My bike MZ Accessories

The bolt-on side case carriers from Hepco&Becker are firmly attached to the motorbike frame. Almost all Hepco&Becker touring side case systems fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. A lock adapter is also required for this. This is normally supplied with the side cases. This lock adapter is screwed to the right and left at the rear of the carrier and provides the mount for the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any problems. Please refer to the fitting instructions and the model-specific information.Tubular steel construction MADE IN GERMANYfirmly bolted to the motorbike framehigh-quality surface finishFits most Hepco&Becker hard-shell side cases (please refer to the model-specific instructions for the respective carrier for any restrictions that may apply)Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product)Scope of delivery: right + left incl. mounting material and instructionsLuggage systems generally do not require an ABE or registrationTube diameter: 16 mm

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

The Hepco&Becker complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier), is firmly bolted to the motorbike and can only be mounted together. This carrier offers the possibility to mount almost all Hepco&Becker side cases. Almost all of our top cases can be mounted on the tubular luggage rack.The side cases are locked to the rack using a retaining lock. The lock adapters required for this, which are screwed to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorbike and reinforced with special inner tubes in areas subject to high stress.Tubular steel construction Made in Germanyfirmly bolted to the motorbikehigh-quality surface coatingcan only be mounted together as a setsuitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructionsScope of delivery: carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructionsTube diameter: 16 mmLuggage carriers do not require an ABE and are registration-free

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration

Proven tubular luggage racks Top case carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate. The carriers are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco&Becker universal luggage rack extension. The top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5kg (Please note the model-specific information on the respective carrier and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration