Junior 40 side case set left/right
Product information "Junior 40 side case set left/right"
For many years, the undisputed sales champ - always comes in first comparison tests. Our Hepco&Becker Junior case series. It doesn't matter which version or size you pick: This series of cases - conceived ate target-sedign - is tailored to your needs. Robust and highly resilient htrough its double wall construction, it forgives rough landings, protects its content even during small jolts and is watertight. The case's side lid makes it optimal for loading. Two strong tension belts hold the content in place even when it's open.
- fits Hepco&Becker sidecase carrier
- completely watertight
- metal locks
- incl. cylinder and keys
- recommended load: 10kg each case (please check model specific informations for limitations)
- delivery: right side + left side + keys and locks
| Colour: | black |
|---|---|
| Packed volume: | 37 Liter |
| External dimensions (H x W x D): | 35 x 50 x 33 cm |
| Internal dimensions (H x W x D): | 25 x 41 x 27 cm |
| Material: | Polypropylene |
Zubehör
Easier loading before and at the end of a ride. There is no need to remove the whole case - just the inner bag. Made of hard-wearing black fabric with 2-way zipper and adjustable carrying strap.
Easier loading before and at the end of a ride. There is no need to remove the whole case - just the inner bag. Made of hard-wearing black fabric with 2-way zipper and adjustable carrying strap.
Heat Shield / Protection-Mat – self-adhesive for cases & bags Features: Due to its properties, not recommended for Street, Street Reloaded, Legacy and leather bags 240x150 mm – can be cut to fit various cases and bags Self-adhesive on all plastic, aluminum, and PU-coated surfaces of our cases Reliably protects against heat damage caused by the exhaust or fumes. Made of heat-resistant and durable material that effectively withstands extreme temperatures. Attention: Even with our heat protection mat installed, the exhaust jet must not be directed straight at cases or bags!
Silicone Spray special care for Plastic Surfaces Perfect for plastic care: makes faded cases look like new again! High-quality, colorless separating and lubricating agent Provides long-lasting care and protection without greasing Reliably prevents adhesives, glues, and paints from sticking to treated surfaces Quickly restores the sliding ability of plastic guide rails, rollers, and bearings Especially suitable for use in foundries, window construction, automotive trades, and the packaging industry Colorless Temperature range: -40 to +120°C Aerosol can Legal Notices H223 Flammable aerosol. H229 Pressurized container: may burst if heated.
Content: 0.4 Liter (£16.25 / 1 Liter)
Transparent Colour refresher for black engine parts, plastics, etc. S100 Colour refresher is a transparent colour refresher for quick, easy and lasting optical refurbishment of sun-bleached surfaces, such as black engine blocks, painted or unpainted metal parts and plastic parts. The product is temperature stable, dries with an even finish, and will withstand drives through rain and even several washes. Legal Notices DANGER Contains hydrocarbons. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Do not breathe spray. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Protect from sunlight. Do not expose to temperatures exceeding 50° C/122° F. Dispose of contents/container in accordance with local/regional/national/international regulations.
Content: 0.3 Liter (£47.70 / 1 Liter)
Ersatzteile
Please choose your key number for spare key.Only the listed keys are available. Attention: Key number 1xx has been replaced by key number 9xx. Keys numbered 1xx are the same as 9xx. (Example: 144=944) Keys with key number 1xx fit cylinders with number 9xx and vice versa.Keys with key numbers 001 to 010 do not fit old Junior suitcases.
Spare cylinder for all Hepco&Becker Topcases and sideboxes (except Universal Topcases with red button on lock, and Orbt Topcase) Delivery: 1x cyinder + 1x key key design can differ from pictureAttention: Key number 1xx has been replaced by key number 9xx. Keys numbered 1xx are the same as 9xx. (Example: 144=944) Keys with key number 1xx fit cylinders with number 9xx and vice versa. Cylinder for Universal Topcases with red button on lock are only to buy by mail request.
Lock to close the lidincl. key and lock cylinderLock number is written on the key (e.g. 924) incl. rivetsAttention: Key number 1xx has been replaced by key number 9xx. Keys numbered 1xx are the same as 9xx. (Example: 144=944) Keys with key number 1xx fit cylinders with number 9xx and vice versa.
Lock to lock the case to the carrierincluding key and lock cylinderLock number is on the key (e.g. 924)including rivetsAttention: Key number 1xx has been replaced by key number 9xx. Keys numbered 1xx are the same as 9xx. (Example: 144=944) Keys with key number 1xx fit cylinders with number 9xx and vice versa.
The original Hepco & Becker logo sticker with a diameter of 50mm
The original Hepco & Becker logo sticker with a diameter of 60mm.
Spare part
Spare part
The replacement base plate including lashing straps for the left Junior/Junior Flash side case 40.
The replacement base plate including lashing straps for the right Junior/Junior Flash side case.
This aluminum adapter is used to hold the case lock on hard-shell and aluminum cases from Hepco & Becker. The screws are included in the mounting kit for the pannier rack. If these screws are no longer available, please contact us in advance. You can take a look at the installation instructions provided with the product beforehand so that you also know which screws you need. Caution: Spacer plates are also required for the side cases Alu Standard and Alu Exclusiv. The following kit is required for this: 710081