Whether you're navigating rough terrain, cruising the open roads, or dominating city streets, the black engine guard for Honda NC 700 X (2012-2013)/750 X/DCT (2014-2020) by Hepco&Becker is the ultimate choice for your ride. This guard acts as a shield, offering effective protection for your motorcycle against unexpected mishaps, whether in heavy off-road conditions or during everyday commutes. Crafted from an incredibly sturdy tube-in-tube construction, some newer models even come with integrated crash pads, ensuring both style and safety. These engine guards trace the lines of your bike perfectly, enhancing its individual character while serving as your motorcycle's suit of armor during spills or unwanted ground contact. Say goodbye to worrying about accidental drops! With comprehensive and user-friendly installation instructions, mounting these guards is a breeze. They're proudly MADE IN GERMANY at our facility in Pirmasens. Featuring high-quality metal coating, no ABE or registration is required - simply install and hit the road! Exclusive terms are available for official driving schools. Contact our customer service at Tel: (+49) 0 6331 / 1453 - 222 for more information.

These Lock-it side carriers by Hepco&Becker are made from high-quality German steel tubing and custom laser-cut parts, which are reinforced at heavily stressed points. This ensures a robust construction and durability. The special feature of these carriers is that they can be mounted and dismounted in seconds. You only need to loosen the pre-installed Lock-it screws by a quarter turn, and you can remove the side parts to the rear or to the side. For additional theft protection, you can optionally secure the carrier with our lockable Lock-it screws to deter potential thieves. All cases are locked to the carrier using a locking mechanism located on the case itself. To do this, you will need the lock adapters that are usually included with the case. These lock adapters are screwed onto the carrier on the right and left and provide a fastening point for the case's locking mechanisms. These side carrier are constructed sturdily and bear the "Made in Germany" quality seal. They are characterized by a high-quality surface finish. Installation is generally straightforward, and you will find detailed instructions in the included installation manual. The package includes both the right and left carriers, along with the necessary mounting hardware and an installation manual. Please check for any restrictions in the vehicle-specific information or the installation manual. These carriers are compatible with most Hepco&Becker hard side cases, with model-specific notes to be observed. In general, luggage systems of this type do not require a General Operating Permit (ABE) or registration, which simplifies installation and use. The tube diameter of these carriers is 16 mm.

The black Alurack top case carrier is a specially designed luggage solution for Honda NC 700 X (2012-2013) and 750 X/DCT (2014-2020) motorcycles. This carrier allows for the convenient attachment of Hepco&Becker top cases or soft luggage and provides a model-specific mounting kit solution combined with an adapter plate made of high-quality aluminum. The main feature of this carrier is its seamless integration into the harmonious overall appearance of the motorcycle. The Alurack top case carrier features an extremely solid construction, where a steel base carrier is combined with an aluminum carrier plate. This ensures high strength, durability, and stability. The design of the carrier has been carefully crafted to be not only functional but also visually appealing. A special feature of this carrier is the additional attachment points for luggage straps. These side slots provide the option to securely fasten luggage rolls, backpacks, or other items, making you well-equipped for longer tours or daily use. Included in the package of this set are the model-specific Alurack top case carrier, the mounting kit, and an assembly manual. It is important to note that no additional adapters for top case attachment are required, as this carrier is specifically tailored to the respective motorcycle models. Therefore, installation is straightforward and efficient. The Alurack top case carrier is characterized by its high-quality surface finish, which not only looks good but is also durable. From a technical standpoint, this carrier functions similarly to the Easyrack top case carrier, with one difference. In this model, the bracket for top case attachment remains rigidly upright and cannot be folded down. However, this is not an obstacle as top case attachment is simple and secure. If you wish to use the Hepco&Becker Alu Standard top case 35, a special bracket is required, which is mounted instead of the standard Alurack bracket. The item number for this bracket is provided for ease of selection and ordering. It is important to emphasize that luggage carriers of this type do not require a general operating license (ABE) or registration. The recommended load capacity for this carrier is 5 kg. However, it is strongly recommended to adhere to the model-specific instructions provided in the assembly manual and the specifications of the motorcycle manufacturer. It should be noted that heavy or bulky luggage items should generally not be transported in the top case but are better placed in the side panniers or a tank bag. The recommended maximum speed for using this carrier is 130 km/h. This carrier has been specifically designed for the motorcycle's original condition and has not been tested with accessory items such as exhaust systems, license plate holders, or other turn indicators.If you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350

