Our high-quality C-Bow side carriers in matte black are specifically designed for the Ducati Hypermotard 796, Hypermotard 1100 Evo, and Hypermotard 1100 SP (model years 2007-2012). These sturdy carriers allow for the attachment of Hepco&Becker C-Bow side bags and cases and are characterized by their excellent surface finish. Please note that conventional Hepco&Becker hard cases like the Junior or Journey are not compatible with this carrier. Similarly, Krauser K-Wing cases do not fit on the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Make sure to follow the installation instructions, consider model-specific guidelines, and check the manufacturer's specifications for any restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. Please follow the installation instructions or model-specific guidelines for the respective carrier. However, keep in mind that luggage rack extensions can affect the attachment of bags to the carrier. This luggage carrier does not require a General Operating Permit (ABE), and it does not need to be registered in the vehicle documents. Please be aware that this carrier was specifically designed for the stock condition of the motorcycle and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags always have an adequate distance from the exhaust, and the turn signals maintain an adequate beam angle. The exhaust stream must not be directed at the bags.

The Hepco&Becker Minirack is the ideal slim, lightweight, and discreet solution for securing soft luggage on the rear of your Ducati Hypermotard 796/1100 Evo/SP (2007-2012). This Minirack provides the opportunity to securely fasten backpacks or bags to the motorcycle's rear using side slots. The recommended load capacity is 3-5 kg. Please note the vehicle-specific instructions provided in the installation manual, as well as the manufacturer's recommendations. Please be aware that the Minirack is not suitable for mounting a top case. No general operating permit (ABE) or registration is required for this Minirack. It features a high-quality powder coating and is a sturdy construction made in Germany.