With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 22 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebars

Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info

Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities. for universal mounting to engine guards and tank guards high stability very low weight abrasion-resistant coating water-repellent and incl. smaller waterproof bag on the inside lockable 2-way zipper Recommended max. speed 130km / h

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

Outstanding fit - every HEPCO&BECKER Lock-it sidec carrier is precisely tuned to the particular type of motorcycle. This results in a very high precision on the motorcycle. Made of steel tube and custom-made laser parts, which are reinforced once more in highly stressed areas. The quality of Lock-it side carriers has already been confirmed several times in trade magazines.The carriers can be installed and removed within seconds. To do this you just have to loosen the lock-it screws with a quarter turn and you can remove the side parts backwards or sideways. As an anti-theft device you can optionally protect the carrier with our Lock-it screws against thefts (item number: 151050).All cases are closed by means of a quick release fastener on the carrier. For this you need the aluminum adapters (item number 700114) which are usually within delivery of the sidecases. The aluminum adapters are screwed to the rear right and left of the carrier and then offer an attachment option for the locks of the suitcase.For all Hepco & Becker side cases / hard cases / Aluminium boxessolid constructionFast detachable, remaining only unobtrusive small tabs on the motorcycleHigh quality surface finishsimple assembly, please refer to the enclosed mounting instructionsScope of delivery: right + left incl. Installation material and assembly instructionsPlease refer to the vehicle specific instructions or the assembly instructionsRecommended load: 10kg per side case

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.special carrier only for Hepco&Becker C-Bow bags and boxesnormal Hepco&Becker hard luggage does not fitKrauser K-Wing hard luggage does not fiteasy mountingdelivery: right side, left side, mounting kit, manualrecommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info)can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info)rear rack enlargements can possibly restrict the function of the bags

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories