Complete Carrier Sets

Our Complete Carrier Sets offer a comprehensive solution for mounting luggage systems on your motorcycle. These sets include all the necessary components to securely install luggage racks, case mounts, and other accessories. They are model-specific, designed to ensure a perfect fit and easy installation on your motorcycle. With our Complete Carrier Sets, you can transport your luggage safely and conveniently, whether it's for short rides or longer adventures.

Lock adapter for sidecases to side carrier (1 pc)

This aluminum adapter is used to hold the case lock on hard-shell and aluminum cases from Hepco & Becker. The screws are included in the mounting kit for the pannier rack. If these screws are no longer available, please contact us in advance. You can take a look at the installation instructions provided with the product beforehand so that you also know which screws you need. Caution: Spacer plates are also required for the side cases Alu Standard and Alu Exclusiv. The following kit is required for this: 710081

£16.74*

Thread locking medium strength MARSTON 10g

Manufacturer: Marston-Domsel GmbH Factory No .: MSS.585.F10-BK highly viscous · medium strength · removable · for all threaded metal connections · prevents breakage due to vibration, e.g. on gearboxes, motors, etc. · slightly oil-tolerant · connection can be released with normal tools · DVGW release · NSF P1 registered (Reg. No. 154175) · max. Thread: M36 · gap filling capacity: 0.25 mm · breakaway torque: 17-22 Nm · temperature resistance from -55 ° C to +150 ° C ·Additional technical characteristics Gap bridging max .: 0.25mm · Color: dark blue · Breakaway torque: 17-22Nm · Certification: NSF P1, DVGW Brand: MARSTONContent: 10 gThread: max. M36Strength class: mediumTemperature: -55 to +150 ° CViscosity: highly viscousPackaging: Bottle

£5.02*

Lock adapter including adapter for side case carrier for Alu side case Standard/Exclusiv (piece)

Replacement lock adapter including angled plate for Hepco&Becker Aluminum CasesNecessary for proper insertion of the locking mechanism into the carrier Typically included with the case, but serves as a replacement part

£37.67*

Toolbox for side carrier Cutout, Lock-it and permanent mounted universal kit

Inside dimensions: 29x8 cm (length / diameter) Dimensions: 32x9 cm Volume: 1.5 liters it is model-specific mounted on the inside of a side luggage carrier to utilize this space model-specific mounting kit waterproof screw cap perfect for driving tools, safety vests or similar matters.

£53.56*

Paint repair set black matt

for repairing minor paint damage on powder-coated surfacesscope of delivery: 1x brush bottle with the corresponding shadepre-treatment: the surface must be clean, free of rust and grease. Sanding of the surface may be necessary.properties after drying: After the drying time, the color corresponds approximately to the original powder coating color. The degree of gloss underlies small fluctuations. Larger effect deviations must be expected with metallic shades.

£17.58*

Universal heat protection plate for Hepco & Becker side carrier

high quality stainless steel heat shield for mounting on the Hepco & Becker side carrierfits only on models where a connection bracket is mounted, as shown in the picture

£31.80*

Paint repair set anthracite

£17.58*

wall holder Side carrier for right sided cases

Practical wall bracket to "store" your own Hepco&Becker luggage (Junior, Journey, Gobi, Xplorer and Xceed) on the wall.Not suitable for Xplorer Cutout sidecases!

£51.89*

Paint repair set silver

£17.58*