TRIUMPH Rocket III Accessories

C-Bow side bag holder for Triumph Rocket III (2004-2010) / Rocket III Roadster (2011-2017) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

C-Bow side bag holder for Triumph Rocket III (2004-2010) / Rocket III Roadster (2011-2017) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

The bolt-on side case carriers from Hepco&Becker are firmly attached to the motorbike frame. Almost all Hepco&Becker touring side case systems fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. A lock adapter is also required for this. This is normally supplied with the side cases. This lock adapter is screwed to the right and left at the rear of the carrier and provides the mount for the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any problems. Please refer to the fitting instructions and the model-specific information.Tubular steel construction MADE IN GERMANYfirmly bolted to the motorbike framehigh-quality surface finishFits most Hepco&Becker hard-shell side cases (please refer to the model-specific instructions for the respective carrier for any restrictions that may apply)Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product)Scope of delivery: right + left incl. mounting material and instructionsLuggage systems generally do not require an ABE or registrationTube diameter: 16 mm

MADE IN GERMANYScope of delivery: right + left incl. mounting material and instructionsfor many Hepco&Becker leather bagsMounting of the bags either via quick-release fastener, or by fixed mountingin the case of fixed mounting, the leather bags are then firmly screwed to the carrier, a fixed mounting kit is automatically included with the leather bagwith the quick-release fastener solution, the leather panniers must be adapted to the specific model, as each model-specific leather pannier holder is shaped differentlyWe recommend proper and professional assembly by our saddlers at our factoryQuick-release fastener factory assembly item number: 700402Quick release self-assembly item number: 700403Recommended payload: 5-7kg per case (Please note the model-specific information on the respective carrier and the motorbike manufacturer-specific information)If you want to buy a new carrier for a different motorbike and you still have old leather bags with a fastening system from the old carrier, these bags will most likely not fit the new carrier, as each carrier is individually shaped and model-specific.However, we can also remedy this situation. Send us the leather bags with an accompanying letter before ordering. We will then send you a quotation. We can then replace the rear panels of the Hepco&Becker leather bags and fit new ones; model-specific quick-release fastener included. Note:Leather bags in the C-Bow version do not fitHepco&Becker side cases or aluminium cases do not fit

Guaranteed more relaxed travelling by replacing the passenger seat with a Solorack. The Hepco&Becker Solorack offers the option of securely lashing down small items of luggage.We already have the matching Solorack handbag in our range (item number 620995), which is the perfect complement to the Solorack.high-quality surface finishstable construction MADE IN GERMANYRecommended payload: 3-5kg (please observe the installation instructions provided, as well as vehicle-specific instructions and motorbike manufacturer information)no registration or ABE required

Guaranteed more relaxed travelling by replacing the passenger seat with a Solorack. The Hepco&Becker Solorack offers the option of securely lashing down small items of luggage.We already have the matching Solorack handbag in our range (item number 620995), which is the perfect complement to the Solorack.high-quality surface finishstable construction MADE IN GERMANYRecommended payload: 3-5kg (please observe the installation instructions provided, as well as vehicle-specific instructions and motorbike manufacturer information)no registration or ABE required

Basic tank ring for Triumph Rocket III/Roadster (2011-2017)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for Triumph Rocket III/Roadster (2011-2017) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.