Let there be light! Motorbike auxiliary headlights LED NOVA
With the Nova LED auxiliary headlight set from HEPCO&BECKER, you get everything you need to improve the visibility and safety of your motorbike. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights.
The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorbike an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied.
Increase your safety and add an appealing design to your motorbike by using the HEPCO&BECKER LED motorbike auxiliary headlight set Nova.
The brand new LED auxiliary headlight Nova - the next step in lighting technology.
High-power LEDs with two switching levels at
2,500lm - 4,350K / - 5,500K
12 volt, 25 watts per headlight
ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation)
Improved lighting conditions in road traffic
Universal mounting on engine or tank protection bracket with Ø25mm - Ø32mm tube, can be mounted upright or suspended
complete headlight set; incl.
2x LED auxiliary headlights, 1x switch,
1x cable set, 2x clamps incl.
reduction sleeves, 1x instructions, 1x tool set
Connection only via the battery,
no connection to vehicle wiring harness required
No third-party operation thanks to special
control unit with automatic voltage control
Waterproof and dustproof to IP67Headlights can be added flexibly via the switch on the handlebarsPlease note:
The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the
wiring harness to enable the circuit
. In older vehicles, this can be achieved by briefly increasing the
speed.
Switching off must be done manually at the switch. The NOVA LEDs remain lit until
the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when
falls below this voltage limit do the lights switch off automatically via the
control unit. When switching on again (wait for the dwell time of the control unit),
the voltage limit of 13.1 V is queried again.
Download FAQ as PDF
The Hepco&Becker Twinlights, with 2x55 watt light output, guarantee an impressive appearance. They are not only an attractive addition, but also offer added safety. Naturally TÜV-free and with type approval.are switched on instead of the normal high beamwhen the high beam is on, a maximum of two headlights may be lit on the motorbikesimple installationScope of delivery: headlight set, model-specific bracket and mounting materialincl. ABEincl. bulb (halogen bulb H3 with flat plug connection, 55 watts)
Engine protection: crash bar for Indian Scout Sixty Bobber (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Bobber (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Bobber (2025-) leftEngine guard for Indian Scout Sixty Bobber (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Sixty Bobber (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Bobber (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Bobber (2025-) leftEngine guard for Indian Scout Sixty Bobber (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Sixty Bobber (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Bobber (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Bobber (2025-) leftEngine guard for Indian Scout Sixty Bobber (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Bobber (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Bobber (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Bobber (2025-) leftEngine guard for Indian Scout Bobber (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Bobber (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Bobber (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Bobber (2025-) leftEngine guard for Indian Scout Bobber (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Classic (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Classic (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Classic (2025-) leftEngine guard for Indian Scout Classic (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Classic (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Classic (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Classic (2025-) leftEngine guard for Indian Scout Classic (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Sixty Classic (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Classic (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Classic (2025-) leftEngine guard for Indian Scout Sixty Classic (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Sixty Classic (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Classic (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Classic (2025-) leftEngine guard for Indian Scout Sixty Classic (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Sixty Classic (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Sixty Classic (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Sixty Classic (2025-) leftEngine guard for Indian Scout Sixty Classic (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Sport Scout (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time in the city, a motorbike crash bar is no longer just a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Sport Scout (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Sport Scout (2025-) leftEngine guard for Indian Sport Scout (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Sport Scout (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time in the city, a motorbike crash bar is no longer just a beginner's accessory.
Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Sport Scout (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Sport Scout (2025-) leftEngine guard for Indian Sport Scout (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian 101 Scout (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian 101 Scout (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian 101 Scout (2025-) leftEngine guard for Indian 101 Scout (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian 101 Scout (2025-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian 101 Scout (2025-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian 101 Scout (2025-) leftEngine guard for Indian 101 Scout (2025-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Sport Scout Sixty (2026-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Sport Scout Sixty (2026-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2026-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Sport Scout Sixty (2026-) leftEngine guard for Indian Sport Scout Sixty (2026-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Sport Scout Sixty (2026-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Sport Scout Sixty (2026-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2026-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Sport Scout Sixty (2026-) leftEngine guard for Indian Sport Scout Sixty (2026-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Sport Scout Sixty (2026-) from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Sport Scout Sixty (2026-) and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: ChromeFor model year(s): 2026-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Sport Scout Sixty (2026-) leftEngine guard for Indian Sport Scout Sixty (2026-) right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Chief Dark Horse / Chief Bobber Dark Horse / Super Chief Limited / Sport Chief from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Chief Dark Horse / Chief Bobber Dark Horse / Super Chief Limited / Sport Chief and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2022-Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Chief Dark Horse / Chief Bobber Dark Horse / Super Chief Limited / Sport Chief leftEngine guard for Indian Chief Dark Horse / Chief Bobber Dark Horse / Super Chief Limited / Sport Chief right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout/Sixty from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout/Sixty and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: high-gloss chrome plating.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: Elegant, high-gloss chromeColour: Chrome, high-gloss silverFor model year(s): 2015-2024Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout/Sixty leftEngine guard for Indian Scout/Sixty right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated fitting instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout/Sixty from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout/Sixty and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2015-2024Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout/Sixty leftEngine guard for Indian Scout/Sixty right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated fitting instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Bobber / Sixty / Twenty / Rogue from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Bobber / Sixty / Twenty / Rogue and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: high-gloss chrome plating.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: Elegant, high-gloss chromeColour: Chrome, high-gloss silverFor model year(s): 2017-2024Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Bobber / Sixty / Twenty / Rogue leftEngine guard for Indian Scout Bobber / Sixty / Twenty / Rogue right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection: crash bar for Indian Scout Bobber / Sixty / Twenty / Rogue from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Indian Scout Bobber / Sixty / Twenty / Rogue and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2017-2024Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for Indian Scout Bobber / Sixty / Twenty / Rogue leftEngine guard for Indian Scout Bobber / Sixty / Twenty / Rogue right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222