, 1x Basic counterholder (locking unit)stable and secure hold thanks to rubber plate on the seat padRear bag with waterproof inner bag, water-repellent outer materialRear bag with extension zipnot suitable for off-road use
Street rear bag incl. Seatpad BasicThe seat pad is attached to the pillion seat or pillion bench using straps. The Basic counterholder is screwed to the base of the rear bag, allowing the rear bag to be simply clicked onto the Seatpad Basic and removed again quickly and easily. Scope of delivery: 1x rear bag, 1x Seatpad Basic with straps, 1x Basic counterholder (locking unit) stable and secure hold thanks to rubber plate on the seat pad Rear bag with integrated rain cover, carrying handle, shoulder strap and rubber luggage net on the lid Rear bag has reinforced side walls to retain its shape, sturdy EVA base shell, 2-way zip, lockable with small padlock and all-round zip to increase volumenot suitable for off-road use
Universal fit for almost all motorbikesBelt set included in the scope of deliveryReliable 4-point tensioning strap fastening2 outer pockets with zipsZipped mesh compartment in the lid Covered zips Underside made of non-slip material Water-repellent outer material with inner coating Reflective details for better visibility Waterproof inner pocket with roll-top closure Robust carry handle G-Hook fastening elements made from anodised aluminium High-strength bartack seams Hypalon zip for better grip