HONDA CRF 1100 L Africa Twin Adventure Sports Accessories
Here you will find model-specific products and accessories for HONDA CRF 1100 L Africa Twin Adventure Sports (2020-2023).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:
C-Bow carrier & luggage Sidecarrier for your CRF 1100 L Africa Twin Adventure Sports
Protection & Crash bars for HONDA CRF 1100 L Africa Twin Adventure Sports
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for CRF 1100 L Africa Twin Adventure Sports
As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags,
Topcases
and Tankbags
etc. are also linked as related products for their relative carriers.
With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova.
High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts
ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation)
Improved traffic light conditions
Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging
Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set
Connection is only via the battery, no connection to the vehicle wiring harness is required
No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote:
The lights can only be switched on approx. 5-15 seconds after the engine has been started. A
voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit.
In older vehicles, this can be achieved by briefly increasing the engine speed.
Switching off must be done manually using the switch. The NOVA LEDs continue to light up until
the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage
falls below this limit do the lights switch off automatically via the control unit. When switching
on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.
Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps
please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Suitable for many different Hepco&Becker engine / tank guards and a useful addition for all those who want to make optimum use of their luggage storage facilities.
for universal mounting to engine guards and tank guards
high stability
very low weight
abrasion-resistant coating
water-repellent and incl. smaller waterproof bag on the inside
lockable 2-way zipper
Recommended max. speed 130km / h
In order to make our tank guard for the Africa Twin even more stable, we now offer an additional bracket which fixes the tank guard in the event of a fall. Thus, the side cladding parts are also better protected.
Black powdercoated
Solid steel construction
Even more stability of the tank guard
Picture shows the uncoated prototype version
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack
Stable HEPCO&BECKER aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available
Inside dimensions: 29x8 cm (length / diameter)
Dimensions: 32x9 cm
Volume: 1.5 liters
it is model-specific mounted on the inside of a side luggage carrier to utilize this space
model-specific mounting kit
waterproof screw cap
perfect for driving tools, safety vests or similar matters.
HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany
Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info
Sidecarrier Set for Honda CRF 1100L Africa Twin (2019-2023) Cutout incl. Xplorer sidecasesSet of a model-specific, stainless steel sidecarrier on both sides in combination with a Xporer 40 liter and
a recessed Xplorer 37 liter case including key, cylinder and the required lock adapters to attach the cases to the carrier
Features Xplorer Cutout Set:
recessed 37 liter side case on the muffler side
40 liter side case on the other side
high-impact plastic and anodized aluminum sheets in the composite
incl. keys and cylinders
absolutely watertight
wide range of accessories available
Features sidecarrier stainless steel:
adventure-compatible, weather resistant and firmly bolted sidecarrier made out of stainless steel
blasted and electro-polished surface finish
incl. mounting material and manual
The Hepco&Becker Alurack is especially designed for our top cases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker top cases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the top case (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker top caseAttention: Hepco&Becker top case with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker top cases with a metal look on the bottomcan mostly be combined with C-Bow side carrier or normal hard lugagge side carrier: Please check manual or bike specific infoDifference to the Easyrack top case carrier: the bow which stands upwards for the top casemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350
Sidecarrier Set for Honda CRF 1100L Africa Twin (2019-2023) Cutout incl. Xplorer sidecasesSet of a model-specific, stainless steel sidecarrier on both sides in combination with a Xporer 40 liter and
a recessed Xplorer 37 liter case including key, cylinder and the required lock adapters to attach the cases to the carrier
Features Xplorer Cutout Set:
recessed 37 liter side case on the muffler side
40 liter side case on the other side
high-impact plastic and anodized aluminum sheets in the composite
incl. keys and cylinders
absolutely watertight
wide range of accessories available
Features sidecarrier stainless steel:
adventure-compatible, weather resistant and firmly bolted sidecarrier made out of stainless steel
blasted and electro-polished surface finish
incl. mounting material and manual
Sidecarrier Cutout for Honda CRF 1100L Africa Twin (2019-2023)Features carrier:Adventure-proof, weather-resistant and firmly screwed side case carrier made of stainless steelsandblasted and electropolished surface finishScope of delivery: left + right + mounting material + instructionsonly the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carriernormal Xplorer cases and other Hepco&Becker cases do not fit
Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.