SUZUKI V-Strom 1050 XT Accessories

Here you will find model-specific products and accessories for SUZUKI V-Strom 1050 XT (2020-2022).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:

C-Bow carrier & luggage Sidecarrier for your V-Strom 1050 XT
Protection & Crash bars for SUZUKI V-Strom 1050 XT
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for V-Strom 1050 XT

As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags, Topcases and Tankbags etc. are also linked as related products for their relative carriers.

Engine protection plate aluminium for original engine guard for Suzuki V-Strom 1050 XT (2020-2022)

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.HEPCO&BECKER skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

£173.01*

Engine protection plate black for combination with original engine guard for Suzuki V-Strom 1050 XT (2020-2022)

£173.01*

Supporting strut for original rear rack for Suzuki V-Strom 1050 / XT (2020-2022)

High-quality support strut for the original rack of the Suzuki V-Strom 1050 / XT (2020-2022).

£54.63*

Sidecarrier permanent mounted black for Suzuki V-Strom 1050/XT (2020-2022)

HEPCO&BECKERs standard side carriers are firmly bolted to the motorcycle. All normal hard lugagge cases from Hepco & Becker fit this carrier. The cases are fastened to the carrier by means of a quick release fastener. For this purpose, an aluminum adapter is required which is normally included within the delivery of the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and offer the holder for the luggage lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the driver, or the passenger, even in the event of a fall.The side case carriers from HEPCO&BECKER can usually be combined without problems with a tube topcase carrier or other rear racks systems from our company. Please refer to the mounting instructions.Construction of steel tube MADE IN GERMANYTightly bolted to the motorcyclesignal lights usually remain in the original position, but sometimes they must also be displaced (please note the mounting instructions for the product)Recommended load: 10kg per side case (please pay attention to model-specific instructions of the motorcycle manufacturer or instructions on the mounting instructions)Right + left incl. mounting kit and instructionsLuggage carriers do not require ABE or registration in Germany

£238.05*

Headlight grill for Suzuki V-Strom 1050 / XT (2020-2022)

A flying rock or a short off-road-trip can destroy an expensice headlight. Our HEPCO&BECKER headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

£116.65*

Kickstand enlargement for Suzuki V-Strom 1050 / XT (2020-2022)

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

£51.60*

Handle guard set black (left+right side) for Suzuki V-Strom 1050 XT (2020-2022)

Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information If a handlebar riser is installed, installation is also possible in most cases. Depending on the handlebar riser, longer screws are required for assembly. You have to get these screws yourself, as we don't have all the screws in all the right lengths.

£151.77*

Tankguard black for Suzuki Suzuki V-Strom 1050/XT (2020-2022)

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£258.00*

Easyrack topcasecarrier black for combination with original rear rack for Suzuki V-Strom 1050 / XT (2020-2022)

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

£169.11*

Modelspecific rear enlargement black for Suzuki V-Strom 1050 / XT (2020-2022)

Stable HEPCO&BECKER aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

£103.63*

Alurack top case carrier black for combination with original rear rack for Suzuki V-Strom 1050 / XT (2020-2022)

The Hepco&Becker Alurack is especially designed for our top cases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker top cases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the top case (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker top caseAttention: Hepco&Becker top case with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker top cases with a metal look on the bottomcan mostly be combined with C-Bow side carrier or normal hard lugagge side carrier: Please check manual or bike specific infoDifference to the Easyrack top case carrier: the bow which stands upwards for the top casemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350

£143.10*

Stiffening bracket black for tank guard 5023544 for Suzuki V-Strom 1050/XT (2020-2022)

optional for the tank protection barprovides additional stability

£55.50*

Center stand for Suzuki V-Strom 1050 / XT (2020-2022)

Steady. Stable. Easy to work. The HEPCO&BECKER center stands are extremely rugged and don't get in the way of your riding. The tension springs are made of stainless steel. Sophisticated geometry and anti-skid tread make it easy to stand your motorcylcle securely in any situation. The precisely manufactured stands are very stable, sandblasted, black powder coated and hold their value. Naturally, the're approved for the street. Center stands make maintenance easier and keep the bike stable, during fill-ups, for example. During winter storage, they take a load off the rear wheel.does mostly not limit bankingpricise manufacturingeasy assemblyQuality German steel tubingAccessories available: Special tool for fitting the spring more easily. part no: 700030Please also check manual for more info

£238.05*

Tankring BASIC incl. fastener for tankbag for Suzuki V-Strom 1050 / XT (2020-2022)

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

£32.95*