Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Our sturdy black C-Bow side carriers are specifically designed for the KTM 125/200 Duke (model years 2011-2016). These carriers allow you to attach the practical Hepco&Becker C-Bow side bags and cases and add a stylish addition to your motorcycle through their high-quality surface finish. Please note that regular Hepco&Becker hard cases like the Junior or Journey are not compatible, and Krauser K-Wing cases cannot be attached to the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Be sure to follow the installation instructions, consider vehicle-specific guidelines, and check the manufacturer's information for potential restrictions. In most cases, you can easily combine our C-Bow side carrier with top case carriers, sissy bars, or solo racks. Please consult the installation instructions or the vehicle-specific guidelines for the respective carrier. Keep in mind that luggage rack extensions can affect the attachment of bags to the carrier. The best part? Our luggage carrier does not require a General Operating Permit (ABE) and does not need to be registered in the vehicle documents. Included in the package are the left and right carrier sides, a clear installation guide, and the mounting kit. Please note that this C-Bow side carrier was specifically developed for your motorcycle's stock condition. It has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Ensure that the bags maintain adequate clearance from the exhaust, and that the turn signals maintain a sufficient angle when using aftermarket accessories. The exhaust stream should never be directed at the bags.

The black Alurack top case carrier for the KTM 125/200 Duke (2011-2016) consists of a model-specific mounting kit and an Alurack adapter plate designed to accommodate Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. Each Alurack top case carrier is specifically designed for a particular model to seamlessly integrate into the overall appearance of the motorcycle. Thanks to the use of high-quality aluminum in combination with a steel base carrier, the Alurack boasts high strength and an elegant appearance. The design of the carrier includes additional attachment points for luggage straps to securely fasten items such as luggage rolls. The basic construction of the carrier consists of steel and an aluminum support plate. Included in the delivery is the model-specific Alurack top case carrier, the mounting kit, and an installation manual. No additional adapters for top case attachment are required. The high-quality surface finish gives the carrier an appealing look. The Alurack top case carrier functions almost identically to the Easyrack top case carrier, with the difference being that the bracket for top case attachment is fixed upward and cannot be folded down. The model-specific base carrier is identical for both the Easyrack and Alurack. To accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351). Luggage carriers of this type generally do not require a General Operating Permit (ABE) or registration. The recommended load capacity is 5 kg. Please observe the model-specific instructions provided in the supplied installation manual and the information from the motorcycle manufacturer. Heavy loads should generally not be transported in the top case but rather in the side cases or tank bag. The recommended maximum speed is 130 km/h. The carrier was developed for the motorcycle's standard condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.

The black, firmly screwed side case carriers from Hepco&Becker are securely attached to the frame of the KTM 125/200 Duke (2011-2016). These carriers are compatible with almost all Hepco&Becker touring side case systems. The cases are securely fastened to the carrier using a metal locking latch. An additional lock adapter is required for this, which is usually included in the side case's delivery. This lock adapter is screwed onto the rear right and left of the carrier and provides the attachment point for the case locking latch. The model-specific carriers are robustly designed and offer effective protection for the legs of the rider or passenger in the event of a fall. In most cases, Hepco&Becker side case carriers can be combined with the rear carriers without any problems. Please refer to the installation instructions and model-specific notes for further details. These carriers are made of steel tube and are MADE IN GERMANY. They are firmly bolted to the motorcycle frame and have a high-quality surface finish. They are suitable for most Hepco&Becker hard case side cases. Please refer to the model-specific notes of the respective carrier for possible limitations. In most cases, the turn signals remain in their original position but may need to be slightly adjusted to ensure a certain beam angle. Please refer to the product's installation instructions for this. The delivery includes right and left carrier sides, as well as the required mounting material and instructions. Luggage systems of this kind generally do not require a General Operating Permit (ABE) or registration. The tube diameter is 16 mm.

The black Easyrack top case carrier is specifically designed for the KTM 125 Duke and 200 Duke models from 2011 to 2016. This carrier allows you to expand the transportation capabilities of your motorcycle. It consists of a specially tailored installation kit and an Easyrack adapter plate, enabling the mounting of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack seamlessly integrates into the appearance of your KTM 125 Duke or 200 Duke. The use of high-quality aluminum in combination with a sturdy steel base ensures durability and gives your motorcycle an appealing look. Additional attachment points in the design allow for secure mounting of luggage rolls or other accessories. Included in the package are the model-specific carrier, an installation kit, and a detailed installation manual. No additional adapters are required for the secure mounting of Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically the same as that of the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, while the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for easy installation. The luggage carrier is exempt from ABE or registration requirements and complies with all relevant legal regulations. The recommended load capacity is 5 kg. Please follow the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in a top case or a backpack to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.