The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Elevate the versatility and style of your BMW F 800 S (2006-2011) or F 800 ST (2006-2012) with our C-Bow side carriers in sleek black. These robust side carriers have been specifically designed to securely transport our Hepco&Becker C-Bow side bags and cases. The high-quality surface finish not only bestows timeless elegance upon your motorcycle but also provides top-tier protection against environmental elements. These side carriers are tailor-made for use with our C-Bow bags and cases, ensuring a secure and stable attachment. Please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these side carriers. Similarly, Krauser K-Wing cases are not suitable for use with the C-Bow carrier. For optimal results, we recommend a maximum load capacity of 5 kg per bag or case, and please follow the assembly instructions, vehicle-specific guidelines, and the recommendations of the motorcycle manufacturer to avoid any limitations. In most cases, our C-Bow side carriers can be combined seamlessly with top case carriers, sissy bars, or solo racks. However, please pay attention to the assembly instructions and the vehicle-specific guidelines provided by the respective carrier, as luggage rack extensions may restrict the bag attachment to the carrier. Another advantage is that our luggage carriers do not require an ABE or registration in your motorcycle's documents. The package includes both the left and right side carriers, a comprehensive assembly manual, and the necessary mounting kit. Please be aware that these side carriers have been developed for use with the stock condition of your machine and have not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate beam angle to maintain safety while riding. The exhaust stream must not be directed towards the bags.

The silver Hepco&Becker tube luggage rack top case carrier has been specifically designed for your BMW F 800 ST (2006-2012). This tube luggage rack serves to attach Hepco&Becker top cases and is characterized by the highest quality. Hepco&Becker luggage racks are designed to be practically compatible with all our top cases. Not only new top cases fit, but older Hepco&Becker models can also be mounted since the basic attachment has not changed. Please note that the Hepco&Becker Orbit top case and top cases with a universal plate are not compatible. The carriers are custom-made for specific models and fit only on the motorcycle listed in the installation manual. Thanks to the use of high-quality German steel, Hepco&Becker luggage racks ensure maximum strength and safety. With a high-quality coating and proper maintenance, the appearance of the rack remains intact in the long run. If needed, soft luggage can also be easily attached, as the tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. The recommended load capacity is 5 kg. Please observe the model-specific instructions for the respective carrier and the manufacturer's specifications. Heavy cargo should generally not be transported in the top case but in the side cases or tank bag. This tube luggage rack can usually be combined without any issues with side case carriers or C-Bow holders. Please refer to the installation instructions for guidance. The delivery includes the required mounting materials and an instruction manual. Luggage racks typically do not require a General Operating Permit (ABE) or registration. The top case is pushed onto the tube luggage rack and secured to the carrier with a metal locking mechanism.

The Hepco&Becker Lock-it side case carrier in black has been specifically designed for your BMW F 800 ST (2006-2012). This side case carrier is made from German steel tubing and custom laser-cut parts that are additionally reinforced at highly stressed areas. What sets this carrier apart is its ease of installation and removal. The Lock-it screws, attached to the carrier, can be loosened with a quarter turn in a matter of seconds, allowing the side panels to be removed to the rear or to the side. For added theft protection, you can optionally use our lockable Lock-it screws. All cases are locked onto the carrier using a retaining lock located on the case itself. To do this, you will need the lock adapters, which are normally included with the case. These lock adapters are fastened to the right and left sides of the carrier, providing a mounting point for the case retention locks. This side case carrier features a sturdy construction made of German steel tubing and is manufactured in Germany. It can be quickly removed, leaving only inconspicuous small tabs on the motorcycle. The high-quality surface finish ensures an appealing appearance. Installation is generally straightforward; please refer to the included installation instructions for details. The delivery includes the right and left carrier, as well as the necessary mounting materials and installation instructions. Any restrictions can be found in the vehicle-specific instructions or the installation manual. These side case carriers are suitable for most Hepco&Becker hard-shell side cases (please note model-specific instructions). Luggage systems generally do not require a General Operating Permit (ABE) or registration. The tube diameter is 16 mm.

A black main stand for the BMW F 800 S (2006-2011) / F 800 ST (2006-2012) – steadfastness, stability, and easy handling all in one. HEPCO&BECKER's main stands typically do not compromise lean angles and are extremely robust. Thanks to their thoughtful geometry and a non-slip surface, parking the motorcycle securely is effortless in any situation. These precisely crafted stands are highly stable, sandblasted, primed, and black powder-coated, making them weather-resistant and durable. Main stands simplify maintenance tasks and provide a stable support, especially during refueling. In winter, they also relieve strain on spring elements and the rear wheel. Included is an ABE (General Operating Permit), usually not limiting the lean angle. The high-quality surface finish emphasizes the quality of this accessory. You'll receive the main stand, mounting materials, and instructions. Please refer to the provided installation guide for optimal setup. Please take note of the attached assembly instructions for optimal installation. A helpful tool (item number: 700030) for attaching the tension spring is also available.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.