With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 22 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.3 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities. for universal mounting to engine guards and tank guards high stability very low weight abrasion-resistant coating water-repellent and incl. smaller waterproof bag on the inside lockable 2-way zipper Recommended max. speed 130km / h

The problem of bag mounting on supersportlers is known to all. HEPCO&BECKER also has a fitting solution for this: the Sportrack, which is anchored in the original image instead of the pillion seat and is opened by means of a vehicle ignition key. The all-round fastening options for luggage straps provide a secure hold for all conceivable items of luggage. Extendable with a rear enlargement also suitable for large luggage bags.The look of the Sportrack is like a passenger seat cover and is by its design an additional optical highlight. The drivers fun remains undisturbed by the secure attachment of the luggage directly behind the driver and does not affect the driving behavior of the machine in any way.High quality powder coatingeasy constructionScope of delivery: Sportrack, mounting bracket, mounting kit, manualRecommended load: 5kg (please pay attention to vehicle-specific instructions, as well as the attached instructions and the motorcycle manufacturer's data)For topcases only in combination with our Journey Topcases 30/40/50 in universal version with plastic plate. Normal Hepco & Becker Topcases do not fit!Can be combined with our rear bags with Basic fastening adapter An ABE or registration is not requiredPlease refer to the attached installation instructions

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info