BMW R nine T Scrambler Accessories

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps

Engine protection: crash bar for BMW R nineT Scrambler from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your BMW R nineT Scrambler and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2016-2023Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for BMW R nineT Scrambler leftEngine guard for BMW R nineT Scrambler right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Engine protection: crash bar for BMW R nineT Scrambler from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your BMW R nineT Scrambler and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: SilverFor model year(s): 2016-2023Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for BMW R nineT Scrambler leftEngine guard for BMW R nineT Scrambler right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Motorbike underride guard: engine protection plate for BMW R nineT Scrambler (2016-2023), silver Even a pavement can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Our engine protection plates protect the manifold and engine block from impacts and stone chipping, even with the heaviest ground contact. With our underride guard for R nineT Scrambler, you not only upgrade your motorbike in terms of safety, but also automatically give it a certain off-road look. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminium, our Hepco&Becker engine protection plate lets enough air through for cooling thanks to its special shape and is naturally angled, so that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. It enhances the look of your motorbike and is guaranteed never to let you down Features & important details: Material: High-strength aluminium, made in Germany Surface finish: Brushed, anodised Colour: Silver anodisedFor model year(s): 2016-2023Provides additional protection for sensitive parts on the manifold and engine block Scope of delivery: Engine protection plate for BMW R nineT ScramblerMounting material / screw set Illustrated installation instructions (DE / EN) Important notes: No ABE or registration is required for this product if fitted as intended Please observe the fitting instructions and model-specific information to determine whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.

Our Hepco&Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look.adapted to the design of the motorbikeeffective protectionno reflections or danger from glaresimple mounting on mostly existing screw pointssolid construction made from German steelrobust and high-quality coatingmade in Germany without TÜV

Secure Hepco&Becker guard for the gimbal.Made in GermanyExtremely stable constructionMounting on existing screw pointsIncl. mounting material and instructions

Side stand extension BMW R nineT (2014-2016) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, crushed stone, etc. Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your R nineT is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Model-specific development for the BMW R nineT For model year(s): 2014, 2015, 2016 Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

Side stand extension BMW R nineT Scrambler (2016-2023) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt etc. Quick and easy to fit, made from high-quality, CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your R nineT Scrambler is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Developed specifically for the BMW R nineT Scrambler For year(s) of construction: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

To make it easier for the passenger, we pay attention to high-quality surface coatingsimple assemblyincl. mounting materialsturdy steel construction MADE IN GERMANYNo ABE or registration is required for this product if installed as intended

Basic tank ring for BMW R nineT Scrambler (2016-2023)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for BMW R nineT Scrambler (2016-2023) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap in the direction of travel at the front of the tank bag and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

C-Bow side bag holder for BMW R nineT Scrambler (2016-2023) / Urban G/S 40 Years Edition is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

C-Bow side bag holder for BMW R nineT Scrambler (2016-2023) / Urban G/S 40 Years Edition is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: right-hand side, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

The tubular luggage racks from Hepco&Becker are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications) Can usually be combined with side pannier racks or C-Bow holders without any problems (follow the fitting instructions and model-specific information) Luggage racks generally do not require an ABE or registration Scope of delivery: Luggage rack + mounting material + instructions Made in Germany Not suitable for topcases, only suitable for soft luggage!

The slim, lightweight and unobtrusive luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorbike. A rucksack or bag can be lashed through the side slots. Our rear panniers with the Basic System can also be easily attached to it using an interchangeable module. suitable for rear panniers with Basic attachmentflexibleincl. screw set and installation instructionsaBE or registration is not necessaryhigh-quality powder coatingsolid construction

Steel canister with 5 litre capacity and holder/adapter for Hepco&Becker C-Bow side holderSturdy basic holder with sophisticated hole pattern for 3 mounting positions on the existing C-Bow holderDelivery includes mounting material and tensioning strap, without model-specific holderRequires model-specific C-Bow base holder without the actual C-Bow adapter for mountingQuick and easy to fit, the additional canister is a visual highlight for any motorbike. Thanks to the ingenious hole pattern, the sturdy base holder can be mounted in 3 positions on an existing C-Bow holder. The high-quality coated steel canister is authentically and stylishly fixed to the base holder using tensioning material. The canister has a volume of 5 litres. Incl. mounting material and tensioning strap. Supplied without model-specific holder. A model-specific C-Bow base holder without the actual C-Bow adapter is required for installation. Enquiry at shop@hepco-becker.deStyle and function - The new steel canister for your C-Bow holder!