Do you want to equip your Honda NC 700 X (2012-2013)/750 X/DCT (2014-2020) with stylish practicality? Our black C-Bow side carriers are the perfect choice. These sturdy carriers are specially designed to accommodate Hepco&Becker C-Bow side bags and cases. Their high-quality black surface finish adds a touch of elegance to your motorcycle. Please note that regular Hepco&Becker hard cases like the Junior or Journey are not compatible. Similarly, Krauser K-Wing cases do not fit the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Be sure to follow the installation instructions, vehicle-specific guidelines, and the manufacturer's recommendations for any potential restrictions. These side carriers can usually be combined without issues with top case carriers, sissy bars, or solo racks. However, please follow the installation instructions or vehicle-specific guidelines for each carrier. Luggage rack extensions may restrict the bag attachment to the carrier. The best part is that these carriers do not require an ABE or registration in your papers. The package includes the left and right carriers, an installation guide, and the mounting kit. Please be aware that these carriers were specifically designed for your bike's stock condition and have not been tested with accessories such as exhaust systems, license plate holders, or turn signals. Ensure that the bags have sufficient clearance from the exhaust, and that the turn signals maintain an adequate emission angle. The exhaust stream should not be directed toward the bags.

The black Easyrack top case carrier has been specifically developed for the Honda NC 700 X of the years 2012 to 2013 and the Honda NC 750 X/DCT of the years 2014 to 2020. This practical top case carrier offers not only additional storage space but also a high-quality construction to meet riders' demands. The Easyrack is model-specifically designed to seamlessly integrate into the motorcycle's harmonious appearance. Crafted from high-quality aluminum in combination with a robust steel base carrier, the Easyrack combines high strength with an elegant look. Additional mounting points for luggage straps are integrated into the carrier's design to enhance flexibility in load securing. The package includes the model-specific top case carrier, the appropriate mounting kit, and a detailed installation manual. No additional adapters are required to securely attach Hepco&Becker top cases or soft luggage. The Easyrack functions nearly identically to the Alurack top case carrier, with the unique feature that the bracket for top case attachment can be folded when not in use, while the Alurack bracket remains fixed upwards. The recommended load capacity is 5 kg. Please consider the model-specific instructions in the installation manual and the manufacturer's recommendations for safe usage. The Easyrack has been developed for the machine's stock condition and has not been tested with accessories like exhaust systems, license plate holders, or turn signals. It's recommended to transport heavy luggage in the side cases or tank bag rather than the top case. The recommended maximum speed is 130 km/h to ensure optimal performance and safety.

solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessoriesThe aluminum engine guard plate for the Honda NC 700 X (2012-2013) / 750 X (2014-2020) provides effective protection for your motorcycle against impacts and stone chipping, preventing potential damage to the engine housing. Our aluminum engine guard plate protects the headers and engine block even in the event of severe ground contact, ensuring a worry-free ride. The engine guard plate is crafted with the highest quality and is MADE IN GERMANY in our facility in Pirmasens. With a thickness of 3-4 mm, it is robust and fits precisely to the shape of your Honda NC 700 X / 750 X. The installation is straightforward using the supplied mounting kit and an easily understandable manual. Please refer to the installation instructions and model-specific notes to ensure that the engine guard plate fits perfectly to your motorcycle and there are no compatibility issues.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

Our black front protection bar is specifically designed for the Honda NC 700 X (2012-2013) and 750 X/DCT (2014-2020). It provides excellent protection at low speeds and effectively safeguards crucial components like indicators, clutch and brake levers, exhaust pipes, fairing parts, and more. The high-quality powder coating ensures durability and an attractive appearance. Mounting hardware is included for easy installation. We offer special conditions for driving schools. Please contact our representatives to learn more about these offers. You can reach us at Tel: 06331/1453-222.

Make your Honda NC 700 X (2012-2013)/750 X/DCT (2014-2020) stand out with our black Lock it rear protection bar. It's not just about the cool aesthetic but also about being your reliable shield during unexpected spills or slow-speed incidents. Our protection bars don't just secure indicators, levers, and exhaust; they safeguard fairing parts and more. The high-quality powder coating ensures not just durability but also a distinctive aesthetic appeal. And guess what? The mounting hardware is included for an effortless and straightforward installation. For driving schools, we have tailor-made offers because we understand the significance of protection and safety during extensive usage. Simply talk to our experts to take advantage of our special terms. Contact us at Tel: 06331/1453-222.