Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Our timeless classics saddlebag carriers are felled by a shapely design which perfectly adapts to the lines of the motorcycle. Signal lights usually remain in the original position. A sufficient safety distance of the leather bags to the hot exhaust and to the rear wheel is guaranteed. True to the saying: As close as possible, as far away as necessary. The carrier is constructed of seamless steel tube and has a high-quality high-gloss chromium plating (in some carriers also black powder-coated). Easy to attach the HEPCO&BECKER leather bags, usually without problems in combination with a Sissybar or a Solorack.Scope of delivery: right + left incl. Installation material and instructionsRecommended load: 10kg per side (Please refer to the assembly instructions, vehicle-specific instructions, or motorcycle manufacturers)For Hepco & Becker leather bagsInstallation of the bags either with quick release, or by fixed mountingFor a fixed mounting, the leather bags are then screwed tightly to the carrier, and a fixed mounting kit is included in the leather pocket automaticallyIn the quick-release solution, the leather pockets must be adapted to the specific model as each leather bag holder is differently shapedWe recommend fitting the equipment in our factory through our saddlersQuick release fastener factory assembly item number: 700402Quick release self-assembly item number: 700403If you would like to buy a new carrier for a different motorcycle and you still have old leather bags with a closure system from the old carrier, these bags will probably not fit to the new carrier, because each carrier is individual, model-specific.But here, too, we can provide a remedy. Please send us the leather bags before the order with a companion letter. An offer is then created for you. We can then exchange the rear panels of the Hepco & Becker leather bags and use new ones; Model-specific quick release incl.Note:Leather bags with C-Bow mount do not fitHepco & Becker side case or aluminum case do not fit

The HEPCO&BECKER Completecarrier Set consists of a sidecarrier frame in combination with a rear rack, which only can be mounted together. Outstanding fit - every carrier is adapted precisely to the motorcycle model. High quality surface finishing guarantees long durability.for nearly all Hepco&Becker hard luggage side cases on the side carrierfor nealry every Hepco&Becker topcase on the rearrackrecommended loading: 10kg per box on the side and 5kg into the topcase (please check manual and motorcycle manufacturer for more info)delivery: sidecarrier reght+left, rear rack, mounting kit, manualthe Orbit Topcase and Topcases with universal plastic plate won't fit the rear rackC-bow bags won't fit to the side carrierthe sidecases need the aluadapters 700114 which are normaly within the delivery of the sidecases

Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction

The chrome-finished Sissybar without a luggage rack for the Kawasaki VN 15-Spoke Wheel (1988-1992) provides your passenger with a more relaxed journey and instills a sense of security, thanks to the comfortable backrest. With its high-quality surface finish, this Sissybar seamlessly blends into the appearance of your motorcycle. Typically, it easily combines with the appropriate C-Bow mounts, leather bag holders, or luggage racks – always pay attention to the vehicle-specific details and follow the installation manual for a smooth attachment. Luggage systems typically do not require any approval or certification. Prepare for comfortable rides that offer your passenger a pleasant sense of security and relaxation!

A gleaming appearance with a luggage rack. This loos is distinctive to a chopper. Always comfotable on the road! All components are chromed (some models also available in black), polished to a high gloss, and perfectly adapted to the character of your bike.With the comfortable backrest, the passenger can relax and feel secure while riding. A HEPCO&BECKER Sissybar with a luggage rack makes it easier to carry small luggage. Optional: The aluminium rear rack enlargement for Handbags (ground and anodized, Item: 800000 00 09) ensures safe attachement.custom designed for each motorcyclesturdy, elegant designQuality German steel tubing with premium high-gloss surface finishprecise manufacturingeasy assemblyincl. assembly instruction and mounting kitcan mostly be combined with C-bow sidecarrier or normal hard luggage sidecarrier (please check manual or bike specific note for more info)recommended load on the rear rack: 5kg (please check manual or manufacturer of motorcycle for more info)