With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

C-Bow sidecarrier for Zontes 125-C2 (2025-) The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check the manual for more info. Special carrier only for Hepco&Becker C-Bow bags and boxes Regular Hepco&Becker hard luggage does not fit Krauser K-Wing luggage does not fit High-quality surface finish Delivery: right side, left side, mounting kit, manual Easy mounting Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info) Rear rack enlargements can possibly restrict the function of the bags Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators. When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

Handlebar Risers for Zontes 125-C2 (2025-) by Hepco&Becker With handle riser or handlebar risers with offset, you can adjust your Sitting posture on the motorcycle to better suit your needs, allowing for a more relaxed and comfortable riding position. The handlebar risers and relocations seamlessly and inconspicuously blend into the overall design of the motorcycle and boosts ergonomics, supporting your posture and reducing strain. super easy installation, including Installation instructions TÜV approved, including general operating licence (no registration required) the high quality of Hepco&Becker various designs depending on your model: spacers or sleeves under the handlebar clamps; under handlebar risers for use with the original upper clamp; handlebar risers with lower and upper clamp.

The Hepco&Becker Alurack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Easyrack topcasecarrier: the bow which stands upwards for the topcasemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu Topcase Standard 35, you need a special bow adapter: 700007351 or 700007350

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

Set consisting of a model-specific carrier, as well as a Hepco&Becker universal top case. The plastic plate of the top case is mounted on the model-specific base carrier, on which the top case can then be plugged Top case lockable and waterproof Recommended payload: 5kg in the top case (please note the model-specific instructions, as well as the motorcycle manufacturer's instructions regarding possible restrictions) Baggage systems generally do not require registration, as well as ABE Recommended top speed: 130 km/h

Stable Hepco&Becker aluminium enlargement plate for extending almost any luggage rack when loose luggage needs to be transported instead of topcases. Its raised edges and additionals holding points make the extension ideal for carrying even larger luggage rolls, travel cases, tents duffels and more...high quality german aluminium productionpremium lookfastening options for luggage strapseasy assemblymodel specific version (Universal version also available part no: 610053)dimensions: approx: 390x230 mm or see picture with measurements if available

Handlebar Risers for Zontes 125-C2 (2025-) by Hepco&Becker With handle riser or handlebar risers with offset, you can adjust your Sitting posture on the motorcycle to better suit your needs, allowing for a more relaxed and comfortable riding position. The handlebar risers and relocations seamlessly and inconspicuously blend into the overall design of the motorcycle and boosts ergonomics, supporting your posture and reducing strain. super easy installation, including Installation instructions TÜV approved, including general operating licence (no registration required) the high quality of Hepco&Becker various designs depending on your model: spacers or sleeves under the handlebar clamps; under handlebar risers for use with the original upper clamp; handlebar risers with lower and upper clamp.

Basic tank ring for Zontes 125-C2 (2025-)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for Zontes 125-C2 (2025-) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

The slim, light and inconspicuous luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorcycle. A backpack or bag can be lashed through side slits. A backpack or bag can be secured using the side slots. Our rear bags with the Basic System can also be easily attached using an exchangeable module.suitable for rear bags with Basic fastening adapteradaptableincl. mounting kit and manualan ABE or registration is not necessaryhigh-quality powder coatingsolid construction