KAWASAKI Vulcan S Accessories

Engine protection: crash bar for Kawasaki Vulcan S from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time travelling around town, a motorbike crash bar is no longer just a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Kawasaki Vulcan S and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2015-2016Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Kawasaki Vulcan S leftEngine guard for Kawasaki Vulcan S right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Engine protection: crash bar for Kawasaki Vulcan S from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time travelling around town, a motorbike crash bar is no longer just a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Kawasaki Vulcan S and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2017-Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Kawasaki Vulcan S leftEngine guard for Kawasaki Vulcan S right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Thanks to the comfortable back cushion, the pillion passenger can travel more relaxed and is given a feeling of safety.high-quality surface finishcan usually be combined with the corresponding C-Bow holders, leather bag holders or pannier racks without any problems (please note the vehicle-specific information and the installation instructions)Luggage systems generally do not require an ABE or registration

A Hepco&Becker sissy bar with luggage rack makes it easy to carry small items of luggage. An optional aluminium luggage rack extension (item number 800000) ensures secure attachment of our handbags or other wide items of luggage.not suitable for topcases!high-quality surface finishRecommended payload: 5kg (please observe the installation instructions provided, as well as vehicle-specific information or the motorbike manufacturer's specifications)can usually be combined with the corresponding C-Bow holders, leather bag holders or pannier racks without any problems (please note the vehicle-specific information and the installation instructions for restrictions)incl. installation material and installation instructionsLuggage systems generally do not require an ABE or registration

Basic tank ring for Kawasaki Vulcan S (2015-)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring as well as the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for Kawasaki Vulcan S (2015-) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

C-Bow side bag holder for Kawasaki Vulcan S (2015-) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration

Guaranteed more relaxed travelling by replacing the passenger seat with a Solorack. The Hepco&Becker Solorack offers the option of securely lashing down small items of luggage.We already have the matching Solorack handbag in our range (item number 620995), which is the perfect complement to the Solorack.high-quality surface finishstable construction MADE IN GERMANYRecommended payload: 3-5kg (please observe the installation instructions provided, as well as vehicle-specific instructions and motorbike manufacturer information)no registration or ABE required

Guaranteed more relaxed travelling by replacing the passenger seat with a Solorack. The Hepco&Becker Solorack offers the option of securely lashing down small items of luggage.We already have the matching Solorack handbag in our range (item number 620995), which is the perfect complement to the Solorack.high-quality surface finishstable construction MADE IN GERMANYRecommended payload: 3-5kg (please observe the installation instructions provided, as well as vehicle-specific instructions and motorbike manufacturer information)no registration or ABE required

NOTE: This Legacy rear bag set has been specially developed for some Hepco&Becker solo racks. You can find out whether this set fits your motorbike in the "My bike" section.Set consists of Legacy tank bag/tail bag, Basic counter holder, Basic attachment and mounting adapter (Solorack not included)reinforced side walls and lid for shape retentionsturdy EVA base shell, covered with Lycrastretch2-way zip (lockable with e.g. small combination lock)Recommended load: 3-5kg (Please observe the model-specific information on the respective carrier as well as the motorbike manufacturer-specific information. Heavy luggage should generally not be transported in the handbag, but in the side cases or the tank bag.