SMALL SPORT STAR RACK BMW R 1200 GS/LC especially designed for the original rack BMW R1200 GS and LC Item-no. 640003 00 00  SPORT STAR The universal rear bag The alternative to a tank bag. The Sport Star looks great and needs no additional handles or holders. Depending on the model, it is fastened with straps to the seat or to a rear rack.With a zipper and compression straps, its capacity can vary, depen- ding on the version. 

A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

set of sidecarrier right/left made out of stainless steel in combination with special Xplorer Cutout boxes Features Xplorer Cutout: recessed 37 ltr. Suitcase on the muffler side 40 ltr. Case on the other side high-impact plastic and anodized aluminum sheets in the composite incl. keys and cylinders absolutely watertight wide range of accessories available Delivery: Left / Right + locks and keys Features sidecarrier stainless steel:  Adventure-compatible, weather resistant and firmly bolted sidecarrier made out of stainless steel blasted and electro-polished surface finish through the opening, the width is reduced significantly to only about one meter Delivery: Left / Right + Mounting material + manual Cutout case Xplorer 37 silver or blackWeight: 4.6 kgContent 37 literDimensions WxHxD: 48 x 38 x 22/29 cmLoading capacity: 10 kg per box Cutout case Xplorer 40 silver or blackWeight: 4.9 kgCapacity 40 litersDimensions WxHxD: 48 x 38 x 29 cmLoading capacity: 10 kg per suitcase- Amended retaining lock position (Cutout-sidecarrier is not suitable for normal Xplorer suitcase with Item No .: 610209/610208/610214/610213/610211/610210/610216/610215)

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

set of sidecarrier right/left made out of stainless steel in combination with special Xplorer Cutout boxes Features Xplorer Cutout: recessed 37 ltr. Suitcase on the muffler side 40 ltr. Case on the other side high-impact plastic and anodized aluminum sheets in the composite incl. keys and cylinders absolutely watertight wide range of accessories available Delivery: Left / Right + locks and keys Features sidecarrier stainless steel:  Adventure-compatible, weather resistant and firmly bolted sidecarrier made out of stainless steel blasted and electro-polished surface finish through the opening, the width is reduced significantly to only about one meter Delivery: Left / Right + Mounting material + manual Cutout case Xplorer 37 silver or black powder coatedWeight: 4.6 kgContent 37 literDimensions WxHxD: 48 x 38 x 22/29 cmLoading capacity: 10 kg per box Cutout case Xplorer 40 silver or black powder coatedWeight: 4.9 kgCapacity 40 litersDimensions WxHxD: 48 x 38 x 29 cmLoading capacity: 10 kg per suitcase- Amended retaining lock position (Cutout-sidecarrier is not suitable for normal Xplorer suitcase with Item No .: 610209/610208/610214/610213/610211/610210/610216/610215)

Outstanding fit - every HEPCO&BECKER Lock-it sidec carrier is precisely tuned to the particular type of motorcycle. This results in a very high precision on the motorcycle. Made of steel tube and custom-made laser parts, which are reinforced once more in highly stressed areas. The quality of Lock-it side carriers has already been confirmed several times in trade magazines.The carriers can be installed and removed within seconds. To do this you just have to loosen the lock-it screws with a quarter turn and you can remove the side parts backwards or sideways. As an anti-theft device you can optionally protect the carrier with our Lock-it screws against thefts (item number: 151050).All cases are closed by means of a quick release fastener on the carrier. For this you need the aluminum adapters (item number 700114) which are usually within delivery of the sidecases. The aluminum adapters are screwed to the rear right and left of the carrier and then offer an attachment option for the locks of the suitcase.For all Hepco & Becker side cases / hard cases / Aluminium boxessolid constructionFast detachable, remaining only unobtrusive small tabs on the motorcycleHigh quality surface finishsimple assembly, please refer to the enclosed mounting instructionsScope of delivery: right + left incl. Installation material and assembly instructionsPlease refer to the vehicle specific instructions or the assembly instructionsRecommended load: 10kg per side case

Outstanding fit - every HEPCO&BECKER Lock-it sidec carrier is precisely tuned to the particular type of motorcycle. This results in a very high precision on the motorcycle. Made of steel tube and custom-made laser parts, which are reinforced once more in highly stressed areas. The quality of Lock-it side carriers has already been confirmed several times in trade magazines.The carriers can be installed and removed within seconds. To do this you just have to loosen the lock-it screws with a quarter turn and you can remove the side parts backwards or sideways. As an anti-theft device you can optionally protect the carrier with our Lock-it screws against thefts (item number: 151050).All cases are closed by means of a quick release fastener on the carrier. For this you need the aluminum adapters (item number 700114) which are usually within delivery of the sidecases. The aluminum adapters are screwed to the rear right and left of the carrier and then offer an attachment option for the locks of the suitcase.For all Hepco & Becker side cases / hard cases / Aluminium boxessolid constructionFast detachable, remaining only unobtrusive small tabs on the motorcycleHigh quality surface finishsimple assembly, please refer to the enclosed mounting instructionsScope of delivery: right + left incl. Installation material and assembly instructionsPlease refer to the vehicle specific instructions or the assembly instructionsRecommended load: 10kg per side case

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Features carrier: Adventure-proof, weather-resistant and firmly screwed side case carrier made of stainless steel sandblasted and electropolished surface finish Scope of delivery: left + right + mounting material + instructions for attaching Xplorer cases 37 and 40 in the cutout variant