The black C-Bow side carriers for the Honda CB 1300 (2003-2009) are sturdy carriers designed to attach Hepco&Becker C-Bow side bags and cases to your motorcycle. These carriers feature a high-quality surface finish. Please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these carriers. Likewise, Krauser K-Wing cases are not intended for use with the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. It's important to follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier. It's important to know that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers. The carriers are specifically designed for the stock condition of your machine. However, please note that they have not been tested with accessories such as exhausts, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate light emission angle. The exhaust stream should not be directed toward the bags.

If you ride a Honda CB 1300 (2003-2009) and are looking for securely bolted side case carriers, then the Hepco&Becker side case carriers in stylish black are the perfect choice! These side case carriers from Hepco&Becker, firmly bolted to the motorcycle frame, are compatible with nearly all Hepco&Becker touring side case systems. The cases are securely fastened to the carrier using a metal locking mechanism. To do this, you'll need a lock adapter, which is usually included in the side case package. This adapter is bolted to the rear right and left of the carrier and provides the receptacle for the case locking mechanism. The model-specifically designed carriers are solidly constructed and offer effective protection for the rider's or passenger's legs in the event of a fall. In most cases, Hepco&Becker side case carriers can be easily combined with our rear carriers. Please refer to the installation instructions and model-specific notes for more information. These carriers are made of high-quality steel tubing and are MADE IN GERMANY. They are firmly bolted to the motorcycle frame, ensuring maximum stability. The high-quality surface finish gives them an appealing appearance. The carriers are compatible with most Hepco&Becker hard shell side cases. Please observe model-specific notes on the respective carrier in case of any potential limitations. Typically, the turn signals remain in their original position, but they may occasionally need to be adjusted to achieve a specific beam angle, as described in the product's installation instructions. The package includes both right and left carriers, along with the necessary mounting materials and instructions. Luggage systems generally do not require type approval (ABE) or registration. The tubing diameter is 16 mm.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

The black Easyrack top case carrier has been specifically designed for your Honda CB 1300 models from 2003 to 2009. With this carrier, you have the opportunity to conveniently expand the storage space on your motorcycle. It consists of a model-specific installation kit and an Easyrack adapter plate, allowing you to attach Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack seamlessly integrates into the overall look of your motorcycle. The combination of high-quality aluminum and a sturdy steel base ensures not only durability but also an appealing appearance. Additional attachment points in the design allow for secure installation of luggage rolls or other accessories. The solid construction made of steel and aluminum ensures longevity and stability. Included in the package are the model-specific carrier, an installation kit, and a comprehensive installation manual. Additional adapters are not required to securely mount Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically comparable to the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, whereas the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for straightforward installation. The luggage carrier is exempt from ABE or registration requirements and fulfills all relevant legal standards. The recommended load capacity is 5 kg. Please refer to the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in the side cases or the tank bag to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h (80 mph) to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

If you ride a Honda CB 1300 (2003-2009) and are in search of a high-quality black Alurack top case carrier, we have the perfect solution for you! The Alurack top case carrier consists of a model-specific mounting kit and an Alurack adapter plate designed specifically to accommodate Hepco&Becker top cases or soft luggage (not suitable for top cases with a universal plastic plate). Each Alurack top case carrier is model-specifically developed to seamlessly integrate into the overall look of your motorcycle. Thanks to its construction from high-quality aluminum in combination with a steel base carrier, the Alurack possesses high strength and an extremely elegant appearance. Additional attachment points for luggage straps are integrated into the design of the rack, allowing you to securely fasten items such as luggage rolls. The solid base construction is made of steel and an aluminum carrier plate. Included in the package are the model-specific Alurack top case carrier, the mounting kit, and installation instructions. No additional adapters for top case attachment are required. The high-quality surface finish ensures an appealing appearance. Technically, the Alurack top case carrier functions similarly to the Easyrack top case carrier, with the difference that the bracket for top case attachment is rigidly positioned upward and cannot be folded down. The model-specific base carrier is the same for both Easyrack and Alurack. For the attachment of the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the standard Alurack bracket (item number: 700007350 or 700007351). Top case carriers generally do not require ABE (German type approval) or registration. The recommended load capacity is 5 kg (please observe model-specific notes, the installation instructions, and the motorcycle manufacturer's information). Heavy cargo should generally not be transported in the top case but rather in the side cases or tank bag. The recommended maximum speed is 130 km/h. The Alurack top case carrier is designed for the motorcycle's stock condition and has not been tested with accessory items such as exhaust systems, license plate holders, or other turn signals.

The black main stand for the Honda CB 1300 (2003-2007) is an essential accessory for your ride. Stability and robustness are crucial here. The HEPCO&BECKER main stands ensure just that. They are easy to operate, rarely limiting the bike's lean angle while riding, and offer extreme durability. Thanks to their sophisticated geometry and non-slip tread, it's effortless to securely park your motorcycle in any situation. These precisely crafted stands are highly stable, sandblasted, primed, and powder-coated in black, ensuring weather resistance and durability. Main stands not only ease maintenance tasks but also ensure stability, especially during refueling. During winter storage, they relieve pressure on suspension components and the rear wheel. The included ABE (General Operating Permit) ensures hassle-free approval. Typically, these stands hardly limit the bike's lean angle and provide a high-quality surface finish. The package includes the main stand, mounting material, and an instruction manual. Please refer to the attached assembly instructions. Additional tools for attaching the tension spring are also available, item number: 700030.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.