The Hepco&Becker Lock-it side case carrier has been designed to meet the highest standards. It is made of German steel tubing and custom laser-cut parts that are additionally reinforced at highly stressed points. These carriers can be attached and removed in no time. To do so, simply loosen the integrated Lock-it screws by a quarter turn, and the side parts can be removed to the rear or to the side. For additional theft protection, you can optionally secure the carrier with our lockable Lock-it screws to deter thieves. All cases are secured to the carrier using a built-in lock on the case itself. To do this, you need the lock adapters, which are usually included with the cases. These lock adapters are screwed onto the carrier on the right and left sides and provide a mounting point for the case locks. This sturdy side case carrier is made in Germany and is characterized by its high-quality construction. It can be quickly removed, leaving only inconspicuous small tabs on the motorcycle. Installation is usually straightforward – please refer to the included installation manual for details. The package includes the right and left sides of the carrier, along with all necessary mounting materials and an installation manual. Please check for any specific vehicle-related restrictions or refer to the installation manual. This carrier is suitable for most Hepco&Becker hard shell side cases (please note model-specific instructions). Luggage systems of this kind typically do not require a general operating permit (ABE) or registration. The tube diameter is 16 mm.

The Hepco&Becker Lock-it side case carrier is constructed from German steel tubing and custom laser-cut parts, which are reinforced at high-stress points. These carriers allow for quick attachment and removal. You simply need to loosen the Lock-it screws, which are attached to the carrier, by a quarter-turn, and the side panels can be easily removed to the rear or to the side. As an optional theft protection measure, you can use our lockable Lock-it screws to secure the carrier against theft. All cases are locked to the carrier using a locking mechanism located on the case itself. For this, lock adapters are usually included in the case's packaging. These lock adapters are bolted to the right and left sides of the carrier, providing a secure attachment point for the case locking mechanisms. The carriers feature a sturdy construction, made in Germany. They can be quickly removed, leaving only inconspicuous small tabs on the motorcycle. The surface finish is of high quality, and installation is generally straightforward. Please refer to the included installation instructions for detailed guidance. The side case carrier is compatible with most Hepco&Becker hard-shell side cases, with specific model notes to consider. Typically, luggage systems of this kind do not require ABE certification or registration, and the carrier has a tube diameter of 16 mm.

high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if availableThe black luggage rack extension is specifically designed for the KTM 1050 Adventure and the KTM 1190 Adventure/R (2013-). With this sturdy aluminum plate, the luggage capacity of the motorcycle can be expanded to securely carry larger luggage items on the luggage rack. The luggage rack extension features a high-quality aluminum construction, providing both strength and an appealing appearance. The raised edges and additional mounting points ensure secure fixation of the luggage, allowing for easy transportation of larger luggage rolls, travel bags, tents, duffel bags, and more. Installation is straightforward, and the luggage rack extension comes with all necessary mounting materials and a user-friendly manual. It is recommended to pay attention to the model-specific guidelines and the manufacturer's load capacity recommendations to maintain the safety and stability of the motorcycle. The luggage rack extension is not suitable for mounting top cases and is intended to enhance the flexibility of carrying luggage on the KTM 1050 Adventure and the KTM 1190 Adventure/R (2013-).

The black Alurack top case carrier has been specifically designed for the KTM 1050/1190 Adventure/R (2013-). It consists of a model-specific installation kit and an aluminum adapter plate that allows for the attachment of Hepco&Becker top cases or soft luggage (not suitable for top cases with a universal plastic base plate). Each Alurack top case carrier is model-specific and seamlessly integrates into the harmonious overall appearance of the motorcycle. Constructed from high-quality aluminum combined with a steel base carrier, the Alurack boasts high strength and a premium look. Additional attachment points for luggage straps, such as for securing luggage rolls, are integrated into the rack's design. The sturdy base construction made from steel and aluminum support plate ensures stability and durability. The package includes the model-specific Alurack top case carrier, a mounting kit, and an installation manual. No additional adapters are required for attaching the top case. The high-quality surface finish gives the carrier an appealing appearance. In technical terms, the Alurack top case carrier functions similarly to the Easyrack top case carrier, with the difference that the bracket for the top case attachment remains fixed in an upright position and cannot be folded down. The model-specific base carrier is identical for both the Easyrack and Alurack. To mount the Hepco&Becker Alu Standard top case 35, a special bracket is required in place of the standard Alurack bracket (item number: 700007350 or 700007351). Luggage carriers of this type generally do not require a general operating permit (ABE) or registration. The recommended load capacity is 5 kg, with model-specific instructions to be found in the installation manual and the motorcycle manufacturer's specifications. Please note that heavy luggage should not be transported in the top case but in the side cases or tank bag. The recommended maximum speed is 130 km/h. The carrier was developed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.

The black Easyrack top case carrier is designed for the KTM 1050 Adventure and 1190 Adventure/R models from the year 2013 onwards. This carrier significantly enhances the transportation capabilities of your motorcycle. It consists of a specially tailored installation kit and an Easyrack adapter plate, enabling the mounting of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack seamlessly integrates into the appearance of your KTM 1050 Adventure or 1190 Adventure/R. The use of high-quality aluminum in combination with a sturdy steel base ensures durability and gives your motorcycle an appealing look. Additional attachment points in the design allow for secure mounting of luggage rolls or other accessories. Included in the package are the model-specific carrier, an installation kit, and a detailed installation manual. No additional adapters are required for the secure mounting of Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically the same as that of the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, while the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for easy installation. The luggage carrier is exempt from ABE or registration requirements and complies with all relevant legal regulations. The recommended load capacity is 5 kg. Please follow the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in a top case or a backpack to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

Our black headlight guard for the KTM 1050/1190 Adventure/R (2013-) not only provides reliable protection for your headlight but also gives your motorcycle a rugged and adventurous look. This headlight guard is specifically designed for the KTM 1050 Adventure, KTM 1190 Adventure, and KTM 1190 Adventure R models, complementing the design of your bike perfectly. The headlight guard shields your headlight from stone impacts, dirt, and other external elements that may occur during your rides. At the same time, it adds a unique touch to your KTM 1050/1190 Adventure/R, emphasizing the distinctive style of these models. Installation is easy and straightforward, as the headlight guard attaches to the existing mounting points on your motorcycle. Crafted from high-quality steel, it features a durable black coating that protects against corrosion and ensures a long-lasting lifespan. Please note that this headlight guard is supplied without TÜV approval. Make sure to adhere to the applicable local regulations and laws when using it.

Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessoriesThe silver engine guard for the KTM 1190 Adventure R (2013-) provides your motorcycle with robust protection against stone chips, dirt, and other obstacles that may occur during your adventure rides. Made from high-quality aluminum, this engine guard is particularly durable and long-lasting. It is specifically designed for the KTM 1190 Adventure R and perfectly complements the motorcycle's shape. The engine guard protects the engine block and other important parts of your motorcycle from damage that can be caused by flying stones or uneven terrain during off-road adventures. This allows you to enjoy worry-free off-road tours and embrace your adventures. In addition to its protective effect, the engine guard also adds a sporty look to your motorcycle. It emphasizes the adventurous character of the KTM 1190 Adventure R and gives it an individual touch. The installation of the engine guard is simple and secure. All necessary mounting parts are included, allowing you to easily attach the guard. Please refer to the assembly instructions and model-specific notes to ensure a perfect fit. Ensure additional protection and give your KTM 1190 Adventure R a sporty appearance – with the silver engine guard for the 1190 Adventure R (2013-).

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised