The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.special carrier only for Hepco&Becker C-Bow bags and boxesnormal Hepco&Becker hard luggage does not fitKrauser K-Wing hard luggage does not fiteasy mountingdelivery: right side, left side, mounting kit, manualrecommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info)can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info)rear rack enlargements can possibly restrict the function of the bags

The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructionsOnly suitable for models with a universal plate when mounting the top case.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

Main stand black for Moto Guzzi V7 Special/Stone/Centenario (850 cc) (2021-) - Stability, durability, and ease of use. HEPCO&BECKER's main stands usually do not restrict lean angles while riding and are extremely robust. Thanks to sophisticated geometry and a non-slip surface, parking the motorcycle securely is straightforward in any situation. The precisely crafted stands are highly stable, sandblasted, primed, and black powder-coated, making them weather-resistant and durable. Main stands simplify maintenance tasks and provide stable support, especially during refueling. In winter, they also relieve strain on spring elements and the rear wheel. The package includes a General Operating Permit (ABE), and typically, there's no restriction on lean angles. The high-quality surface finish emphasizes the quality of this accessory. You'll receive the main stand, mounting materials, and an instruction manual. Please refer to the provided assembly instructions for optimal installation. To simplify attaching the tension spring, we recommend our helpful tool with item number 700030.

A gleaming appearance with a luggage rack. This loos is distinctive to a chopper. Always comfotable on the road! All components are chromed (some models also available in black), polished to a high gloss, and perfectly adapted to the character of your bike.With the comfortable backrest, the passenger can relax and feel secure while riding. A HEPCO&BECKER Sissybar with a luggage rack makes it easier to carry small luggage. Optional: The aluminium rear rack enlargement for Handbags (ground and anodized, Item: 800000 00 09) ensures safe attachement.custom designed for each motorcyclesturdy, elegant designQuality German steel tubing with premium high-gloss surface finishprecise manufacturingeasy assemblyincl. assembly instruction and mounting kitcan mostly be combined with C-bow sidecarrier or normal hard luggage sidecarrier (please check manual or bike specific note for more info)recommended load on the rear rack: 5kg (please check manual or manufacturer of motorcycle for more info)

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.special carrier only for Hepco&Becker C-Bow bags and boxesnormal Hepco&Becker hard luggage does not fitKrauser K-Wing hard luggage does not fiteasy mountingdelivery: right side, left side, mounting kit, manualrecommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info)can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info)rear rack enlargements can possibly restrict the function of the bags

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

A gleaming appearance with a luggage rack. This loos is distinctive to a chopper. Always comfotable on the road! All components are chromed (some models also available in black), polished to a high gloss, and perfectly adapted to the character of your bike.With the comfortable backrest, the passenger can relax and feel secure while riding. A HEPCO&BECKER Sissybar with a luggage rack makes it easier to carry small luggage. Optional: The aluminium rear rack enlargement for Handbags (ground and anodized, Item: 800000 00 09) ensures safe attachement.custom designed for each motorcyclesturdy, elegant designQuality German steel tubing with premium high-gloss surface finishprecise manufacturingeasy assemblyincl. assembly instruction and mounting kitcan mostly be combined with C-bow sidecarrier or normal hard luggage sidecarrier (please check manual or bike specific note for more info)recommended load on the rear rack: 5kg (please check manual or manufacturer of motorcycle for more info)

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

Enhance the riding experience for your passenger on the Moto Guzzi V7 Special/Stone/Centenario from 2021 with the black Sissybar without luggage carrier! Thanks to the comfortable backrest, your passenger can travel relaxed and feel secure. The high-quality surface finish adds a premium look to your motorcycle. Typically, the Sissybar integrates seamlessly with specific C-Bow holders, leather bag holders, or luggage carriers (Please refer to the vehicle-specific details and installation instructions). And the best part: Luggage systems generally don't require ABE or registration!

The Hepco&Becker Twinlights, with 2x55W light output, guarantee an impressive appearance. They are not only a nice addition, but also offer an added safety feature. Of course, TÜV-free and with design approval.are switched on instead of the normal high beamWhen the high beam is on, a maximum of two headlights may be on on the motorcycleeasy constructionScope of delivery: headlight set, model-specific holder and mounting materialincluding ABEincluding bulbs

Enhance the riding experience for your passenger on the Moto Guzzi V7 Special/Stone/Centenario from 2021 with the black/brown Sissybar without luggage carrier! The comfortable backrest ensures relaxed travels and instills a sense of security. The high-quality surface finish adds a touch of elegance to your motorcycle. Typically, the Sissybar integrates smoothly with specific C-Bow holders, leather bag holders, or luggage carriers (Please refer to the vehicle-specific details and installation instructions). And the best part: Luggage systems generally don't require ABE or registration!