Our sturdy black C-Bow side carriers are specifically designed for the KTM 390 Duke (model years 2013-2016). These carriers allow you to attach the practical Hepco&Becker C-Bow side bags and cases and add an elegant look to your motorcycle through their high-quality surface finish. Please note that regular Hepco&Becker hard cases like the Junior or Journey are not compatible, and Krauser K-Wing cases cannot be attached to the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Be sure to follow the installation instructions, consider vehicle-specific guidelines, and check the manufacturer's information for potential restrictions. In most cases, you can easily combine our C-Bow side carrier with top case carriers, sissy bars, or solo racks. Please consult the installation instructions or the vehicle-specific guidelines for the respective carrier. Keep in mind that luggage rack extensions can affect the attachment of bags to the carrier. The best part? Our luggage carrier does not require a General Operating Permit (ABE) and does not need to be registered in the vehicle documents. Included in the package are the left and right carrier sides, a clear installation guide, and the mounting kit. Please note that this C-Bow side carrier was specifically developed for your motorcycle's stock condition. It has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags maintain adequate clearance from the exhaust, and that the turn signals maintain a sufficient angle when using aftermarket accessories. The exhaust stream should never be directed at the bags.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

The fixed-mount side case carriers by Hepco&Becker are specifically designed for the KTM 390 Duke (2013-2016) and offer a robust solution for attaching side cases. These carriers are securely bolted to the motorcycle's frame and allow for the secure attachment of nearly all Hepco&Becker touring side case systems. The cases are securely fastened to the carriers using a metal locking mechanism. To achieve this, an additional lock adapter is required, which is typically included with the side cases. This lock adapter is bolted to the carrier on the rear right and left sides and provides the attachment point for the case locking mechanism. The side case carriers are model-specific and also provide effective protection for the rider's or passenger's legs in case of a fall. In most cases, Hepco&Becker side case carriers can be easily combined with rear luggage racks. Please refer to the installation instructions and model-specific notes for more information. These carriers are constructed from steel tubing and are manufactured in Germany. They are firmly bolted to the motorcycle frame and feature a high-quality surface finish. The side case carriers are compatible with most Hepco&Becker hard-shell side cases (please check for model-specific notes on any potential limitations). In most cases, the turn signals remain in their original positions, although it may be necessary to occasionally reposition them to achieve a specific light distribution angle. Please consult the product's installation instructions for guidance. The package includes both the right and left side of the side case carriers, along with the necessary mounting hardware and instructions. Generally, luggage systems do not require a general operating permit (ABE) or registration. The tube diameter is 16 mm.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The Hepco&Becker Alurack top case carrier has been specifically designed for the KTM 390 Duke (2013-2016). This carrier consists of a model-specific mounting kit and an Alurack adapter plate designed to accommodate Hepco&Becker top cases or soft luggage (please note that it is not suitable for top cases with a universal plastic plate). Each Alurack top case carrier is custom-tailored for the respective motorcycle model to seamlessly integrate with the overall look of the bike. Thanks to its high-quality aluminum construction combined with a steel base carrier, the Alurack offers high strength and adds an elegant appearance to your motorcycle. Additional attachment points for luggage straps are integrated into the design of the carrier to allow for the secure attachment of items such as luggage rolls. The basic construction of the carrier consists of steel and an aluminum carrier plate. Included in the package are the model-specific Alurack top case carrier, the mounting kit, and an installation manual. No additional adapters for top case mounting are required. The high-quality surface finish gives the carrier an appealing look. Technically, the Alurack top case carrier functions similarly to the Easyrack top case carrier, with the difference that the bracket for top case attachment remains fixed in an upright position and cannot be folded down. The model-specific base carrier is the same for both Easyrack and Alurack. The Alurack is designed for the stock condition of the motorcycle and has not been tested with aftermarket accessories such as exhaust systems, license plate holders, or other turn signals. Please refer to the model-specific instructions provided in the included installation manual and consult the information from the motorcycle manufacturer. No general operating permit (ABE) or registration is required for this luggage carrier. The recommended load capacity is 5 kg, and you should pay attention to model-specific instructions, as well as the installation manual and the information from the motorcycle manufacturer. Please note that heavy loads should generally not be transported in the top case but rather in the side cases or tank bag. The recommended maximum speed is 130 km/h.

The black Easyrack top case carrier is specifically designed for the KTM 390 Duke models from the years 2013 to 2016. This carrier significantly enhances the transportation capabilities of your motorcycle. It consists of a specially tailored installation kit and an Easyrack adapter plate, enabling the mounting of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack seamlessly integrates into the appearance of your KTM 390 Duke. The use of high-quality aluminum in combination with a sturdy steel base ensures durability and gives your motorcycle an appealing look. Additional attachment points in the design allow for secure mounting of luggage rolls or other accessories. Included in the package are the model-specific carrier, an installation kit, and a detailed installation manual. No additional adapters are required for the secure mounting of Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically the same as that of the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, while the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for easy installation. The luggage carrier is exempt from ABE or registration requirements and complies with all relevant legal regulations. The recommended load capacity is 5 kg. Please follow the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in a top case or a backpack to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.