YAMAHA Tracer 9 Accessories

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps

Handlebar riser for Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) from Hepco&Becker With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installation naturally TÜV-tested and incl. ABE high quality precisely milled, model-specific handlebar risers for use with original upper clamps

Engine protection: crash bar for Yamaha Tracer 9 GT / GT+ / Y-AMT from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a variety of motorbikes, our crash bars fit perfectly into the existing lines of your Yamaha Tracer 9 GT / GT+ / Y-AMT and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2025-Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) leftEngine guard for Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Side stand extension Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt etc. Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your Tracer 9 is perfectly protected from mishaps when parking. Material: Aluminium & powder-coated steel Colour: silver / black Developed specifically for the Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) For model year(s): 2025- Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

Basic tank ring for Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for Yamaha Tracer 9 GT / GT+ / Y-AMT (2025-) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap in the direction of travel at the front of the tank bag and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

Motorbike model-specific holder for mounting various Hepco&Becker top cases (top cases with universal plate do not fit) Topcase carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker topcases or soft luggage (not suitable for topcases with universal plastic plate or Orbit topcase) Hepco&Becker Easyracks are specially designed for our topcases. As the successor to the tried and tested tubular luggage racks, the Easyrack is seen as a logical further development and is available for the younger generation of motorbikes. Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid construction Scope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructions no additional adapters are required for top case mounting high-quality surface finish Recommended payload: 5kg payload in the top case (please observe vehicle-specific information, the stored assembly instructions and motorbike manufacturer information) technically almost identical to the Alurack top case carrier, except that the bracket for holding the top case can be folded down when a top case is not in use the model-specific base carrier is the same for the Easyrack and Alurack Orbit top case and universal top cases with plastic pallet do not fit Luggage carriers do not require an ABE or registration

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Hepco&Becker Aluracks are specially designed for our top cases. As the successor to the tried and tested tubular luggage racks, the aluminium rack is seen as a logical further development and is available for the younger generation of motorbikes. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid constructionScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishRecommended payload: 5kg payload in the top case (please observe vehicle-specific information, the stored assembly instructions and motorbike manufacturer information)technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is rigidly positioned upwardsthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the aluminium standard top case 35 (article number: 700007350 or 700007351)Luggage carriers do not require an ABE or registration

Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.