SUZUKI VS 1400 Intruder Accessories

The Hepco&Becker Twinlights, with 2x55 watt light output, guarantee an impressive appearance. They are not only an attractive addition, but also offer added safety. Naturally TÜV-free and with type approval.are switched on instead of the normal high beamwhen the high beam is on, a maximum of two headlights may be lit on the motorbikesimple installationScope of delivery: headlight set, model-specific bracket and mounting materialincl. ABEincl. bulb (halogen bulb H3 with flat plug connection, 55 watts)

Engine protection: crash bar for Suzuki VS 1400 Intruder from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Suzuki VS 1400 Intruder and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional contact with the ground, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: high-gloss chrome plating.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: Elegant, high-gloss chromeColour: Chrome, high-gloss silverFor model year(s): 1987-2003Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Suzuki VS 1400 Intruder leftEngine guard for Suzuki VS 1400 Intruder right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Thanks to the comfortable back cushion, the pillion passenger can travel more relaxed and is given a feeling of safety.high-quality surface finishcan usually be combined with the corresponding C-Bow holders, leather bag holders or pannier racks without any problems (please note the vehicle-specific information and the installation instructions)Luggage systems generally do not require an ABE or registration

A Hepco&Becker sissy bar with luggage rack makes it easy to carry small items of luggage. An optional aluminium luggage rack extension (item number 800000) ensures secure attachment of our handbags or other wide items of luggage.not suitable for topcases!high-quality surface finishRecommended payload: 5kg (please observe the installation instructions provided, as well as vehicle-specific information or the motorbike manufacturer's specifications)can usually be combined with the corresponding C-Bow holders, leather bag holders or pannier racks without any problems (please note the vehicle-specific information and the installation instructions for restrictions)incl. installation material and installation instructionsLuggage systems generally do not require an ABE or registration

MADE IN GERMANYScope of delivery: right + left incl. mounting material and instructionsfor many Hepco&Becker leather bagsMounting of the bags either via quick-release fastener, or by fixed mountingin the case of fixed mounting, the leather bags are then firmly screwed to the carrier, a fixed mounting kit is automatically included with the leather bagwith the quick-release fastener solution, the leather panniers must be adapted to the specific model, as each model-specific leather pannier holder is shaped differentlyWe recommend proper and professional assembly by our saddlers at our factoryQuick-release fastener factory assembly item number: 700402Quick release self-assembly item number: 700403Recommended payload: 5-7kg per case (Please note the model-specific information on the respective carrier and the motorbike manufacturer-specific information)If you want to buy a new carrier for a different motorbike and you still have old leather bags with a fastening system from the old carrier, these bags will most likely not fit the new carrier, as each carrier is individually shaped and model-specific.However, we can also remedy this situation. Send us the leather bags with an accompanying letter before ordering. We will then send you a quotation. We can then replace the rear panels of the Hepco&Becker leather bags and fit new ones; model-specific quick-release fastener included. Note:Leather bags in the C-Bow version do not fitHepco&Becker side cases or aluminium cases do not fit

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended payload: approx. 5kg (Please observe the model-specific information on the respective carrier as well as the motorbike manufacturer-specific information) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration