With these black tank guards by HEPCO&BECKER designed for the Honda CRF 1000 Africa Twin (2018-2019), you perfectly follow your motorcycle’s lines, adding a unique character to its appearance. In case of a tip-over or unexpected ground contact, they protect not only the bike but also you as the rider from significant damage, providing optimal protection and preventing costly repairs after unexpected mishaps.
The material efficiently absorbs impact forces, ensuring added safety. Following a fall, it's advisable to replace the guards, as invisible damage to welds or the material might compromise their protective capabilities in subsequent incidents. Individual parts or sides can be easily ordered via email from us.
These guards shield the tank, side fairings, and front and feature a high-quality surface finish, equally useful for securing the motorcycle. Crafted from sturdy round tubing in Germany, the package includes both right and left guards along with the necessary mounting hardware.
Another advantage: These engine guards do not require registration or an ABE (General Operating Permit) – simply install and ride! However, please refer to the enclosed installation manual and the model-specific notes for any potential limitations.
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps
please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.
In order to make our tank guard for the Africa Twin even more stable, we now offer an additional bracket which fixes the tank guard in the event of a fall. Thus, the side cladding parts are also better protected.From autumn 2017 onwards, the tank protection bracket will be equipped with additional flanges to which the stiffening bracket is mounted.Older tank guards can be retrofitted for a small extra charge. Please contact us via mail: shop@hepco-becker.de
Black powdercoated
Solid steel construction
Even more stability of the tank guard
Picture shows the uncoated prototype version
Designed for the Honda CRF 1000 Africa Twin (2018-2019), these stainless steel tank guards by HEPCO&BECKER perfectly trace the lines of your motorcycle, giving it a distinctive character. In case of a tip-over or unintended ground contact, they protect not only the bike but also you as the rider from significant damage, providing optimal protection and preventing costly repairs after unexpected mishaps.
The material efficiently absorbs impact forces, ensuring added safety. Following a fall, it's advisable to replace the guard, as invisible damage to welds or the material might compromise its protective capabilities in subsequent incidents. Individual parts or sides can be easily ordered via email from us.
This guard shields the tank, side fairings, and front and features a high-quality surface finish, equally useful for securing the motorcycle. Crafted from sturdy round tubing in Germany, the package includes both right and left guards along with the necessary mounting hardware.
Another advantage: These engine guards do not require registration or an ABE (General Operating Permit) – simply install and ride! However, please refer to the enclosed installation manual and the model-specific notes for any potential limitations.
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
The fixed side case carrier in black is specifically designed for your Honda CRF 1000 Africa Twin from the years 2018 to 2019. It is securely attached to the motorcycle frame, providing a sturdy foundation for nearly all Hepco&Becker touring side case systems.
The cases are securely fastened to the carrier using a metal locking mechanism to prevent theft. An additional locking adapter is required for this purpose, which is usually included in the delivery of the side cases. This locking adapter is attached to the carrier on the rear right and left sides, providing the receptacle for the case locking mechanism.
The model-specific carriers are robustly designed and offer effective protection for the rider's or passenger's legs in case of a fall. The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any issues. Please refer to the installation instructions and model-specific guidelines for more information.
The construction is made of steel tubing and is manufactured in Germany. The surface finish is of high quality. The carriers fit most Hepco&Becker hard-shell side cases. Please pay attention to model-specific guidelines for each carrier for possible limitations. The turn signals usually remain in their original position, but may need to be adjusted in some cases to ensure the correct light angle. Included in the delivery are the carriers for the right and left sides, the necessary installation materials, and an instruction manual.
Luggage systems generally do not require ABE or registration. The tube diameter is 16 mm.
The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.
The Easyrack Topcaseträger in black has been specifically designed for your Honda CRF 1000 Africa Twin of the model years 2018-2019. This carrier allows for combination with the original luggage rack and consists of a model-specific mounting kit and the Easyrack adapter plate to accommodate Hepco&Becker top cases or soft luggage (not suitable for top cases with a universal plastic plate).
Your Easyrack Topcaseträger system has been designed to seamlessly integrate into the overall design of your motorcycle. Constructed from high-quality aluminum in combination with a steel base carrier, your Easyrack not only provides high strength but also an appealing appearance. Integrated attachment points for luggage straps allow for secure fastening of your items.
The carrier is made of a solid base structure made of steel and an aluminum carrier plate. Included in the delivery are your model-specific Easyrack top case carrier, the mounting kit, and an installation guide. No additional adapters are required for attaching top cases. The surface coating ensures a high-quality appearance.
Your Easyrack functions similarly to the Alurack top case carrier, with the difference that the bracket for top case attachment can be folded down when not in use. The model-specific base carrier is the same for both carriers.
Your carrier does not require an ABE or registration. The recommended load capacity is 5 kg (please consider model-specific information, the installation guide, and the motorcycle manufacturer's specifications). Please note that heavy luggage should generally not be carried in the top case but rather in the side cases or tank bag. The recommended maximum speed is 130 km/h.
Please note that the Easyrack Topcaseträger system has been developed for the motorcycle's original condition and has not been tested with accessory items such as exhaust, license plate holders, or other indicators.