BUELL Lightning XB 12 Accessories
Here you will find all model-specific products and accessories for BUELL Lightning XB 12
- The perfectly fitting, high-quality case carriers for Lightning XB 12
The respective luggage items can also be found with the corresponding carriers in the accessories section.
Side case carrier Lock-it black for BUELL Lightning XB 9 SX (2002-2003)/Lightning XB 12 (200
£329.55*
The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm
Side case carrier Lock-it black for BUELL Lightning XB 9 SX (2002-2003)/Lightning XB 12 (2009)
£329.55*
The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm