Here you will find model-specific products and accessories for ROYAL ENFIELD Hunter 350 (2023-).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:
C-Bow carrier & luggage Sidecarrier for your Hunter 350
Protection & Crash bars for ROYAL ENFIELD Hunter 350
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for Hunter 350
As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags,
Topcases
and Tankbags
etc. are also linked as related products for their relative carriers.
Handlebar Risers for Royal Enfield Hunter 350 (2023-) by Hepco&Becker
With handle riser or handlebar risers with offset, you can adjust your Sitting posture on the motorcycle to better suit your needs, allowing for a more relaxed and comfortable riding position.
The handlebar risers and relocations seamlessly and inconspicuously blend into the overall design of the motorcycle and boosts ergonomics, supporting your posture and reducing strain.
super easy installation, including Installation instructions
TÜV approved, including general operating licence (no registration required)
the high quality of Hepco&Becker
various designs depending on your model: spacers or sleeves under the handlebar clamps;
under handlebar risers for use with the original upper clamp;
handlebar risers with lower and upper clamp.
Handlebar Risers for Royal Enfield Hunter 350 (2023-) by Hepco&Becker
With handle riser or handlebar risers with offset, you can adjust your Sitting posture on the motorcycle to better suit your needs, allowing for a more relaxed and comfortable riding position.
The handlebar risers and relocations seamlessly and inconspicuously blend into the overall design of the motorcycle and boosts ergonomics, supporting your posture and reducing strain.
super easy installation, including Installation instructions
TÜV approved, including general operating licence (no registration required)
the high quality of Hepco&Becker
various designs depending on your model: spacers or sleeves under the handlebar clamps;
under handlebar risers for use with the original upper clamp;
handlebar risers with lower and upper clamp.
Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
A flying rock or a short off-road-trip can destroy an expensice headlight. Our Hepco&Becker headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
Universal fit thanks to the flexible belt connection. For models for which we cannot offer a model-specific tank ring.
Dimensionally stable thanks to high-density EVA foams, tear-resistant Hypalon and 840D ballistic polyester.
Lockable zippers
Robust handle
Water-repellent outer material
Additional compartments with a mesh compartment inside the lid
Small reflective details for better visibility in traffic
Removable, waterproof inner sack with roll top closure - easy to remove with snap fasteners
Volume expansion through all-round zipLoops on the tankbag for attaching optional, individual accessories such as the Hepco & Becker card / smartphone case
C-Bow sidecarrier for Royal Enfield Hunter 350 (2023-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
The classic tube rear carriers from Hepco&Becker are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction made of German quality steel, HEPCO&BECKER tube topcasecarriers ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If necessary, soft luggage can be easily secured. The tube luggage rack offers many options for this. If there isn't enough space, the rack can be combined with the Hepco&Becker universal rear rack enlargement.
Recommended load: 5kg (Please note the model-specific instructions for the respective rack, as well as the motorcycle manufacturer-specific specifications
Can usually be easily combined with side case carriers or C-Bow sidecarriers (see manual)
Includes installation material and mounting instructions
MADE IN GERMANY
Not suitable for topcases, only suitable for soft bags!
small tankbag for smartphone, pocket or other small things
normal magnet attachment on metal tank
not combinable with lock-it tankring
small card compartment
incl. rain cover
capacity enlargement due to all-around-zipper
