SIDECARRIER

The following applies to all basic side case carriers:

Holder for Hepco & Becker side cases

Complete carrier, consisting of side case carrier and tubular luggage rack for HEPCO & BECKER side cases and top cases

Side cases are fixed in the carrier with the retaining lock, a lock adapter must be screwed on the right and left, these are included in the scope of delivery of the case

Metal tube from a German steel forge, depending on the model; with high quality chrome plating or plastic coating

Comprehensive, easy-to-understand installation instructions

Side carriers can usually be combined with the top case carriers. There are restrictions on the product.

The basic side case racks are firmly connected to the motorcycle and carry side case systems from H&B. A special form are the complete carrier sets, consisting of a side case carrier and a luggage rack as a top case carrier. A complete carrier can only be assembled as a complete set.

Model selection: You can find out whether we have a carrier for your machine in our range under the MY BIKE function.

Only accessories, universal and spare parts are listed here.

Lock adapter for sidecases to side carrier (1 pc)

This aluminum adapter is used to hold the case lock on hard-shell and aluminum cases from Hepco & Becker. The screws are included in the mounting kit for the pannier rack. If these screws are no longer available, please contact us in advance. You can take a look at the installation instructions provided with the product beforehand so that you also know which screws you need. Caution: Spacer plates are also required for the side cases Alu Standard and Alu Exclusiv. The following kit is required for this: 710081

£17.25*

Thread locking medium strength MARSTON 10g

Manufacturer: Marston-Domsel GmbH Factory No .: MSS.585.F10-BK highly viscous · medium strength · removable · for all threaded metal connections · prevents breakage due to vibration, e.g. on gearboxes, motors, etc. · slightly oil-tolerant · connection can be released with normal tools · DVGW release · NSF P1 registered (Reg. No. 154175) · max. Thread: M36 · gap filling capacity: 0.25 mm · breakaway torque: 17-22 Nm · temperature resistance from -55 ° C to +150 ° C ·Additional technical characteristics Gap bridging max .: 0.25mm · Color: dark blue · Breakaway torque: 17-22Nm · Certification: NSF P1, DVGW Brand: MARSTONContent: 10 gThread: max. M36Strength class: mediumTemperature: -55 to +150 ° CViscosity: highly viscousPackaging: Bottle

£4.99*

Lock adapter including adapter for side case carrier for Alu side case Standard/Exclusiv (piece)

Replacement lock adapter including angled plate for Hepco&Becker Aluminum CasesNecessary for proper insertion of the locking mechanism into the carrier Typically included with the case, but serves as a replacement part

£39.47*

Toolbox for side carrier Cutout, Lock-it and permanent mounted universal kit

Inside dimensions: 29x8 cm (length / diameter) Dimensions: 32x9 cm Volume: 1.5 liters it is model-specific mounted on the inside of a side luggage carrier to utilize this space model-specific mounting kit waterproof screw cap perfect for driving tools, safety vests or similar matters.

£56.27*

Paint repair set black matt

for repairing minor paint damage on powder-coated surfacesscope of delivery: 1x brush bottle with the corresponding shadepre-treatment: the surface must be clean, free of rust and grease. Sanding of the surface may be necessary.properties after drying: After the drying time, the color corresponds approximately to the original powder coating color. The degree of gloss underlies small fluctuations. Larger effect deviations must be expected with metallic shades.

£19.06*

Universal heat protection plate for Hepco & Becker side carrier

high quality stainless steel heat shield for mounting on the Hepco & Becker side carrierfits only on models where a connection bracket is mounted, as shown in the picture

£33.12*

Heat protection mat 240x150 mm for suitcases and bags

240x150 mm - can be cut to size for use on various suitcases and bagsSticks to all plastic, aluminum and PU-coated surfaces of our casesNot recommended for our Street, Street Reloaded, Legacay and leather bagsSelf-adhesiveMade from heat-resistant and durable material that effectively protects against extreme temperatures.Protects reliably against heat damage that can be caused by the exhaust or exhaust gases.Robust and durable

£17.25*

Paint repair set anthracite

£19.06*

wall holder Side carrier for right sided cases

Practical wall bracket to "store" your own Hepco&Becker luggage (Junior, Journey, Gobi, Xplorer and Xceed) on the wall.Not suitable for Xplorer Cutout sidecases!

£56.27*