My bike YAMAHA Accessories
Here you will find model-specific products and accessories for My bike YAMAHA
Depending on availability for your bike – you can find the following example products and more here:
- C-Bow carrier & luggage Sidecarrier for your My bike YAMAHA
- Protection & Crash bars for My bike YAMAHA
- Luggage racks and top case carriers like the Easyrack or Alurack
- Specific solutions like our Sportrack or Smartrack for the rear
- The mounting ring for a tank bag for My bike YAMAHA
As well as many other comfort and accessory items for your Motorcycle!
Compatible Panniers, Topcases, Tankbags etc. are also linked as related products for their relative carriers.
Nova LED additional headlight set incl. universal attachment
£268.40*
With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova.
High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts
ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation)
Improved traffic light conditions
Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging
Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set
Connection is only via the battery, no connection to the vehicle wiring harness is required
No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote:
The lights can only be switched on approx. 5-15 seconds after the engine has been started. A
voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit.
In older vehicles, this can be achieved by briefly increasing the engine speed.
Switching off must be done manually using the switch. The NOVA LEDs continue to light up until
the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage
falls below this limit do the lights switch off automatically via the control unit. When switching
on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.
Front protection bar anthracite for Yamaha MT-07 (2021-2024)
£207.70*
For selected motorcycle models from 125ccm to 750ccm, commonly and frequently used in driving schools, we also offer special
HEPCO&BECKER front- and rearguards, which of course can be combined with our other crash bars.
provides protection in case of accidents and falls
effectively protects turn signals, clutch and brake levers, mufflers, fairings, fenders, etc.
components are available as spare parts
reinforced tube-in-tube construction with high quality powder coating
idealy combined with our handle protection, engine guard and rear protection bar
Engine protection bar black for Yamaha MT-125 (2020-)
£203.80*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Front protection bar black for Yamaha MT-125 (2020-)
£207.70*
For selected motorcycle models from 125ccm to 750ccm, commonly and frequently used in driving schools, we also offer special
HEPCO&BECKER front- and rearguards, which of course can be combined with our other crash bars.
provides protection in case of accidents and falls
effectively protects turn signals, clutch and brake levers, mufflers, fairings, fenders, etc.
components are available as spare parts
reinforced tube-in-tube construction with high quality powder coating
idealy combined with our handle protection, engine guard and rear protection bar
Center stand for Yamaha Ténéré 700 / Rally (2019-2024)
£216.37*
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info
Tank guard "Solid" black for Yamaha Ténéré World Raid (2022-2024) /World Rally (2023-2024)
£275.35*
Ideal for extreme terrain: the engine protection bar Solid, which stands out due to its 3-point connection to the motorcycle frame and additional stiffening plates at the lower node. Optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain.
protection during pushovers or falls
helps to tying up the motorcycle
premium surface finish
easy assembly
delivery: right side, left side, mounting kit and manual
high quality german steel tube
please check manual or bike specific note for more info
Minirack soft luggage rear rack for Yamaha XSR 125 (2021-)
£184.28*
The slim, light and inconspicuous luggage solution from Hepco&Becker. The Minirack offers a way to individually attach soft luggage to the rear of the motorcycle. A backpack or bag can be lashed through side slits.solid steel tube carrierhigh quality aluminium plateeasy mountingincl. mounting kit and manualhigh quality surface finishthe Minirack system is also mentioned in our Topcasecarrier video:
Universal crash bar bags V1 (set)
£125.32*
Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities.
for universal mounting to engine guards and tank guards
high stability
very low weight
abrasion-resistant coating
water-repellent and incl. smaller waterproof bag on the inside
lockable 2-way zipper
Recommended max. speed 130km / h
Tankguard "Rally" black for Yamaha Yamaha Ténéré 700 / Rally / Xtreme (2019-2024)
£285.75*
Ideal for extreme terrain: the tank guard Rally, which stands out due to its 5-point connection to the motorcycle frame and additional stiffening plates at the lower node. The 2-fold front joining and bolting of the tube-halves leads to an optimal distribution of forces in the event of an overturn or fall. Close-fitting and sporty design with the best possible force dissipation into existing frame points. The bracket can be combined with the original skid plate. The innovative design with the high-strength plastic coating is unmistakable. With the function clearly in focus, it becomes clear: this tank guard was developed for tough, uncompromising use in difficult terrain.
protection during pushovers or falls
helps to tying up the motorcycle
premium surface finish
easy assembly
delivery: right side, left side, mounting kit and manual
high quality german steel tube
please check manual or bike specific note for more info
Handle guard set black (left+right side) for Yamaha Ténéré 700 / Rally (2019-2024)
£151.77*
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps
please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.
Tankguard black for Yamaha Ténéré 700 (2019-2024)
£189.92*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Engine protection bar anthracite for Yamaha MT-07 (2021-2024)
£203.80*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Front protection bar black for Yamaha MT-03 (2020-)
£207.70*
For selected motorcycle models from 125ccm to 750ccm, commonly and frequently used in driving schools, we also offer special
HEPCO&BECKER front- and rearguards, which of course can be combined with our other crash bars.
provides protection in case of accidents and falls
effectively protects turn signals, clutch and brake levers, mufflers, fairings, fenders, etc.
components are available as spare parts
reinforced tube-in-tube construction with high quality powder coating
idealy combined with our handle protection, engine guard and rear protection bar
Engine protection bar black for Yamaha MT-03 (2020-) (Please inform us about year of production of the bike!)
£203.80*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Engine protection bar black incl. protection pads for Yamaha Tracer 9 / GT (2021-2024)
£212.03*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Engine protection bar black for Yamaha Ténéré 700 (2019-2024)
£193.39*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Headlight grill for Yamaha Ténéré 700 / Rally (2019-2024)
£99.30*
A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
Engine protection bar black for Yamaha Tracer 7 / 700 / GT (2020-)
£220.71*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Rear protection bar lock-it black for Yamaha MT-07 (2021-2024)
£221.15*
For selected motorcycle models from 125ccm to 750ccm, commonly and frequently used in driving schools, we also offer special
HEPCO&BECKER front- and rearguards, which of course can be combined with our other crash bars.
provides protection in case of accidents and falls
effectively protects turn signals, clutch and brake levers, mufflers, fairings, fenders, etc.
components are available as spare parts
reinforced tube-in-tube construction with high quality powder coating
idealy combined with our handle protection, engine guard and rear protection bar
C-Bow sidecarrier for Yamaha XSR 125 (2021-)
£207.70*
C-Bow sidecarrier for Yamaha XSR 125 (2021-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
C-Bow sidecarrier for Yamaha Ténéré 700 / Rally (2019-2024)
£190.35*
C-Bow sidecarrier for Yamaha Ténéré 700 / Rally (2019-2024)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
Kickstand enlargement for Yamaha Ténéré 700 / Rally (2019-2024)
£51.60*
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
Engine protection bar black for Yamaha XSR 125 (2021-)
£203.80*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Engine protection bar black for Yamaha XT 600 Ténéré (1988-1990)
£238.05*
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info