With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova.
High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 22 watts
ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation)
Improved traffic light conditions
Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging
Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set
Connection is only via the battery, no connection to the vehicle wiring harness is required
No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebars
Ideal for extreme terrain: the engine protection bar Solid, which stands out due to its 3-point connection to the motorcycle frame and additional stiffening plates at the lower node. Optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain.
protection during pushovers or falls
helps to tying up the motorcycle
premium surface finish
easy assembly
delivery: right side, left side, mounting kit and manual
high quality german steel tube
please check manual or bike specific note for more info
Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities.
for universal mounting to engine guards and tank guards
high stability
very low weight
abrasion-resistant coating
water-repellent and incl. smaller waterproof bag on the inside
lockable 2-way zipper
Recommended max. speed 130km / h
A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
Inside dimensions: 29x8 cm (length / diameter)
Dimensions: 32x9 cm
Volume: 1.5 liters
it is model-specific mounted on the inside of a side luggage carrier to utilize this space
model-specific mounting kit
waterproof screw cap
perfect for driving tools, safety vests or similar matters.
solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps
please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info