Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

The black front guard for the Honda CB 650 R (2019-2020) offers excellent protection. Designed for low-speed incidents, it is ideal for safeguarding against falls and accidents. It effectively protects turn signals, clutch and brake levers, exhaust mufflers, and various bodywork parts, effectively securing various components. The high-quality powder coating not only enhances its aesthetics but also ensures durability. The mounting materials required for installation are included. We offer special conditions for driving schools. Please contact our representatives at Tel: 06331/1453-222 to learn more.

Would you like to attach Hepco&Becker C-Bow side bags and cases to your Honda CB 650 R (2019-2020)? Our anthracite C-Bow side carriers offer a sturdy solution. These carriers are specifically designed to mount Hepco&Becker C-Bow side bags and cases on your motorcycle. The carriers are provided with a high-quality surface finish and are designed to maintain the appearance of your motorcycle. Please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these carriers. Similarly, Krauser K-Wing cases cannot be used with the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. It's important to follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier. It's important to know that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers. The carriers are specifically designed for the stock condition of your machine. However, please note that they have not been tested with accessories such as exhausts, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate light emission angle. The exhaust stream should not be directed toward the bags.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The Honda CB 650 R (2019-2020) deserves nothing but the best – our black rear protection bar. It's not just a style upgrade but also your reliable assistant during unexpected falls or slow-speed incidents. These protection bars don't just safeguard indicators, levers, and exhaust; they also preserve fairing parts and more. The high-quality powder coating ensures not just durability but also an appealing appearance. And the best part? The mounting hardware is included for an effortless installation. For driving schools, we have special deals because we understand the importance of protection and safety, especially with intensive use. Simply talk to our experts to take advantage of our special terms. Contact us at Tel: 06331/1453-222.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The black "Solid" engine guard is a perfect fit for the Honda CB 650 R (2019-2020) and provides ideal protection for extreme off-road riding. Its striking 3-point attachment to the motorcycle frame ensures optimal force distribution in case of falls or accidents. Its slim, sporty design efficiently channels forces into the existing frame points. The innovative design featuring high-strength plastic coating gives this crash bar a unique appearance. Functionality was key during the development of this crash bar, specifically designed for tough and uncompromising use in challenging terrains. After a fall, it's recommended to replace the crash bar, as unseen damages to welds or materials may compromise its protective capabilities in subsequent falls. Individual parts or sides of the crash bar can be easily ordered via email for swift repairs. This crash bar protects the engine, side fairings, and the front section. The high-quality coating ensures durability and weather resistance. The sturdy round tube is manufactured in Germany, guaranteeing top-notch quality. Included in the package are the right and left sides of the crash bar along with the necessary mounting materials. These engine guards do not require registration or ABE (General Operating Permit), but it's important to follow the supplied installation instructions.

The black Sportrack by Hepco&Becker provides an ideal solution for luggage attachment on supersport motorcycles like the Honda CB 650 R (2019-2020). The challenges of luggage attachment on these high-performance motorcycles are widely recognized. Nevertheless, Hepco&Becker offers a fitting solution: the Sportrack. It replaces the pillion seat and is anchored in the original mount, with the ability to be opened using the vehicle ignition key. This innovative design allows for versatile attachment possibilities for luggage straps, ensuring secure attachment of a variety of luggage items. The installation of the Sportrack is simple and straightforward. The high-quality powder coating not only provides an appealing look but also guarantees weather resistance and durability. The Sportrack can be quickly removed, following the same principle as the pillion seat. The versatile attachment possibilities for luggage straps provide a secure hold for various types of luggage. You can expand the Sportrack with an optional widening kit to securely attach larger luggage rolls. The design of the Sportrack resembles a pillion seat cover and is simultaneously an additional visual highlight. The secure luggage attachment directly behind the rider does not compromise the bike's handling and ensures unrestricted riding enjoyment. The black Sportrack is top case compatible, but only in combination with the Journey Topcases 30/40/50 in the universal version with a plastic plate. Please note that regular Hepco&Becker top cases with a metal locking mechanism on the top case bottom are not compatible. It can also be combined with tail bags featuring the Lock-it closure system, such as the Royster Lock-it tail bag. A General Operating Permit (ABE) or entry in the vehicle documents is not required. The included installation manual simplifies the setup process. Enjoy unrestricted riding pleasure and secure luggage attachment with the black Sportrack from Hepco&Becker on your Honda CB 650 R (2019-2020).

Do you want to enhance the functionality and versatility of your Honda CB 650 R (model years 2019 and 2020)? Our black Alurack top case carrier from Hepco&Becker offers the ideal solution. This set includes a model-specific mounting kit and an Alurack adapter plate, specially designed to accommodate Hepco&Becker top cases or soft luggage (not compatible with top cases with universal plastic plates). Each Alurack top case carrier is designed specifically to seamlessly integrate into the design of your Honda CB 650 R. Constructed from high-quality aluminum combined with a steel base carrier, the Alurack offers both high strength and a modern look. Additional attachment points for luggage straps are integrated into the carrier's design to allow secure attachment of luggage rolls or other items. The solid base construction is made of steel, while the aluminum carrier plate ensures stability. Included in the package is the model-specific Alurack top case carrier, the mounting kit, and a detailed manual. No additional adapters for top case mounting are required. The black design of the Alurack harmoniously blends into the appearance of your Honda CB 650 R. From a technical perspective, it functions similarly to the Easyrack top case carrier, with the top case mounting bracket fixed in an upward position and unable to be folded down. The model-specific base carrier is the same for both the Easyrack and Alurack. For the mounting of the Hepco&Becker Alu Standard Top Case 35, a special bracket is required, which is used instead of the regular Alurack bracket (part numbers: 700007350 or 700007351). The luggage carrier doesn't require a General Operating Permit (ABE) or registration. The recommended load capacity is 5 kg (please observe model-specific instructions, the installation guide, and the motorcycle manufacturer's specifications). It's advisable not to transport heavy items in the top case but rather in the side cases or tank bag. The recommended maximum speed for the Alurack top case carrier is 130 km/h. Please note that the carrier is designed for the motorcycle's stock condition and hasn't been tested with accessories such as exhausts, license plate holders, or other turn signals.

The Minirack Soft Luggage Rear Carrier in Black has been specifically designed for the Honda CB 650 R model from 2019 to 2020. This Minirack rear carrier by Hepco&Becker offers a sleek, lightweight, and inconspicuous solution for securely transporting soft luggage on your motorcycle. The Minirack allows you to individually attach soft luggage to the rear of your bike. The recommended load capacity for this Minirack rear carrier is between 3 and 5 kg. Please observe the vehicle-specific instructions in the installation manual and adhere to the guidelines provided by the motorcycle manufacturer to ensure the safety and stability of your motorcycle during transportation. It's important to note that this Minirack rear carrier is not suitable for mounting top cases. However, its design allows for secure attachment of soft luggage. Installing this Minirack rear carrier does not require a General Operating Permit (ABE) or registration. It is coated with high-quality powder coating to ensure durability and corrosion resistance. This Minirack rear carrier has been solidly manufactured in Germany and provides a reliable solution for securely transporting soft luggage on your Honda CB 650 R.