The black C-Bow side carriers for the Honda CBF 500 (2004-2007), CBF 600 (2004-2007), CBF 600 (2008-2013), and CBF 1000 (2006-2011) are sturdy carriers for attaching Hepco&Becker C-Bow side bags and cases to your motorcycle. These carriers are specifically designed to securely and reliably mount the C-Bow bags.
The side carriers feature a high-quality surface finish. However, please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these carriers. Likewise, Krauser K-Wing cases are not intended for use with the C-Bow carrier.
The recommended load capacity is 5 kg per bag or case. It's important to follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions.
In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier.
It's important to know that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers.
The carriers are specifically designed for the stock condition of your machine. However, please note that they have not been tested with accessories such as exhausts, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate light emission angle. The exhaust stream should not be directed toward the bags.
The black Lock-it side case carrier by Hepco & Becker is specifically designed for the Honda CBF 1000 (model years 2006-2011). This carrier is constructed from German steel tubing and custom laser-cut parts, which are reinforced at critical stress points.
Mounting and dismounting the carriers is incredibly easy and takes only seconds. You simply need to loosen the attached Lock-it screws by a quarter turn, and the side parts can be removed either to the rear or to the side. For additional theft protection, you can optionally use the lockable Lock-it screws.
The side cases are securely locked to the carrier using a lock located on the case itself. For this purpose, you will need the lock adapters, which are usually included in the case's packaging. These lock adapters are screwed onto the carrier on the right and left sides, providing a mounting point for the case locks.
The construction of the carrier is robust and made in Germany. It is constructed from high-quality steel tubing and offers excellent stability. The carrier material is coated with a high-quality surface finish.
The installation of the Lock-it side case carrier is generally straightforward. Please refer to the included installation manual for specific instructions. The package includes the right and left carriers, the necessary mounting hardware, and an installation manual.
This side case carrier is compatible with most Hepco & Becker hard-shell side cases. Please observe model-specific instructions to account for any potential restrictions.
Luggage systems typically do not require a General Operating Permit (ABE) or registration. The tube diameter is 16 mm.
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
The black Alurack top case carrier by Hepco & Becker is specifically designed for the Honda CBF 1000 (model years 2006-2011). This carrier consists of a model-specific mounting kit and an aluminum adapter plate for attaching Hepco & Becker top cases or soft luggage (not suitable for top cases with a universal plastic plate).
Each Alurack top case carrier is custom-developed to fit the respective motorcycle model seamlessly. The combination of high-quality aluminum and a steel base carrier provides the Alurack with high strength and an elegant appearance. Additional attachment points for luggage straps are integrated into the design of the rack, allowing secure attachment of items such as luggage rolls.
The basic construction of the Alurack consists of steel and an aluminum carrier plate. Included in the package are the model-specific Alurack top case carrier, a mounting kit, and an installation manual. No additional adapters are required to mount the top case.
The Alurack features a high-quality surface finish and functions in a similar way to the Easyrack top case carrier. The difference is that the bracket for mounting the top case on the Alurack is fixed upwards and cannot be folded down. The model-specific base carrier is the same for both the Easyrack and the Alurack.
To attach the Hepco & Becker Alu Standard top case 35, a special bracket is required instead of the standard Alurack bracket (item numbers: 700007350 or 700007351).
Luggage carriers generally do not require a General Operating Permit (ABE) or registration. The recommended maximum load capacity is 5 kg (please refer to the model-specific instructions, the included installation manual, and the motorcycle manufacturer's specifications).
It is recommended not to carry heavy luggage in the top case but rather in the side cases or tank bag. The recommended maximum speed is 130 km/h.
The Alurack was developed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.
The black Easyrack top case carrier has been specifically designed for your Honda CBF 1000 models from 2006 to 2011. With this carrier, you have the opportunity to conveniently expand the storage space on your motorcycle. It consists of a model-specific installation kit and an Easyrack adapter plate, allowing you to attach Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate.
The design of the Easyrack seamlessly integrates into the overall look of your motorcycle. The combination of high-quality aluminum and a sturdy steel base ensures not only durability but also an appealing appearance. Additional attachment points in the design allow for secure installation of luggage rolls or other accessories.
The solid construction made of steel and aluminum ensures longevity and stability.
Included in the package are the model-specific carrier, an installation kit, and a comprehensive installation manual. Additional adapters are not required to securely mount Hepco&Becker top cases or soft luggage.
The functionality of the Easyrack is technically comparable to the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, whereas the bracket on the Alurack remains in an upright position.
The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for straightforward installation.
The luggage carrier is exempt from ABE or registration requirements and fulfills all relevant legal standards.
The recommended load capacity is 5 kg. Please refer to the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety.
It is recommended to transport heavy luggage preferably in the side cases or tank bag to maintain the stability and balance of your motorcycle.
The recommended maximum speed is 130 km/h (80 mph) to ensure optimal performance and safety.
The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.
The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.
Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.