Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

Discover the world of the Hepco&Becker Lock-it side case carrier in black for your Moto Guzzi Stelvio/NTX 1200 (2008-2016). This carrier is crafted from high-quality German steel tubing and custom laser-cut parts, which are reinforced at heavily stressed areas. What sets this carrier apart is its incredible user-friendliness. You can attach and detach it in a matter of seconds by simply loosening the integrated Lock-it screws by a quarter turn and removing the side panels to the rear or to the side. For added theft protection, we offer optional lockable Lock-it screws to deter would-be thieves. The attachment of the cases is done through the case's built-in locking mechanism, for which you typically require the lock adapter included in the case's package. These adapters are bolted to the carrier on the right and left sides, providing a secure anchor for the case locking mechanisms. The stable construction, made in Germany, ensures reliability and durability. After removing the carrier, only inconspicuous small tabs remain on the motorcycle. The high-quality surface finish gives the carrier an appealing look. Installation is generally straightforward, and for precise instructions, we recommend consulting the included installation manual. The package includes the carriers for the right and left sides, along with the necessary mounting hardware and a clear installation manual. Any limitations can be found in the vehicle-specific instructions or the installation manual. This carrier is compatible with most Hepco&Becker hard-shell side cases (please note model-specific guidelines). Luggage systems of this type generally do not require ABE (General Operating Permit) or registration. The tube diameter is 16 mm. Experience the freedom of travel with your Hepco&Becker Lock-it side case carrier!

If you own a Moto Guzzi Stelvio or Stelvio NTX 1200 (model year 2008-2016) and need additional storage space, the Easyrack Top Case Carrier in black is the perfect solution for you. This set includes a specially designed mounting kit for your model as well as an Easyrack adapter plate for attaching Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The Easyrack Top Case Carrier has been carefully developed to seamlessly blend into the overall design of your Moto Guzzi Stelvio/NTX 1200. Made from high-quality aluminum and a sturdy steel base construction, it offers not only high load capacity but also a stylish appearance. Additional attachment points are integrated into the design to facilitate the installation of luggage straps or other accessories. Included in the delivery are the model-specific Easyrack Top Case Carrier, a mounting kit, and a detailed installation manual. No additional adapters for top case attachment are required. The Easyrack Top Case Carrier functions similarly to the Alurack Top Case Carrier. One difference is that the bracket for top case attachment can be folded down when not in use, while the Alurack bracket remains fixed in an upright position. The use of the carrier does not require an additional General Operating Permit (ABE) or registration. The recommended load capacity is 5 kg. Please note model-specific guidelines in the installation manual and recommendations from the motorcycle manufacturer. Heavy loads should preferably be transported in the side cases or tank bag to ensure the stability of the motorcycle. The recommended top speed with the Easyrack Top Case Carrier is 130 km/h (approximately 80 mph) to ensure a safe ride. Please note that the carrier has been specifically designed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.

Elevate your Moto Guzzi Stelvio/NTX 1200 (2008-2016) with our black Alurack top case carrier! This top case carrier consists of a model-specific mounting kit and an Alurack adapter plate designed specifically for Hepco&Becker top cases or soft luggage (not compatible with top cases with universal plastic plates). Each Alurack top case carrier is designed to be model-specific and seamlessly integrates into the overall look of your motorcycle. Thanks to its high-quality aluminum construction combined with a steel base carrier, the Alurack not only offers strength but also an incredibly stylish appearance. Additional attachment points for luggage straps are integrated into the rack's design, allowing you to easily secure luggage rolls or other equipment. The solid base construction is made of steel and an aluminum carrier plate, and the package includes the model-specific Alurack top case carrier, the mounting kit, and a clear installation guide. No additional adapters are required for top case mounting. The high-quality surface finish adds to its appeal. The Alurack top case carrier operates technically almost the same as the Easyrack top case carrier, with the only difference being that the bracket for top case mounting is fixed upwards and not foldable. However, the model-specific base carrier is the same for both versions. To accommodate the Hepco&Becker Alu Standard Topcase 35, a special bracket is needed instead of the standard Alurack bracket (item number: 700007350 or 700007351). Our luggage carriers generally do not require ABE (General Operating Permit) or registration and are designed for a recommended load capacity of 5 kg. Please pay attention to the model-specific guidelines provided in the installation manual and the manufacturer's specifications. We recommend avoiding carrying heavy loads in the top case and instead use the side cases or tank bag for such items. The recommended maximum speed is 130 km/h. Please note that this carrier is designed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other turn signals.