Here you will find model-specific products and accessories for My bike MOTO-GUZZI.
Among universal products, here you can find the following example Accessories – depending on availability for your bike:
C-Bow carrier & luggage Sidecarrier for your MOTO-GUZZI
Protection & Crash bars for My bike MOTO-GUZZI
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for MOTO-GUZZI
As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags,
Topcases
and Tankbags
etc. are also linked as related products for their relative carriers.
With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova.
High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts
ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation)
Improved traffic light conditions
Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging
Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set
Connection is only via the battery, no connection to the vehicle wiring harness is required
No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote:
The lights can only be switched on approx. 5-15 seconds after the engine has been started. A
voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit.
In older vehicles, this can be achieved by briefly increasing the engine speed.
Switching off must be done manually using the switch. The NOVA LEDs continue to light up until
the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage
falls below this limit do the lights switch off automatically via the control unit. When switching
on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.
C-Bow sidecarrier for Moto Guzzi V7 Special/Stone/Centenario (850 ccm) (2021-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructionsOnly suitable for models with a universal plate when mounting the top case.
A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
C-Bow sidecarrier for Moto Guzzi V 85 TT (2019-2023)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany
A gleaming appearance with a luggage rack. This loos is distinctive to a chopper. Always comfotable on the road! All components are chromed (some models also available in black), polished to a high gloss, and perfectly adapted to the character of your bike.With the comfortable backrest, the passenger can relax and feel secure while riding. A HEPCO&BECKER Sissybar with a luggage rack makes it easier to carry small luggage. Optional: The aluminium rear rack enlargement for Handbags (ground and anodized, Item: 800000 00 09) ensures safe attachement.custom designed for each motorcyclesturdy, elegant designQuality German steel tubing with premium high-gloss surface finishprecise manufacturingeasy assemblyincl. assembly instruction and mounting kitcan mostly be combined with C-bow sidecarrier or normal hard luggage sidecarrier (please check manual or bike specific note for more info)recommended load on the rear rack: 5kg (please check manual or manufacturer of motorcycle for more info)
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
The carriers are model-specific and do only fit the motorcycle listed on the manual. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If necessary, soft luggage can also be lashed down without any problems. The carrier offers many possibilities for this. If there is not enough space, the carrier can be combined with the Hepco & Becker universal rack extension.Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side cases or the tank bag.Can usually be combined with side case carriers or C-Bow holders without any problems (note the installation instructions and model-specific information)Scope of delivery: luggage rack + mounting material + instructions
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
C-Bow sidecarrier for Moto Guzzi Griso 850/1100/1200 (2005-2016)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps
please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.
A gleaming appearance with a luggage rack. This loos is distinctive to a chopper. Always comfotable on the road! All components are chromed (some models also available in black), polished to a high gloss, and perfectly adapted to the character of your bike.With the comfortable backrest, the passenger can relax and feel secure while riding. A HEPCO&BECKER Sissybar with a luggage rack makes it easier to carry small luggage. Optional: The aluminium rear rack enlargement for Handbags (ground and anodized, Item: 800000 00 09) ensures safe attachement.custom designed for each motorcyclesturdy, elegant designQuality German steel tubing with premium high-gloss surface finishprecise manufacturingeasy assemblyincl. assembly instruction and mounting kitcan mostly be combined with C-bow sidecarrier or normal hard luggage sidecarrier (please check manual or bike specific note for more info)recommended load on the rear rack: 5kg (please check manual or manufacturer of motorcycle for more info)
Classic tube topcase carrier for HEPCO&BECKER topcases of the highest quality. HEPCO&BECKER luggage carrier are specially designed for almost all our topcases. But not just new topcases fit. Also older HEPCO&BECKER models can be mounted. The basic mounting has not changed.Not suitable are: Hepco & Becker Orbit topcase and topcases with universal adapter plate.The carriers are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, HEPCO&BECKER tube topcasecarrier ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If required, soft HEPCO&BECKER universal rear rack enlargement (part no: 610053 or 610052)Recommended load: Topcase + approx. 5kg load capacityPlease refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the productUsually without problems; side carrier or C-Bow carrier can be combined with tube topcasecarrier (note the mounting instructions)Incl. Installation material and instruction
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany
C-Bow sidecarrier for Moto Guzzi California 1400 Eldorado (2015-2020)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info
C-Bow sidecarrier for Moto Guzzi V7 Special/Stone/Centenario (850 ccm) (2021-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info